Pumps and Plumbing
Showing 31–60 of 110 results
-
Pumps and Plumbing, Water Pumps
JABSCO HotShot 6HD 12V 70psi Deckwash Pump Kit
JABSCO HotShot 6HD 12V 70psi Deckwash Pump Kit
- Up to 22.7 litre (6.0 GPM) per minute fl ow rate
- 70 PSI ultra high pressure cut out
- The motor is ignition protected & thermal overload protected
- Self priming to 2.1 metres (7 ft)
- Diaphragm design can run dry for extended periods
- Spray resistant motor coating IPX6 – NOT waterproof
- Sealed pressure switch extends pump life
- Includes pump, plug-in inlet fi lter, large deluxe hose trigger nozzle, standard Australian garden hose connector, USA GHT connector to suit HoseCoil hoses, 2 x 20mm Large Dia. straight hose barb ports & 1 x snap-in USA GHT port.
How to Replace a Dampener in a Jabsco Diaphragm Pump
SKU: J0020-252 -
Pumps and Plumbing
JABSCO Par Max 4HD 12V Fresh Water Pump
JABSCO Par Max 4HD 12V Fresh Water Pump
Features and Benefits –
- Fully automatic operation with built-in pressure switch
- Pressure switch 40PSI or 60PSI cut off
- Up to 15.2 litres 4 US gallons per minute fl ow
- Serves up to 4 x 12mm (1/2) outlets on board simultaneously
- Modern 4 chamber design gives smooth fl ow and quiet operation
- Built-in internal by-pass lowers water pulsation
- Self primes to 2.4 metres (8 feet)
- Can be installed vertically or horizontally
- Can be run dry for short periods without damage
- Powerful heavy duty ignition protected motor with thermal protection TCO
- Vibration dampening base plate & feet for quiet effi cient operation
- Available in both 12 volt & 24 volt in both 40PSI & 60PSI versions
How to Replace a Dampener in a Jabsco Diaphragm Pump
SKU: J0020-210 -
Pumps and Plumbing
JABSCO Par Max Fresh Water Pressure Pump
JABSCO Par Max Fresh Water Pressure Pump
- 11.3 litres per minute 40 PSI
- Quiet operation
- Can be run dry for periods
- Self primes to 2.4 Mtrs (8 ft)
- Built-in bypass lowers pulsatio
- No need for an accumulator
How to Replace a Dampener in a Jabsco Diaphragm Pump
SKU: J0020-202 -
Pumps and Plumbing
JABSCO Par Max HD4 60psi 12V
JABSCO Par Max HD4 60psi 12V
These Heavy Duty (HD) Par-Max 4 freshwater pressure pumps offer robust construction and high performance. These new modern design pumps have a 4 chamber quad design pump head and offer pressure up to 60PSI. These heavy Duty (HD) models include a heavy duty wider diameter motor with a powder coated shell, cast aluminium end bells and lower housing – to improve pressure capability and offer longer life and exceptional performance. The ideal robust heavy duty pump for providing freshwater automatically to up to 4 outlets on pleasure craft up to approx the 13 metre (40 Ft) range. Includes a 40 mesh plug-in inlet strainer in the box with the pump. HD Quad 4 chamber automatic pressure pump gives fl ow up to 4 US Gallons per minute (15.2 litres per minute) and pressure up to 60 PSI. Serves up to 4 x 12mm outlets including galley, shower and additional faucet. The Par-Max 4.0 HD gives very smooth water flow even at low demand due to its built-in pulsation dampening by-pass valve which controls unwanted cycling and reduces noise. Inlet filter, corrosion resistant motor, soft rubber vibration dampening mounts and quick connect plug-in hose ports included – 2 x 12mm barbed for hose. 12 volt in 60 PSI cut-out pressure.
