3M FINESSE-IT Machine Polish
• Designed for use on OEM and fully cured marine paints.
• Removes abrasive sand scratches and other paint surface defects when used with 3M polishing pads.
| Part No. | SAW-5928![]() |
| Size | 946ml |
| Unit Qty | 1 |
$174.80 – $983.35Price range: $174.80 through $983.35
• Designed for use on OEM and fully cured marine paints.
• Removes abrasive sand scratches and other paint surface defects when used with 3M polishing pads.
| Part No. | SAW-5928![]() |
| Size | 946ml |
| Unit Qty | 1 |
| Pack Size | Pack of 1, Pack of 6 |
|---|
• Cleans from stem to stern without stripping wax.
• Cleans grime, algae, dirt and other common marine contaminants.
• Professional strength concentrate makes up to 3.7Ltr per 30ml.
• Important first step in cleaning and refinishing your surfaces.
• Using this product prior to restoring and waxing will greatly improve reconditioning outcomes.
| PART NUMBER | SIZE | DESCRIPTION |
SAW-323101![]() |
473ml | 3M 9034 Perfect-It Boat Wash |
| SAW-323101-6 | 6 x 473ml | 3M 9034 Perfect-It Boat Wash |
SAW-323102![]() |
946ml | 3M 9035 Perfect-It Boat Wash |
| SAW-323102-6 | 6 x 946ml | 3M 9035 Perfect-It Boat Wash |
The Star brite Hull Cleaner powerful formula designed to remove tough stains and ground in dirt, even on porous surfaces. Quickly removes dirt and stains from the waterline as well as scum lines and stains on hulls. Safe for fibreglass, metal and painted surfaces. No scrubbing or rubbing. Does not contain harmfull acids meaning it is safe and easy to use. 946ml bottle.
Instant Hull Cleaner is formulated to begin working on contact to remove unsightly waterline stains. It is also very effective at removing rust stains or leaf stains from fiberglass or painted surfaces. It will not harm the surface being cleaned and is an ideal preparation for polishing the hull.
Shake well. Apply using sponge or sprayer. Use of rubber gloves is recommended. Allow to remain on surface for 2 minutes then rinse with fresh water. Severely stained or dirty surfaces may require second application. For best results, use when temperature is over 50°F. To shine and protect newly cleaned hull, apply any of Star brite’s Marine Polishes.
Star brite Ultimate Vinyl Clean is formulated to blast away the toughest dirt, grime and greasy stains from vinyl, plastic, rubber and leather surfaces. Use on car, RV and boat upholstery, interior/exterior trim, foul weather gear, outdoor cushions or canopies and more.
DIRECTIONS: Spray Ultimate Vinyl Clean onto surface to be cleaned. Using a cloth, soft brush or sponge, rub in a circular, overlapping motion to ensure uniform coverage. Allow Ultimate Vinyl Clean to work into surface for 15-30 seconds before wiping clean or rinsing. Stubborn stains may require a repeat application that is allowed to soak in for about a minute, followed by light scrubbing and rinsing or wiping clean.
Next Steps: For best results, treat cleaned surfaces with Star brite Ultimate Vinyl Guard to preserve, protect and enhance the appearance while providing maximum UV protection.
NOTE: Before treating delicate surfaces (leather, decals, boot stripe tape, painted areas) or where it may drip, test this product on a small inconspicuous area. If adverse reaction occurs, do not use on that surface. Star brite’s liability is limited to the purchase price of this product.
Rain‑X® Original Glass Treatment dramatically improves wet weather driving visibility. Simply apply the treatment to exterior glass and watch the raindrops fly off your windscreen while driving. Rain‑X helps improve visibility by repelling rain, sleet and snow.
In tests conducted by a major university, better visibility improved driving response time up to a full second or more. At highway speeds, that’s almost four car lengths of extra stopping distance!

