Trailer Parts
Showing 271–300 of 333 results
-
Trailer Lights, Trailer Parts
LED 210 Series Trailer Light Set with Number Plate Lamp / 10m cable
LED 210 Series Trailer Light Set with Number Plate Lamp
Quality approved LED 210 rectangular trailer light set. Mounting suits most common trailers. Sold as a pair.Features high quality long lasting LED lights that are fully encased in a special material to provide outstanding resistance against water ingress.
This fully submersible kit includes one set of fully waterproof ADR ECE Australian Road approved combination LED 210 Series trailer lamps. Each light contains over 80 super bright LED’s to provide outstanding performance. Rated to IP68 and have a 10 year warranty.
LED 210 Series Trailer Light Set with 10m cable
Quality approved LED 210 rectangular trailer light set. Mounting suits most common trailers. Sold as a pair.Features high quality long lasting LED lights that are fully encased in a special material to provide outstanding resistance against water ingress.
This fully submersible kit includes one set of fully waterproof ADR ECE Australian Road approved combination LED 210 Series trailer lamps. Each lamp contains over 80 super bright LED’s to provide outstanding performance and comes pre-wired with 10 metres of heavy duty tinned four core wire. Supplied complete with stainless steel mounting hardware and suits standard mounting hole patternsRated to IP68 and have a 10 year warranty.
Features / Specifications
- Lens Free Design
- Fully Submersible
- Inbuilt Licence Plate Lamp
- ECE Australian Road Approved
- IP68 Rated
- 12 Volt Only
- 10 Year Warranty
- 210mm x 96mm x 24mm
Fitting Instructions
Surface mount onto a flat surface horizontally with stainless steel bolts provided in assembly and run cable through a 12mm hole. Please refer to ADR 13/00.
Technical Drawings
SKU: BBB-LED210BARLP2, BBB-LED210BARLP210 -
Trailer Parts, Trailer Lights
LED 99 Series Trailer Lamp Set with Number Plate Lamp
LED 99 Series Trailer Lamp Set with Number Plate Lamp
Quality approved LED square trailer light set. Mounting suits most common trailers. Sold as a pair.
Features / Specifications
- Budget Range Trailer Lamps
- ECE Road Approved
- In-built Licence Plate Lamp
- Small Harness Compatible
- 10 Metre Cable Option Available
- IP67 100% Waterproof
- Voltage Range 12 Volt or 12-24 Volt
- 107mm x 107mm x 23mm
Fitting Instructions
Surface mount onto flat surface vertically with Indicator at the top using bolts in the back of the lamp, run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Technical Drawings
SKU: BBB-LED99ARL2 -
Trailer Parts, Trailer Lights
LED Side Marker Lights – LED 58 Series Marker Lamps
LED Side Marker Lights – LED 58 Series Marker Lamps
LED Autolamps LED Amber side marker clearance lamp. Utilises bright LED and efficient lens for maximum performance at a budget price. Slimline desigh, only 19mm deep. Sold each.
LED Autolamps LED Red/Amber side marker clearance lamp. Utilises bright LED and efficient lens for maximum performance at a budget price. Slimline desigh, only 19mm deep. Sold each.
Features / Specifications
- Budget New Lens Design
- Low profile
- Clip-in replaceable lens
- ADR approved
- IP67 100% Waterproof
- Voltage Range 12-24 Volt
- 5 Year Warranty
- 58mm x 35mm x 21mm
Fitting Instructions
Surface mount bracket, run wires through back and clip lens into place. Please refer to ADR 13/00 for mounting instructions.
Technical Drawings
SKU: BBB-LED58AM, BBB-LED58ARM -
Trailer Parts, Brake Kits and Parts
LoadForce 10 inch Disc Hub
LoadForce 10 inch Disc Hub
LoadForce dacromet dacromet trailer disc brake hub 10 inch x 5/8 inch HT 5 stud Supplied with quality Japanese slimline (Ford) bearings and Australian made hub marine seal.
HT Holden stud measurements:
- Stud diameter: 7/16 inches.
- PCD (Pitch circle diameter): 108mm (4.251 inches).
- Stud distance: 63mm.
- Bearing: Slimline / Ford: Inner LM68149/10 ; Outer LM12749/10.
All disc hub assemblies come boxed complete with studs, nuts, bearings, marine seal and dust cap.
Load Force Disc Rotor range for Trailers and Caravans – Product in Focus
SKU: DH58HTFG-10 -
Trailer Parts, Brake Kits and Parts
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225
LoadForce DBC-225-DAC Trailer Brake Caliper Replaces Kodiak 225
LoadForce DBC-225-DAC replacement for Kodiak 225 dacromet cast iron hydraulic trailer brake caliper. Found on some imported American designed trailers this caliper fits on 19mm (3/4 inch) up to 24mm disc. Comes complete with brake pads, stainless slide pins, brass union and bleed screws.
When connecting your new trailer brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper are a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This brake caliper comes with a set of disc pads.