Features and Benefits –
- Fully automatic operation with built-in pressure switch
- Pressure switch 60PSI cut off
- Up to 15.2 litres 4 US gallons per minute flow
- Serves up to 4 x 12mm (1/2) outlets on board simultaneously
- Modern 4 chamber design gives smooth flow and quiet operation
- Built-in internal by-pass lowers water pulsation
- Self primes to 2.4 metres (8 feet)
- Can be installed vertically or horizontally
- Can be run dry for short periods without damage
- Powerful heavy duty ignition protected motor with thermal protection TCO
- Vibration dampening base plate & feet for quiet effi cient operation
- 12 volt
How to Replace a Dampener in a Jabsco Diaphragm Pump
SKU: J0020-262 -
Pumps and Plumbing, Water Pumps
Johnson Pump 3.5/5.2GPM 70PSI Wash Down Pump
Johnson Pump 3.5/5.2GPM 70PSI Wash Down Pump
The quiet and pulsation-free Aqua Jet five-chamber diaphragm wash down pumps provide the perfect wash down solution for cleaning recreational equipment. With a higher pressure of up to 5 bar, clean-up is faster and easier than ever before.
- Limited 3 Year Warranty
- Up to 5 bar (73 psi) pressure
- Whisper quiet operation
- Five-chamber construction
- Smooth flowing
- Self-priming
- Integrated pressure switch turns pump on and off automatically when the spray nozzle is opened and closed
- Dry running without damage
- Low power consumption
- Easy, low cost maintenance
- PUMProtector inlet strainer and trigger nozzle included as standard
- Quick disconnect fitting
- Hose connections for ½” hose. Both BSP and NPT connections included
- Long service life
THEORY OF OPERATION
As the pump runs, pressure is increased until it reaches the pre-defined pressure level (2.8 bar – 41 psi for WD 2.9, 5 bar – 70 psi for WD 3.5 & 5.2). When the pre-defined pressure level is reached the integrated pressure switch automatically shuts the pump off.
The pump is equipped with positively checking outlet valves which ensure that the pressure is maintained after the pump shuts off.
When water is demanded the pressure decreases. After a moderate drop in pressure, the integrated pressure switch automatically turns the pump back on.
Due to their durable construction and thoughtful design, the WD-pumps will provide many years of service.
Material Specifications
Motor Aqua Jet WD 3.5 – 120 W, 12/24V DC Aqua Jet WD 5.2 – 185 W, 12/24V DC (with built-in thermal protection) Body PA/PPA Valves Nitrile Diaphragm Santoprene Technical Data
Part No. Description Capacity Pressure Cut Off Fuse Size Connection 10-13399-03 Aqua Jet WD 3.5 12V 13 l/min – 3.5 GPM 5 bar – 70 psi 20 A ⅜” BSP x ½” barb 10-13407-07 Aqua Jet WD 5.2 12V 20 l/min – 5.2 GPM 5 bar – 70 psi 20 A ⅜” BSP x ½” barb Dimensions
Part No. Length Width Height Weight 10-13399-03 236.5 mm – 9.31″ 210 mm – 8.25″ 116 mm – 4.58″ 2 kg – 4.5 lbs 10-13407-07 240 mm – 9.46″ 214 mm – 8.42″ 110 mm – 4.33″ 2 kg – 4.5 lbs SKU: BBB-SPX10-13399-03, BBB-SPX10-13407-07 -
Pumps and Plumbing, Livewell Pumps
Johnson Pump 500GPH Livewell Aerator In-Line Pump – 90 Degree
Johnson Pump 500GPH Livewell Aerator In-Line Pump – 90 Degree
The 500GPH cartridge aerator pumps offer the ease of convenience and years of reliable service. Improved design with easy-to-install Dura-Port discharge port. Smaller profiles to fit in more confined spaces. Easy to change motor cartridge.
- Limited 3 Year Warranty
- Capacities 500GPH
- Available in two different intake configurations: straight or 90°
- Compact, easily replaceable all-in-one motor/impeller unit
- No tools needed for maintenance
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Improved design with easy-to-install Dura-Port discharge ports (straight and a 90° smooth elbow included) eliminate stress cracking caused by over-tightened hose clamps
- Meets the international standard, ISO 8849 marine
Suits small confined bilge and tank areas.
Easy to change motor cartridge.
12 volt.
