Best Price
Showing 91–120 of 776 results
-
Boating Accessories, Fillers
Cast Stainless Steel Water Deck Filler With Key (29632)
Cast Stainless Steel Water Deck Filler With Key (29632)
• Flush mount.
• Chain to retain cap.
• Key.
• 3 x 5mm countersunk mounting holes.
• 316G stainless steel.Features:
Part No.: 29632
Description: Stainless Steel Water Deck Filler with Key
Tail Diameter (mm): 50SKU: 29632 -
Boating Accessories, Fillers
Cast Stainless Steel Water Deck Filler With Key (29634)
Cast Stainless Steel Water Deck Filler With Key (29634)
• Flush mount.
• Chain to retain cap.
• Key.
• 3 x 5mm countersunk mounting holes.
• 316G stainless steel.Features:
Part No.: 29634
Description: Stainless Steel Water Deck Filler with Key
Tail Diameter (mm): 38SKU: 29634 -
Boating Accessories
Chrome Plated Angle Mount Hatch Fastener (29703)
Chrome Plated Angle Mount Hatch Fastener (29703)
• 1¼ x 3″Base Size 32mm x 29mm.
• Hook mount dimensions 25mm x 21mm.
• Screws :7 Countersunk.Features:
Part No.: 29703
Description: Chrome Plated Angle Mount Hatch Fastener
Bolt Down Area (mm): 25 x 21
Mounting Holes: 7 x 2.5mmSKU: 29703 -
-
Boating Accessories
Chrome Plated Spring Strut (36366)
Chrome Plated Spring Strut (36366)
• Steel spring sustainer with chrome plating for better durability.
• Suitable for holding small hatches and door open or shut.Features:
Part No:36366
Description:Chrome Plated Spring Strut
LengthCompressed(mm):120
Length Extended (mm):160
Mount Holes: 4x4mmSKU: 36366 -
12V Accessories, Electrical
Cigarette Lighter/Map Light (114252)
Cigarette Lighter/Map Light (114252)
All stainless steel cigarette lighter incorporating a chart light and switch. 12 volt, 20 amp.
Features:
BLA Code: 114252
Bezel mm: 38×53
Overall Length mm: 125
Intrusion mm: 77
Mount Screws mm: 4 r/h
Mount Hole mm: 22SKU: 114252 -
12V Accessories, Electrical, Minn Kota, Minn Kota Accessories
Circuit Breaker 60A – Suitable for Minn Kota Wiring
-18%
12V Accessories, Electrical, Minn Kota, Minn Kota AccessoriesCircuit Breaker 60A – Suitable for Minn Kota Wiring
Circuit Breaker 60A – Suitable for Minn Kota Wiring
Heavy duty, Bakelite body with gold plated terminals. Push button reset. Suitable for 12v installations of electric trolling motors, anchor winches and fridges.
Noe: This listing is for a 60A circuit breaker, not 50A as shown in picture.
SKU: Circuit Breaker 60A -
Seat Pedestals and Swivels, Seating
Columbia Fixed Pedestal (293770)
Columbia Fixed Pedestal (293770)
• Heavy-duty cast aluminium base with 6 x 8mm countersunk mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) anodised finish base.
• 73mm (2 7/8″) satin finish post
• 360° rotation trac-lock swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293770
Description: 305mm Pedestal with Trac-Lock SwivelSKU: 293770 -
Seat Pedestals and Swivels, Seating
Columbia Fixed Pedestal (293772)
Columbia Fixed Pedestal (293772)
• Heavy-duty cast aluminium base with 6 x 8mm countersunk mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) anodised finish base.
• 73mm (2 7/8″) satin finish post
• 360° rotation trac-lock swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293772
Description: 400mm Pedestal with Trac-Lock SwivelSKU: 293772 -
Seat Pedestals and Swivels, Seating
Columbia Fixed Pedestal (293774)
Columbia Fixed Pedestal (293774)
• Heavy-duty cast aluminium base with 6 x 8mm countersunk mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) anodised finish base.
• 73mm (2 7/8″) satin finish post
• 360° rotation trac-lock swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293774
Description: 600mm Pedestal with Trac-Lock SwivelSKU: 293774 -
Seat Pedestals and Swivels, Seating
Columbia Fixed Pedestal (293776)
Columbia Fixed Pedestal (293776)
• Heavy-duty cast aluminium base with 6 x 8mm countersunk mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) anodised finish base.
