-
×
BLA Anchor Retriever - 300mm Styrene Float
1 × $99.00
Subtotal: $99.00
Anchoring and Mooring, Bollards and Cleats
Price Match
BLA Bull Horn Cleats – Stainless Steel
Price Match
Price range: $3.90 through $5.90
BLA Bull Horn Cleats – Stainless Steel
316 grade stainless steel for durability. An economical basic cleat for tying off lanyards, flag halyards, and similar.
|
BLA CODE
|
LENGTH MM
|
WIDTH MM
|
HEIGHT MM
|
MOUNT SCREWS MM
|
|---|---|---|---|---|
BLA-192250 |
68 | 11 | 12 | 4 r/h |
BLA-192251 |
114 | 14 | 21 | 5 r/h |
| Weight | 0.5 kg |
|---|---|
| Length | 68mm, 114mm |
Related products
-
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
BLA Anchor Retriever – 250mm Styrene Float
BLA Anchor Retriever
Used in conjunction with existing anchoring tackle, the stainless steel ring fits around the anchor rode for deep water anchoring. Motoring forward at 5 to 6 knots lifts the anchor to the float ring. When the anchor chain has fully passed through the ring the anchor is held at the surface. This allows easy retrieval of the anchor rode without the continuous weight of ground tackle.
BLA CODEFLOAT DIA.MMRING DIA. MM144301 
250 125 144302 300 125 SKU: 144301 -
Anchoring and Mooring, Bollards and Cleats
SAW Weld On Alloy Cleat
SAW Weld On Alloy Cleat
Cast Alloy Cleat – Weld On (Medium).
- Marine grade alloy.
- Weld cleat directly to the deck and paint for a desired finish.
- Pilot hole dimples underneath
PART NUMBER PACK SIZE L X W X H BASE SAW-293719 
Single 230mm x 75mm x 65mm 125mm x 75mm SAW-293719-BULK 20 230mm x 75mm x 65mm 125mm x 75mm SKU: SAW-293719, SAW-293719-BULK -
Anchoring and Mooring
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
Anchor Swivel Connector – 316 Stainless Steel suits 10-12mm Chain (110332)
- Pulls easily over bow roller.
- Pins removed using allen wrench.
- 316G Stainless Steel.
- Stamped with rated load.
Part No. 110332 Length (A) 97mm Width (D) 37mm Suits Chain Size 10mm Chain End (B) 14mm Anchor End (C) 23mm Pin Diameter Short (E) / Long (F) 10mm / 12mm Safe Working Load 1250kg Note Use with Loctite thread adhesive. SKU: 110332 -
Anchoring and Mooring, Bollards and Cleats
SAW Standard Duty Cleats – Stainless Steel
SAW Standard Duty Cleats – Stainless Steel
Highly Polished 316G stainless steel finish.
PART NUMBER DESCRIPTION LENGTH WIDTH SAW-29175 
6”(150mm) 316 S/S Cleat 150mm 45mm SAW-29176 8”(200mm) O/Base Stainless Steel Cleat 316 200mm 55mm SAW-29177 316 25cm O/Base Stainless Steel Cleat 250mm 67mm SAW-29179 300mm 316 Stainless Steel Cleat 300mm 87mm SKU: SAW-29175, SAW-29176, SAW-29177, SAW-29179