Aerator Pump Features – Johnson Pump Marine
SKU: BBB-SPX3850R -
Pumps and Plumbing, Livewell Pumps
Johnson Pump 500GPH Livewell Aerator In-Line Pump – Straight
Johnson Pump 500GPH Livewell Aerator In-Line Pump – Straight
Johnson Pump cartridge aerator pumps offer the ease of convenience and years of reliable service. Improved design with easy-to-install Dura-Port discharge port. Smaller profiles to fit in more confined spaces. Easy to change motor cartridge.
- Limited 3 Year Warranty
- Capacities 500GPH
- Available in two different intake configurations: straight or 90°
- Compact, easily replaceable all-in-one motor/impeller unit
- No tools needed for maintenance
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Improved design with easy-to-install Dura-Port discharge ports (straight and a 90° smooth elbow included) eliminate stress cracking caused by over-tightened hose clamps
- Meets the international standard, ISO 8849 marine
Suits small confined bilge and tank areas.
Easy to change motor cartridge.
12 volt.
Aerator Pump Features – Johnson Pump Marine
SKU: BBB-SPX2850R -
Pumps and Plumbing, Bilge Pumps
Johnson Pump 500GPH/750GPH/1000GPH/1150GPH Bilge Pump
Johnson Pump 500GPH/750GPH/1000GPH/1150GPH Bilge Pump
Popular Johnson 12 volt bilge pump. Water cooled motor, snap-off base for easy cleaning.
The compact Johnson 500gph (30lpm) submersible cartridge bilge pump are supplied with both straight and smooth 3/4″ elbow discharge ports that eliminate stress cracking caused by over-tightened hose clamps. Energy efficient, compact, all-in-one water-cooled motor/impeller units requires no tools for maintenance and boast long service intervals. Meets the international standard, ISO 8849 marine. Can be combined with an automatic float switch for automatic operation.
Our Cartridge Pumps incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties.
- Limited 3 Year Warranty
- Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH
- Extremely energy efficient
- Water-cooled motor for long service intervals
- Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft
- No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
- 500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
- 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve
- Meets the international standard, ISO 8849 marine
- Cartridge Pumps can be combined with either an automatic switch AS888, an electronic float switch or the Ultima Switch for automatic operation
Part No. Description Capacity 3 ft (0.9 m) head (13.6V/27.2V) Capacity straight (13.6V/27.2V) Voltage Amperage Fuse Size Connection Wire size 32-1450-01 Cartridge Bilge Pump 500 GPH 12V 33 l/min – 525 GPH 40 l/min – 630 GPH 12 V 2.5 A 5 A ¾” 16 GA (1.3mm2) 32-1550-01 Cartridge Bilge Pump 750 GPH 12V 44 l/min – 700 GPH 50 l/min – 800 GPH 12 V 3 A 5 A 32-1650-01 Cartridge Bilge Pump 1000 GPH 12V 50 l/min – 800 GPH 63 l/min – 1000 GPH 12 V 3.2 A 5 A 32-1750-01* 60 l/min – 952 GPH 73 l/min – 1150 GPH 12 V 3 A 5 A 1⅛” * Does not include Dura-Port connection DIMENSIONS
Height (A) 4.41″ (112 mm) Width (B) 3.46″ (88 mm) Width (C) 3.15″ (80 mm) Weight 0.27 kg – 9.6 oz. 500 GPH – 1000 GPH 0.32 kg – 10.4 oz. 1250 GPH Instruction Manual
Cartridge Bilge Pump Overview – Johnson Pump Marine
SKU: BBB-SPX32-1450-01, BBB-SPX32-1550-01, BBB-SPX32-1650-01, BBB-SPX32-1750-01 -
Pumps and Plumbing, Bilge Pumps
Johnson Pump 600/800/1000/1200GPH Automatic Bilge Pump
Johnson Pump 600/800/1000/1200GPH Automatic Bilge Pump
Popular Johnson 12 volt bilge pump with compact integrated float switch Water cooled motor, snap-off base for easy cleaning.
Sleek, reliable and compact unit with integrated patented Ultima “field effect” sensing technology switch, ready to install and run for years and years of unerring service.