• 73mm (2 7/8″) satin finish post
• 360° rotation trac-lock swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293776
Description: 760mm Pedestal with Trac-Lock SwivelSKU: 293776 -
Seat Pedestals and Swivels, Seating
Columbia Pedestal Slide/Swivel (293779)
Columbia Pedestal Slide/Swivel (293779)
• Heavy-duty cast aluminium base with 6 x 8mm mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) diameter anodized finish base.
• 73mm (2 7/8″) satin finish post.
• 360° rotation trac-lock slide/swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293779
Description: 510mm Pedestal with Slide/SwivelSKU: 293779 -
Seat Pedestals and Swivels, Seating
Columbia Pedestal Slide/Swivel (293780)
Columbia Pedestal Slide/Swivel (293780)
• Heavy-duty cast aluminium base with 6 x 8mm mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) diameter anodized finish base.
• 73mm (2 7/8″) satin finish post.
• 360° rotation trac-lock slide/swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293780
Description: 460mm Pedestal with Slide/SwivelSKU: 293780 -
Seat Pedestals and Swivels, Seating
Columbia Pedestal Slide/Swivel (293781)
Columbia Pedestal Slide/Swivel (293781)
• Heavy-duty cast aluminium base with 6 x 8mm mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) diameter anodized finish base.
• 73mm (2 7/8″) satin finish post.
• 360° rotation trac-lock slide/swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293781
Description: 600mm Pedestal with Slide/SwivelSKU: 293781 -
Seat Pedestals and Swivels, Seating
Columbia Pedestal Slide/Swivel (293782)
Columbia Pedestal Slide/Swivel (293782)
• Heavy-duty cast aluminium base with 6 x 8mm mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) diameter anodized finish base.
• 73mm (2 7/8″) satin finish post.
• 360° rotation trac-lock slide/swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293782
Description: 305mm Pedestal with Slide/SwivelSKU: 293782 -
Seat Pedestals and Swivels, Seating
Columbia Pedestal Slide/Swivel (293783)
Columbia Pedestal Slide/Swivel (293783)
• Heavy-duty cast aluminium base with 6 x 8mm mounting holes for a solid support in a cabin or cockpit.
• High-strength aluminium powder coated finish friction locking swivel base.
• Moulded nylon cup insert provides a smooth swivel performance.
• 228mm (9″) diameter anodized finish base.
• 73mm (2 7/8″) satin finish post.
• 360° rotation trac-lock slide/swivel with a centrally located locking handle easy to reach with left or right hand.Features:
Part No.: 293783
Description: 760mm Pedestal with Slide/SwivelSKU: 293783 -
Boating Accessories, Canopy Fittings
Cord Button Medium – Black t/s 5mm (25105B)
Cord Button Medium – Black t/s 5mm (25105B)
• The knob is extremely strong and well made with a smooth and rounded matt finish.
• Ideal for use with the Stayput Shock Cord Loop.Features:
Part No: 25105B
Description: Medium Black Cord Button
Diameter (mm): 17
Suits Shock Cord: 5SKU: 25105B -
Battery Chargers
CTEK MXS 10 (MXS10) 12V 10 Amp 8 Step Smart Battery Charger
CTEK MXS 10 (MXS10) 12V 10 Amp 8 Step Smart Battery Charger
The MXS 10 is a charger that offers state of the art technology. It is ideal for professional use and excellent in workshops, caravans, RVs, boats or cars. The MXS 10 is perfect for solving a broad range of battery problems. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge, a special reconditioning function that restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process.
The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20–200Ah and is suitable for maintenance charging up to 300Ah. The charger is IP 65 classified (splash and dust proof), designed to protect vehicle electronics and non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year Australian Manufacturers warranty.
