Anchor Swivel Connector - 316 Stainless Steel suits 6-8mm Chain Subtotal: $41.75
BLA Cross Bollards – Cast Alloy
Inexpensive non polished die-cast alloy construction. Suitable as a weld on fitting for aluminium boat manufacturers.
|
BLA CODE
|
SHAFT MM
|
HEIGHT MM
|
BASE DIA. MM
|
|---|---|---|---|
| BLA-192142 | 20 | 83 | 55 x 58 |
| Weight | 2 kg |
|---|---|
| Width | 80mm, 100mm, 142mm |
| Pack Size | Single, 20 |
Related products
-
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 300mm Styrene Float
-10%
Anchoring and Mooring, Fenders, Floats, Buoys, Boat HooksBLA Anchor Retriever – 300mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 250 125 144302 300 125 SKU: 144302 -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
Anchor Swivel Connector – 316 Stainless Steel suits 6-8mm Chain
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110330 Length (A) 84mm Width (D) 28mm Suits Chain Size 6mm-8mm Chain End (B) 9mm Anchor End (C) 16mm Pin Diameter Short (E) / Long (F) 7.5mm / 10mm Safe Working Load 625kg Note Use with Loctite thread adhesive. SKU: 110330 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
SAW Fastfender 40 Hanger Clips
SAW Fastfender 40 Hanger ClipsEasy one hand use, these FastFender clips make it easy to attach fenders to rails up to 40mm in diameter.
- Suits 6-14mm rope.
- Resistant to seawater and UV rays.
- Attach and remove boat fenders quickly.
- Suitable for boats, yachts, cruisers and motorboats.
- Available in two colours.
PART NUMBER COLOUR WEIGHT DIMENSIONS SAW-37588BLK Black 122g 160mm x 76mm x 47mm SAW-37588BLU Blue 122g 160mm x 76mm x 47mm SAW-37588LG Light grey 122g 160mm x 76mm x 47mm SKU: SAW-37588BLK, SAW-37588BLU, SAW-37588LG -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
-8%
Anchoring and Mooring, Bollards and CleatsSAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT CHAIN LINK SIZE MOUNTING HOLES SAW-29100 
62mm x 62mm 122mm 84mm 8-10mm Long Link 4 x 7mm holes with 41mm centres SAW-29102 86mm x 86mm 140mm 115mm 10-13mm 4 x 8mm holes with 57mm centres SKU: SAW-29100, SAW-29102