- Limited 3 Year Warranty
- Compact, all-in-one unit
- Integrated Ultima Switch technology in the pump body for trouble-free, automatic operation
- Available in capacities 600 GPH, 800 GPH, 1000 GPH and 1250 GPH
- UltimaBilge 600 GPH, 800 GPH and1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
- These pumps include both a straight and a 90° smooth ¾” elbow Dura-Port
- UltimaBilge 1250 GPH includes threaded 1 1/4″ & 1 1/8″ discharge port
- All version are delivered with a removable check valve
- Voltage 12 V DC
- No Mercury
- Removable clip on basket design
- Removable impeller cover allows for easy clean out
- No tools needed for maintenance
- Extremely energy efficient
- Water-cooled motor for long service intervals
- The Ultima Bilge pumps are 3-wire device and can be run in auto or manual override mode via the bilge control panel
- Meets the international standard, ISO 8849 marine
Part No. Description Capacity 3 ft (0.9 m) head (13.6V) Capacity straight (13.6V) Voltage Amperage Fuse Size Connection 32-47258-008 Ultima Bilge 600 GPH 12V with integrated switch 32 L/min – 500 GPH 38 L/min – 600 GPH 12 V 2.5 A 5 A ¾” 32-47259-008 Ultima Bilge 800 GPH 12V with integrated switch 38 L/min – 600 GPH 51 L/min – 800 GPH 3 A 5 A ¾” 32-47260-008 Ultima Bilge 1000 GPH 12V with integrated switch 44 L/min – 700 GPH 64 L/min – 1000 GPH 3.2 A 5 A ¾” 32-47261-005* Ultima Bilge 1250 GPH 12 V with integrated switch 51 L/min – 800 GPH 79 L/min – 1250 GPH 3 A 5 A 1⅛” and1¼” *) Does not include 1250 GPH Dura-Port connection Note: Models sold in the US are white plastic; models sold in the rest of the world are manufactured in red plastic.
DIMENSIONS
600, 800 & 1000 GPH
Length 142 mm – 6″ Width 82 mm – 3.2″ Height 105 mm – 4.1″ Weight 0.66 kg – 1.5 lb 1250 GPH
Length 142 mm – 6″ Width 82 mm – 3.2″ Height 117 mm – 4.6″ Weight 0.66 kg – 1.5 lb Instruction Manual
SKU: BBB-SPX32-47258, BBB-SPX32-47259, BBB-SPX32-47260, BBB-SPX32-47261 -
Pumps and Plumbing, Water Pumps
Johnson Pump Aquajet 2.9/3.5GPM 41PSI Water Pressure Pump
Johnson Pump Aquajet 2.9/3.5GPM 41PSI Water Pressure Pump
The five chamber Aqua Jet Water Pressure Pump “WPS” series provides a reliable heart for small boat and recreational vehicle water pressure systems. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sound levels in relation to water flow are placed at a premium – such as in shower and galley applications.
Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics, even at low speeds. Integrated pressure switch turns pump on and off automatically when tap is opened and closed.
- Limited 3 Year Warranty
- Whisper quiet operation
- Five-chamber construction
- Self-priming
- Easy, low cost maintenance
- Quick-connect hose or threaded connectors available
- Pressure switch standard
- Long service life
- Operates in fresh or sea water
Part No. Description Capacity Pressure Cut Off* Voltage Fuse Size Connection** 10-13405-03 Aqua Jet WPS 2.9 12V 11 L/min – 2.9 GPM 2.8 bar, 41 psi 12 V 10 A ⅜” BSP / hose ½”, ½” BSP / hose ¾” 10-13395-03 Aqua Jet WPS 3.5 12V 13 L/min – 3.5 GPM 2.8 bar, 41 psi 12 V 10 A ⅜” BSP / hose ½”, ½” BSP / hose ¾” 10-13406-07 Aqua Jet WPS 5.2 12V 20 L/min – 5.2 GPM 2.8 bar, 41 psi 12 V 15 A ⅜” BSP / hose ½”, ½” BSP / hose ¾” * Cut off pressure 2.1 bar/30 psi and 1.4 bar/20 psi available on request Dimensions
Part No. Length Width Height Weight 10-13405-03 204 mm 8.02″
197 mm 7.76″
110 mm 4.33″
1.6 kg 3.5 lbs
10-13395-03 236.5 mm
9.31″210 mm
8.25″116 mm
4.575″2kg
4.5 lbs10-13406-07 240 mm
9.46″214 mm
8.42″110 mm
4.33″2kg
4.5 lbsKey Applications – Typical Water Pressure System
1. Water tank 7. Accumulator tank 2. PUMProtector inlet strainer 8. Water heater 3. Aqua Jet Water Pressure Pump 9. ON / OFF bipolar switch 4. Battery 10. Motor 5. Fuse 11. Check valve 6. Switch 12. Shut-off valve For minimizing the number of starts and stops – and thereby reducing wear and tear on the pump when only small amounts of water are drawn off – it is recommended to install the WPS pumps together with and accumulator tank.
