Brisbane
Showing 91–105 of 105 results
-
Garmin
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
-13%GarminMinn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
BLA Code: 602996
Wiring Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
CADCO wiring looms are available in 3m (this listing) and 6m lengths and are made with 10mm quality marine grade tinned copper wire, a 50 amp circuit breaker, an Anderson plug kit and all terminals attached. The wiring is protected in a loom tube for neat installation.
Available in popular three and six metre lengths ready for installation these looms are manufactured using quality materials and fittings. Each cable features 10mm marine grade tinned copper wire, quality 50 amp BEP resettable circuit breaker, Anderson plug kit and fixed terminals.
For safety, protection, ease of installation and neatness each loom is supplied encased in black flame retardant corrugated conduit.
Note: For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required (please see related products), allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation.
SKU: Minn Kota 3m Wiring Loom -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V
-40%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V – Advanced i-Pilot 80lbs (24V) 60 inch Shaft Bowmount Electric Motor with Auto Deloy and Trim
- Stow, deploy, trim and operate your motor from anywhere on the boat. Riptide Ulterra features Auto Stow/Deploy and Power Trim, and comes with your choice of i-Pilot or i-Pilot Link. Fish from anywhere. Dominate everywhere.
- Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder.
- Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
- i-Pilot® GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
4 Reasons to Use a Trolling Motor in Saltwater
SKU: 601620 -
Minn Kota, Minn Kota Accessories
Minn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
Minn Kota, Minn Kota AccessoriesMinn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
Minn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
BLA Code: 113676Wiring Harness Terminal Link for 24V Electric Motor Systems.
For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required, allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation. Contact us for further information on your requirement, we are happy to help.
SKU: Terminal Link -
Rod Holders
Viper Pro Series Deluxe Stainless Rod Holder – 30 degree (BM-10001)
Viper Pro Series Deluxe Stainless Rod Holder – 30o Angle (BM-10001)
Heavy duty cast stainless steel rod holder with bottom gimble to support rod. Flush fitting with pre-drilled fastening holes. Heavy duty construction, which are fully welded, and hand polished to a shiny finish. Strong enough for offshore and bay fishing. Complete with cap to prevent water ingress.
SKU: BM-10001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar P66 Transducer
The Airmar P66 Multisensor is a 600W transducer that combines depth and temperature functions in one housing. And it features our 50/200 kHz, dual-frequency, ceramic element. This hydrodynamic housing with its rounded nose reduces the turbulence under the transducer’s acoustic face for clear display images. It is Airmar’s best transom mount for boats up to 8 m (25′) long.
SKU: 000-13977-001, 000-13919-001 -
Lowrance Sonar & Transducers, Lowrance
Xsonic Airmar TM165HW Transducer
Maximize the coverage under your boat and see what you’ve been missing. The Airmar TM165HW is a 600W transducer that features a high-frequency range of 150 to 250 kHz and a super-wide beamwidth, averaging 30°, providing maximum coverage across the frequency band. In addition to improving the performance of Chirp-capable fishfinders, anglers using this new wide-beam transducer will achieve three times the coverage compared to standard high-frequency Chirp-ready transducers.
Wide beamwidth, together with the high-frequency range, provides vast bottom coverage and precise fish detection in the upper-water column that can sometimes go unseen with narrow-beam transducers. Airmar’s new wide-beam format also creates crisper and larger return images on the display.
SKU: 000-15482-001 -
Transducers
Xsonic Airmar TM260 – Traditional/CW Transom Mount Transducer
The Airmar TM260 is a 1kW transducer that comes with a rugged stainless-steel mounting bracket that is easy to install and has a streamlined shape. The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and the wide, 19° beam yields broad coverage under the boat.
SKU: 000-13904-001 -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Ideal for use on boats (clamp to boat side), piers, kayaks etc. Corrosion resistant anodised and polished silver aluminum tube. 360° rotation and with fully adjustable rod angle. Turns through 12 rest position.
Features:
G Clamp mount made from aluminum with 304 stainless steel pressure screw. For boat sides up to 70mm thick.
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series G-Clamp Rod Holder (RHP300) -
Boating Accessories, Rod Holders
XXX Marine – Tournament Series Rail Mount Rod Holder (RHP200)
XXX Marine – Tournament Series G-Clamp Rod Holder (RHP300)
Tournament series rail mount fishing rod holder. Corrosion resistant anodised and polished silver aluminum tube with super tough reinforced engineering grade nylon fittings and 304 stainless steel screws.
Rail mount fits the following diameters:
– 22.2mm (7/8 Inch) round tube
– 25.4mm (1 Inch) round tube
– 31.75mm (1-1/4 Inch) square tube
Rod holder tube length: 280mm
Rod holder tube inner diameter: 41mmSKU: Tournament Series Rail Mount Rod Holder (RHP200)