BEP Solar Vent Replacement Battery Pack
Marinco Day/Night Solar Vents accessory.
Marinco Day/Night Solar Vents accessory.
| Weight | 0.2 kg |
|---|
New design threads into included deck plate, and is removable from outside without tools. On/off fan switch, LED lights and intake/exhaust switch accessible from inside the cabin for ease of use.
• Circulates fresh air in boat cabin eliminating mold, mildew and musty air
• Moves up to 1,000 cubic feet of air/hour or 24,000 cubic feet of air/day (4″ model)
• Rechargeable 2500mAh battery allows for 24-hour continuous operation
• Whisper quiet fan operation
• No wiring required
• Built-in on/off fan switch, LED lights and intake/exhaust switch
• High capacity NiMh battery operates vent for up to 24 hours without sunlight on a full charge
• Threads into included deck plate and can be removed from outside without tools
• Complete air and green water shut-off from below
• All Day/Night Plus models come complete with white plastic interior trim ring, insect screen, mounting hardware and an easy-to-understand installation manual
• Replaces NICRO 3″ and 4″ snap-in deck plates (fits existing holes once snap-in deck plates are removed) and Day/Night Plus models
|
BLA CODE
|
VENT I.D. MM
|
CUT OUT DIA MM
|
COLOUR FINISH
|
|---|---|---|---|
175392![]() |
75 | 95 | Stainless Steel |
| 175393 | 75 | 95 | White |
| 175394 | 100 | 120 | Stainless Steel |
175395![]() |
100 | 120 | White |
175396 Solar Vent Replacement Battery Pack
Alloy Scupper (36710)
• Ideal for draining the deck of a boat or air pressurizing your caravan, van body or as a vent to allow air flow in.
• The spring loaded door gives you a good seal when closed.
Features:
Part No.: 36710
Description: Alloy Scupper Vent Small
Lid Opening Lx W (mm): 115 x 63
OA Dimensions Lx W (mm): 165 x 112

Heavy duty cast aluminium with mincer with large sprew and removable steel die. Easy mount G-clamp system. Various dies and sausage ends available.
Alloy Scupper (36711)
• Ideal for draining the deck of a boat or air pressurizing your caravan, van body or as a vent to allow air flow in.
• The spring loaded door gives you a good seal when closed.
Features:
Part No.: 36711
Description: Alloy Scupper Vent Large
Lid Opening Lx W (mm): 188 x 95
OA Dimensions Lx W (mm): 240 x 148
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most small outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
| Shape | Rubber Size (mm) | Suitable For |
| Small Round | 90 | Small Outboards |
| Oval | 120 x 90 | Medium to Large |
| Rectangle | 130 x 85 | Medium to Large |