Always use a PUMProtector Inlet Strainer before the pump intake.
Material Specifications
Pump body: PP/PPA (Aquajet 2.4, 2.9, 3.5) – PP (Aquajet 4.0, 5.2) Valve housing: Polypropylene Valves: EPDM Diaphragm: Santoprene SKU: BBB-SPX10-13405-03, BBB-SPX10-13395-03, BBB-SPX10-13406-07 -
Bilge Pumps, Pumps and Plumbing
Johnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Bilge Pumps, Pumps and PlumbingJohnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Johnson Pump Bilge Mate – 450GPH 3/4in Outlet 12V Bilge Pump (Part No.: 32-1015-01)
Popular Johnson Bilge Mate 12 volt Bilge Pump. Water cooled motor, snap-off base for easy cleaning.
The compact 450gph (30lpm) submersible cartridge bilge pump with 3/4″ straight discharge port. Energy efficient (max. 2.5 A), compact, all-in-one water-cooled motor/impeller units requires no tools for maintenance and boast long service intervals
LINKS:
Johnson Pump Bilge Mate Bilge Pump Instruction Manual (428kb – click to open in new window)SKU: 32-1015-01 -
Pumps and Plumbing, Water Pumps
Johnson Pump Deck Wash Kit with 7.5m Hose & Gun
Johnson Pump Deck Wash Kit with 7.5m Hose & Gun
Discover the different wash down kits from SPX FLOW Johnson Pump. The 5.2 GPM PUMP KIT includes a high capacity Aqua Jet Wash Down Pump 5.2, hose strainer or PUMProtector inlet strainer, spray nozzle and the relevant connections – all in one package.
20 L/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, 7.5 meters (25’) of coiled wash down hose and a 2-way panel switch – all in one package.
- Whisper quiet operation
- Five-chamber construction
- Smooth flowing
- Self-priming
- Easy, low cost maintenance
- Quick-connect hose
- Integrated pressure switch
- Long service life
Part number Part No. USA Description Connection Kit Includes 32-64534 64534 Aqua Jet 5.2 Wash Down Pump Kit, 12V ½” NPT / hose ¾”. ¾” GHT, Hose ¾” GHT Bulkhead fitting
– Inlet ¾” hose, outlet ¾” GHTAqua Jet WD 5.2, inlet strainer, spray pistol, hose, bulkhead fitting, hose connectors, barb port fittings, panel switch SKU: BBB-SPX32-64534 -
Pumps and Plumbing, Livewell Pumps
Livewell Tank Aerators
Livewell Tank Aerators
• Fully adjustable aerator head has been especially designed for the user to customise water flow to suit their live bait tank.
• Easy installation.
• Suits 3/4 inch I.D. Hose.Part No. SAW-23036 SAW-23037 Hose I.D. 3/4 inch 3/4 inch Cut Out Dia. 25mm Dia. 25mm Colour White Black SKU: SAW-23036, SAW-23037 -
Pumps and Plumbing
Perfect Image Battery Operated Liquid Transfer Pump
Perfect Image Battery Operated Liquid Transfer Pump
Handy battery opperated vertical pump designed for transfering liquids such as diesel, water, oil and other non-corrosive liquids. Reliable battery opperated impeller pump will transfer up to 8 litres per minute, viscosity dependant. 350mm suction pipe provides ample depth for most containers while the 600mm flxible tube allows for easy transfer. Requires 2 x D size batteries (not included).