SKU: DBC-225-DAC -
Trailer Parts, Brake Kits and Parts
LoadForce Disc Brake Pad Set for Deemaxx Calipers
LoadForce Disc Brake Pad Set for Deemaxx Calipers
LoadForce disc brake pad set for Deemaxx calipers. Set of 4 brake pads.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: DPDMX -
Trailer Parts, Brake Kits and Parts
LoadForce disc brake pad set for TA100 and TA200 – DPT
LoadForce disc brake pad set for TA100 and TA200 – DPT
LoadForce™ disc brake pad set. Comes as a set of 4. These brake pads suit the LoadForce TA100 mechanical and TA200 hydraulic brake caliper models. They will also suit Trigg A100 mechanical, Trigg A200 hydrualic, ARK mechanical, Al-Ko mechanical caliper and Meher brake calipers.
The LoadForce trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: DPT -
Trailer Parts, Brake Kits and Parts
LoadForce Disc Brake Pad Set for TA300 – DPTA300
LoadForce Disc Brake Pad Set for TA300 – DPTA300
The trailer disc brake pad set of 4 fits LoadForce TA300 & TA400, caliper models. It also fits Al-Ko, Meher, Trojan AU, and Trojan MK7 brake calipers.
The trailer brake pad and trailer brake shoe range is a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: DPTA300 -
-
Trailer Parts, Brake Kits and Parts
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton
LoadForce TA100 Mechanical Brake Caliper – Galvanised Cast Iton
LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA100 Mechanical Trailer Brake Caliper – Product in Focus
SKU: TA100 -
Trailer Parts, Brake Kits and Parts
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
Trailer Parts, Brake Kits and PartsLoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
LoadForce TA200 Hydraulic Trailer Brake caliper Replacement for Trigg A200
LoadForce TA200 hydraulic trailer brake caliper galvanized cast iron. Fits on 1/2 inch up to 5/8 inch rotor width.
Caliper includes brake pads and stainless steel slide tubes. This trailer brake caliper directly replaces the Trigg A200 caliper.
The TA200 has been upgraded with a conventional square section piston seal over the O-ring type used by most others on the market.
2 x A100BOLT caliper bolts required for mounting. HU4 union and CW1 copper washer are required for the installation of the brake lines to the TA200 brake caliper.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy-duty asbestos-free friction material formulation used in the LoadForce product is capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
SKU: TA200 -
Trailer Parts, Brake Kits and Parts
LoadForce TA300 Hydraulic Disc Brake Caliper
LoadForce TA300 Hydraulic Disc Brake Caliper
LoadForce TA300 hydraulic galvanised cast iron brake calliper with a stainless steel piston. An improved design that directly replaces the Trojan AU caliper which is fitted with phenolic plastic pistons. Phenolic pistons are renowned for swelling and eventually seizing in the calliper. The Loadforce TA300 trailer brake calliper eliminates this fault by using a billet stainless steel piston.
The TA300 trailer brake caliper fits 1/2 inch up to 5/8 inch rotor thickness and is also designed to be a replacement for the Trigg A200 caliper.
1 x TA300BOLTKIT required for mounting. A HU4 union and CW1 copper washer are also required for the installation of the brake line to the caliper.
Before connecting your new brake caliper to hydraulic brake lines you must flush out the old brake fluid from the actuator (master cylinder or electric/hydraulic pump) and brake lines before connecting this new brake caliper.
Once flushed, then connect brake lines, refresh the system with new brake fluid and bleed air from the brake system.
Compatible with Dot 3 and Dot 4 brake fluid, however we do recommend using Dot 4 Brake fluid as it has higher moisture resistance. Failure to flush the system could void warranty.
The brake pads used in this caliper a premium product specifically designed for trailer applications. Large trailers carrying heavy loads can generate very high brake temperatures. The heavy duty asbestos free friction material formulation used in the LoadForce product are capable of handling high temperatures for long time periods and minimizes the chances of brake fade.
This trailer brake caliper comes with brake pads.
Load Force TA300 Hydraulic Trailer Brake Caliper – Product in Focus
SKU: TA300 -
Trailer Parts, Trailer Lights
NARVA Pre-wired LED Trailer Light Set
NARVA Pre-wired LED Trailer Light Set – Model 37 12V LED Plug and Play Trailer Lamp Kit (Submersible) For Boat Trailers
Narva complete plug and play solution for boat trailers making installation easier and quicker.
Perfect for DIY installation. Narva’s model 37 trailer lamp has been designed and engineered for use on boat trailers where regular submersion is common. The lamps are protected from water ingress with a two-stage system that incorporates ultrasonic welding and a two-part epoxy glue.
The kit includes 1x 12V L.E.D slimline rear stop/tail, direction indicator lamp with in-built retro reflector, 0.5m lead and waterproof connector (93730); 1x 12V L.E.D slimline rear stop/tail, direction indicator with licence plate lamp and in-built retro reflector, 0.5m lead and waterproof connector (93734); 2x 12V L.E.D slimline side marker lamp (red/amber) with 0.5m lead and waterproof connector (91332); 1x 7 pin flat trailer plug with 1m lead and waterproof connector (82142); 1x 7 pin large round trailer plug with 1m lead and waterproof connector (82183); 1x ‘Plug and Play’ boat trailer harness with waterproof connectors.