SPECIFICATIONS:
* Volt: 12V
* Rated Voltage AC: 220–240VAC, 50–60Hz
* Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V, SUPPLY: 13.6V
* Min battery voltage: 2.0V
* Charging current: 10A max
* Current, mains: 1.0A rms (at full charging current)
* Back current drain: <1Ah/month
* Ripple: <4%
* Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
* Charger type: 8 step, fully automatic charging cycle
* Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
* Battery capacity: 20–200Ah up to 300Ah for maintenance
* Dimensions: 197 x 93 x 49mm (L x W x H)
* Insulation class: IP65
* Weight: 0.8kg
* Temperature Compensation: Built in charge voltage compensation according to ambient temperature
SKU: MXS10 -
Battery Chargers
CTEK MXS 5.0 (MXS5) 12V 5 Amp 8 Step Smart Battery Charger
CTEK MXS 5.0 (MXS5) 12V 5 Amp 8 Step Smart Battery Charger
The MXS 5.0 is an advanced microprocessor controlled battery charger with automatic temperature compensation built in providing unrivalled performance on lead-acid batteries from 1.2Ah up to 110Ah. The MXS 5.0 solves a broad range of battery problems and is the ideal charger for the user with high demands. Features of the MXS 5.0 include diagnosis of battery condition to establish if it can receive and retain charge, patented automatic desulphation step and a special reconditioning step that will revive and restore deeply discharged and stratified batteries. AGM option is perfect for maximising performance and life of most Stop – Start batteries. The built in temperature compensation ensures ideal charging performance even in the most extreme conditions. Patented Float/Pulse maintenance makes the MXS 5.0 ideal for long – term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display.
The MXS 5.0 is a fully automatic “connect and forget” 12V charger with 8 charging steps and offers selectable SMALL BATTERY, and NORMAL BATTERY programs. The RECOND and AGM options operate individually or together in both SMALL BATTERY and NORMAL BATTERY programs providing great flexibility for the user. Wide charging range on all lead-acid battery types from 1.2Ah up to110Ah with additional maintenance capability to 160Ah. Splash proof and dust proof (IP65). The MXS 5.0 is easy and safe to use, protects vehicle electronics, is spark-free, reverse polarity protected and short circuit proof. The MXS 5.0 features a 5-year Australian Manufacturers warranty.
SPECIFICATIONS:
* Volt: 12V
* Rated Voltage AC: 220–240VAC, 50–60Hz
* Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V
* Min battery voltage: 2.0V
* Charging current: 5A max
* Current, mains: 0.6A rms (at full charging current)
* Back current drain: <1Ah/month
* Ripple: <4%
* Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures
* Charger type: 8 step, fully automatic charging cycle
* Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
* Battery capacity: 1.2–110Ah up to 160Ah for maintenance
* Dimensions: 168 x 65 x 38mm (L x W x H)
* Insulation class: IP65
* Weight: 0.6kg
* Temperature Compensation: Built in charge voltage compensation according to ambient temperature
SKU: MXS5.0 -
Uncategorised
DNA AM/FM Universal Rubber Duck Top Mount 36cm Antenna – White
DNA AM/FM Universal Rubber Duck Top Mount Antenna – White
A single section flexible white rubber mast with adjustable split swivel ball base for easy folding. 180 degree adjustable angle via tough zinc mounting ball with stainless steel screw and nut. Ideal for marine, car, caravan or RV use. Pre-wired with 130cm of cable attached at 90 degree angle for easy installation where mounting area may be limited. Antenna length 360mm (14 inch). Supplied with an allen key to adjust split swivel ball base for the perfect alignment. Suits 25mm hole.
SKU: BBB-SHRAXA102W -
Deck Fittings
Double Hinged Cabin Hook 100mm – Chrome Brass (193020)
Double Hinged Cabin Hook 100mm – Chrome Brass (193020)
The double hinge design significantly reduces rattle over conventional cabin hooks.
Features:
BLA Code: 193020
Base Size mm: 42×26
Length mm: 100
Depth mm: 20
Mount Screws mm: 4 c/sSKU: 193020 -
Drink Holders
Drink Holder Fold Out 75mm Dia. Black – Plastic (194110)
Drink Holder Fold Out 75mm Dia. Black – Plastic (194110)
Mounts onto any flat vertical surface. When not in use the unit folds down to protrude only 24mm. Fold out the retainers to hold glasses up to 75mm in diameter. Moulded in tough U.V. stabilised plastic.
Features:
BLA Code: 194110
Colur: Black
Size Folded mm: 93x98x24
Size Open mm: 93x98x98
Mount Screws mm: 5 c/sSKU: 194110 -
Drink Holders
Drink Holder Fold Out 75mm Dia. White – Plastic (194112)
Drink Holder Fold Out 75mm Dia. White – Plastic (194112)
Mounts onto any flat vertical surface. When not in use the unit folds down to protrude only 24mm. Fold out the retainers to hold glasses up to 75mm in diameter. Moulded in tough U.V. stabilised plastic.