SKU: BBB-PILTPUMP -
Pumps and Plumbing, Livewell Pumps
PVC Ball Valves
PVC Ball Valves
• Compact style noncorrosive PVC ball valve with large handle.
• Full bore parallel BSP Female threaded ports.Part No. SAW-45180 SAW-45181 SAW-45182 SAW-45183 SAW-45180 SAW-45180 Thread ½ inch BSP ¾ inch BSP 1 inch BSP 1¼ inch BSP 1½ inch BSP 2 inch BSP SKU: SAW-45180, SAW-45181, SAW-45182, SAW-45183, SAW-45184, SAW-45185 -
Pumps and Plumbing, Fittings
Relaxn Stainless Steel Ball Valves
Relaxn Stainless Steel Ball Valves
• High quality noncorrosive 316 grade stainless steel ball valves.
• Full bore parallel BSP Female threaded ports.Part No. Thread Unit QTY SAW-45543 ¼ inch BSP 1 SAW-45544 ⅜ inch BSP 1 SAW-45545 ½ inch BSP 1 SAW-45545-10 ½ inch BSP 10 SAW-45546 ¾ inch BSP 1 SAW-45546-10 ¾ inch BSP 10 SAW-45547 1 inch BSP 1 SAW-45547-10 1 inch BSP 10 SAW-45548 1¼ inch BSP 1 SAW-45549 1½ inch BSP 1 SAW-45550 2 inch BSP 1 SAW-45551 2½ inch BSP 1 SAW-45552 3 inch BSP 1 SKU: SAW-45543, SAW-45544, SAW-45545, SAW-45545-10, SAW-45546, SAW-45546-10, SAW-45547, SAW-45547-10, SAW-45548, SAW-45549, SAW-45550, SAW-45551, SAW-45552 -
Pumps and Plumbing, Bilge Pumps
RULE 1100GHP Bilge Pump
RULE 1100GHP Bilge Pump
12 volt 1100 GPH 3.7 amp. RULE Model 27DA
Next generation compact, high capacity 1100 GPH submersible electric bilge pumps. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 1100 US gallons per hour – 69 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge
- 3.7 amp draw @ 12v DC. 1.9 amp draw @ 24v DC
- Straight threaded hose outlets for both 25mm (1) and 28mm (1 1/8) hose
Instruction Manual
SKU: RWB0805 -
Pumps and Plumbing, Bilge Pumps
RULE 360GHP Bilge Pump
RULE 360GHP Bilge Pump
12 volt 360 GPH 2.1 amp. RULE Model 24DA
Next generation compact submersible 360 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. This pump is extremely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in 12 volts only.
3 year limited warranty.
- Fully submersible pump – 360 US gallons per hour – 23 litres per minute @ 12v
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 2.1 amp draw @ 12v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0800 -
Pumps and Plumbing, Livewell Pumps
Rule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Pumps and Plumbing, Livewell PumpsRule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Rule 430C – 12V 800GPH Tournament Series Livewell Baitwell Pump – Angled Inlet
Rules tournament 400 series dual port thru-hull Livewell cartridge pumps are built on Rules unsurpassed quality and leadership in design and technology. Installation and plumbing is made easier with rotatable base & outlet.
The angled inlet Tournament Series pump is for through hull applications and features an angled 4 inches (102mm) pickup tube.
This model features a glass filled nylon dual port base for optional washdown pump connection, anti-airlock feature, and a heavy-duty long-life motor. The pump has a 1 inch (25mm) NPT female intake, 1-1/8 inch (29mm) discharge outlet, and a ½ inch (6mm) NPT threaded port for washdown installation.
- 3 Styles available – angled inlet, straight inlet, 3/4″ thread valve mount
- 3 Gallon per hour sizes available – 500 GPH, 800 GPH, 1100 GPH
- All styles have an additional 1/2″ threaded plugged inlet port to allow inlet connection of a deckwash pump if desired
- 360 degree rotatable inlet base + outlet for easier installation
- Supplied with threaded rotatable glass fi lled nylon hose barbs
- 1 each straight & 90 deg (20mm in 500 & 800, 28mm in 1100)
- Easy-grip rubber overmould spring loaded removable motor cartridge
- Long lasting and powerful RULE motors (12 volt only)
- Rugged glass fi lled nylon pick-up tube
- 12 volt only. 3 year limited warranty
Instruction Manual
SKU: RWB0053 -
Pumps and Plumbing, Livewell Pumps
Rule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Pumps and Plumbing, Livewell PumpsRule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Rule 430STC – 12V 800GPH Tournament Series Livewell Baitwell Pump – Straight Inlet
Rules tournament 400 series dual port thru-hull Livewell cartridge pumps are built on Rules unsurpassed quality and leadership in design and technology. Installation and plumbing is made easier with rotatable base & outlet.