SKU: BBB-BRO93750BL2 -
Trailer Parts
Narva Trailer Adaptor – 7 pin round to 7 pin flat
Narva Trailer Adaptor – 7 pin round to 7 pin flat
Quality trailer light connection plug 7 pin large round male 7 pin flat female that complies with Australian ADR’s. Wide Range available in roun, large round and flat configurations.
SKU: BBB-BRO82235BL -
Trailer Parts
OCEANSOUTH Guide Poles i-BEAMS
OCEANSOUTH Guide Poles i-BEAMS
Oceansouth Trailer Guide Poles are expertly crafted using high-quality materials to ensure durability, reliability, and long-lasting performance. They are specifically engineered to provide optimal visibility and guidance while maneuvering your boat onto the trailer. Say goodbye to frustrating and time-consuming attempts to align your boat in the right position. With Oceansouth’s Trailer Guide Poles, you’ll experience hassle-free and precise boat loading every single time.
- 40mm x 40mm Fully Galvanized Square Tube
- Ø63mm PVC White Protective Tube. Ø3.9mm Wall Thickness
- Galvanized parts & components
- Can be easily assembled
Equipped with bright, highly visible writing, these poles offer enhanced visibility, even in low-light conditions or adverse weather. The white poles serve as a visual aid, assisting you in aligning your boat’s bow perfectly with the centerline of the trailer, ensuring smooth and accurate loading.
Installation is a breeze, thanks to the user-friendly design of our Trailer Guide Poles. With the included mounting hardware and simple step-by-step instructions, you can easily attach them to your trailer. They are designed to fit all trailer frames (rectangle or I-Beam) and come in 4 sizes to ensure a desired height to suit your specific boat and trailer combination.
Oceansouth’s Trailer Guide Poles are not only functional but also built to withstand the harshest marine environments. The corrosion-resistant construction ensures their longevity, even in saltwater conditions, so you can enjoy worry-free boating adventures for years to come.
Whether you’re a seasoned boater or a novice, Oceansouth’s Trailer Guide Poles are the perfect accessory to simplify your boating experience. They provide peace of mind, save you time and effort and help protect your investment by ensuring safe and secure boat loading.
Please note: when trailering your boat on public roads, please ensure the Trailer Guide Poles are not extended out past the width of the trailer’s wheel arch and/or the width of the boat (whichever is widest). Also, ensure that you when driving on the road The Trailer Guide Pole kit includes both left and right-hand side trailer guide poles and mounting assembly.
SKU: MA 310-1A, MA 310-2A, MA 310-3A, MA 310-4A -
Trailer Parts
OCEANSOUTH Guide Poles Rectangular BEAMS
OCEANSOUTH Guide Poles Rectangular BEAMS
Oceansouth Trailer Guide Poles are expertly crafted using high-quality materials to ensure durability, reliability, and long-lasting performance. They are specifically engineered to provide optimal visibility and guidance while maneuvering your boat onto the trailer. Say goodbye to frustrating and time-consuming attempts to align your boat in the right position. With Oceansouth’s Trailer Guide Poles, you’ll experience hassle-free and precise boat loading every single time.
- 40mm x 40mm Fully Galvanized Square Tube
- Ø63mm PVC White Protective Tube. Ø3.9mm Wall Thickness
- Galvanized parts & components
- Can be easily assembled
Equipped with bright, highly visible writing, these poles offer enhanced visibility, even in low-light conditions or adverse weather. The white poles serve as a visual aid, assisting you in aligning your boat’s bow perfectly with the centerline of the trailer, ensuring smooth and accurate loading.
Installation is a breeze, thanks to the user-friendly design of our Trailer Guide Poles. With the included mounting hardware and simple step-by-step instructions, you can easily attach them to your trailer. They are designed to fit all trailer frames (rectangle or I-Beam) and come in 4 sizes to ensure a desired height to suit your specific boat and trailer combination.
Oceansouth’s Trailer Guide Poles are not only functional but also built to withstand the harshest marine environments. The corrosion-resistant construction ensures their longevity, even in saltwater conditions, so you can enjoy worry-free boating adventures for years to come.
Whether you’re a seasoned boater or a novice, Oceansouth’s Trailer Guide Poles are the perfect accessory to simplify your boating experience. They provide peace of mind, save you time and effort and help protect your investment by ensuring safe and secure boat loading.
Please note: when trailering your boat on public roads, please ensure the Trailer Guide Poles are not extended out past the width of the trailer’s wheel arch and/or the width of the boat (whichever is widest). Also, ensure that you when driving on the road The Trailer Guide Pole kit includes both left and right-hand side trailer guide poles and mounting assembly.
SKU: MA 310-1B, MA 310-2B, MA 310-3B, MA 310-4B -