Features:
BLA Code: 194112
Colur: White
Size Folded mm: 93x98x24
Size Open mm: 93x98x98
Mount Screws mm: 5 c/sSKU: 194112 -
Drink Holders
Drink Holder Fold Out Adjustable 70-80mm Dia. Black – Plastic (194114)
Drink Holder Fold Out Adjustable 70-80mm Dia. Black – Plastic (194114)
Coil spring loaded adjustable retainer arms, holds drinks from 70mm to 85mm diameter. Mounts on any flat vertical surface. Folds flat to protrude just 24mm. Moulded from U.V. stabilised plastic.
Features:
BLA Code: 194114
Colur: Black
Size Folded mm: 93x98x24
Size Open mm: 93x98x98
Mount Screws mm: 5 c/sSKU: 194114 -
Drink Holders
Drink Holder Fold Out Adjustable 70-80mm Dia. White – Plastic (194116)
Drink Holder Fold Out Adjustable 70-80mm Dia. White – Plastic (194116)
Coil spring loaded adjustable retainer arms, holds drinks from 70mm to 85mm diameter. Mounts on any flat vertical surface. Folds flat to protrude just 24mm. Moulded from U.V. stabilised plastic.
Features:
BLA Code: 194116
Colur: White
Size Folded mm: 93x98x24
Size Open mm: 93x98x98
Mount Screws mm: 5 c/sSKU: 194116 -
Drink Holders
Drink Holder Recessed 70mm Cut Out – Stainless Steel (194106)
Drink Holder Recessed 70mm Cut Out – Stainless Steel (194106)
Manufactured from pressed stainless steel. Flush mounts into any horizontal surface. 194107 is fitted with a hose tail in the base that accepts 6mm ID hose so spills, spray or rain is drained away.
Features:
BLA Code: 194106
Cut Out Dia.mm: 70
Outside Dia.mm: 88
Inside Dia.mm: 67
Intrusion mm: 43SKU: 194106 -
Drink Holders
Drink Holder Recessed 95mm Cut Out – Stainless Steel (194107)
Drink Holder Recessed 95mm Cut Out – Stainless Steel (194107)
Manufactured from pressed stainless steel. Flush mounts into any horizontal surface. 194107 is fitted with a hose tail in the base that accepts 6mm ID hose so spills, spray or rain is drained away.
Features:
BLA Code: 194107
Cut Out Dia.mm: 95
Outside Dia.mm: 110
Inside Dia.mm: 93
Intrusion mm: 100SKU: 194107 -
Drink Holders
Drink Holder Recessed 95mm Cut Out Black – Polymer (194102)
Drink Holder Recessed 95mm Cut Out Black – Polymer (194102)
Manufactured from super tough poly material which resists sunlight and chemicals. This drink holder has a large diameter lip to provide a neat installation. A hose tail on the bottom accepts 10mm ID hose so any spills, spray or rainwater can be drained away. Holds drinks up to 90mm in diameter and accepts stubbies with coolers. Please note white is shown, but this listing is for a black drink holder.
Features
BLA Code: 194102
Colour: Black
Cut Out Dia.mm: 95
Outside Dia.mm: 110
Inside Dia.mm: 90
Intrusion mm: 88SKU: 194102 -
Drink Holders
Drink Holder Recessed 95mm Cut Out White – Polymer (194103)
Drink Holder Recessed 95mm Cut Out White – Polymer (194103)
Manufactured from super tough poly material which resists sunlight and chemicals. This drink holder has a large diameter lip to provide a neat installation. A hose tail on the bottom accepts 10mm ID hose so any spills, spray or rainwater can be drained away. Holds drinks up to 90mm in diameter and accepts stubbies with coolers.
Features
BLA Code: 194103
Colour: White
Cut Out Dia.mm: 95
Outside Dia.mm: 110
Inside Dia.mm: 90
Intrusion mm: 88SKU: 194103 -
Gunwale Caps and Rubber
Edge Trim Black PVC 0.8mm – Aluminium Core (194501)
Edge Trim Black PVC 0.8mm – Aluminium Core (194501)
Edge trim comprises of a textured PVC vinyl extrusion cover and a segmented non-corrosive aluminium core. This enables the edge trim to be used on almost any radius. Edge trim can be cut with a sharp knife to the desired length and then simply pushed onto the edge that requires trimming. Available in black and white soft-tone finish.
Features:
BLA Code per metre: 194501
Roll Length m: 152
Colour: Black
a mm: 11.4
b mm: 7.1
c mm: 0.8SKU: 194501