The straight inlet pump is for through hull applications and features a straight 4-3/4 inch (121mm) pickup tube.
This model features a glass filled nylon dual port base for optional washdown pump connection, anti-airlock feature, and a heavy-duty long-life motor. The pump has a 1 inch (25mm) NPT female intake, 1-1/8 inch (29mm) discharge outlet, and a ½ inch (6mm) NPT threaded port for washdown installation.
- 3 Styles available – angled inlet, straight inlet, 3/4″ thread valve mount
- 3 Gallon per hour sizes available – 500 GPH, 800 GPH, 1100 GPH
- All styles have an additional 1/2″ threaded plugged inlet port to allow inlet connection of a deckwash pump if desired
- 360 degree rotatable inlet base + outlet for easier installation
- Supplied with threaded rotatable glass fi lled nylon hose barbs
- 1 each straight & 90 deg (20mm in 500 & 800, 28mm in 1100)
- Easy-grip rubber overmould spring loaded removable motor cartridge
- Long lasting and powerful RULE motors (12 volt only)
- Rugged glass fi lled nylon pick-up tube
- 12 volt only. 3 year limited warranty
Instruction Manual
SKU: RWB0052 -
Pumps and Plumbing, Bilge Pumps
RULE 500GHP Bilge Pump
RULE 500GHP Bilge Pump
12 volt 500 GPH 1.6 amp. RULE Model 25DA
Next generation compact submersible 500 GPH electric pump for use as a bilge or bait pump on smaller craft. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 500 US gallons per hour – 31 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 99mm Height x 74mm Width x 64mm depth – not including discharge
- 1.6 amp draw @ 12v DC. 0.8 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided.
Instruction Manual
SKU: RWB0801 -
Pumps and Plumbing, Bilge Pumps
RULE 800GHP Bilge Pump
RULE 800GHP Bilge Pump – 12 volt 800 GPH 3.4 amp. RULE Model 20DA
water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offer high capacity output in a very compact housing, to fit into the smallest available space. NON-Automatic pump – requires a Rule float switch to operate automatically. Please note – using the included check valve will reduce the output flow of the pump. Available in both 12 volt & 24 volt models.
3 year limited warranty.
- Fully submersible pump – 800 US gallons per hour – 50 litres per minute
- Higher flow – optimised impeller to provide greater flow at the same amperage as previous model
- High efficiency, low amp draw, ignition protected motor includes true Electromagnetic suppression (EMC)
- 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature – to stop water wicking down inside the wiring
- Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
- Backflow prevention – now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
- Please note – using the check valve will reduce the rated output flow.
- Threaded discharge port – gives easier installation and maintenance.
- Discharge hose port is included with each pump
- Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
- Compact – 112mm Height x 74mm Width x 64mm depth – not including discharge
- 3.4 amp draw @ 12v DC. 1.7 amp draw @ 24v DC
- Threaded hose outlet suits 20mm (3/4″) hose. 1 x straight port provided
Instruction Manual
SKU: RWB0803 -
Pumps and Plumbing, Bilge Pumps
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
Rule IL280P – Slimline Submersible and Inline Pump 280GPH
The Rule 280 GPH (Gallons Per Hour) In- Line Pump is a muti-purpose submersible in-line pump that can be used for water (either fresh or salt) as well as diesel. Whether you use it as a transfer pump for fuel, as a bilge, or for deck pumping requirements like a deck wash/wash down, then this heavy duty pump is incredibly reliable. The Rule name has been long associated with bilge pumps and this is with good reason. Hard wearing, heavy duty and destined for longevity, Rule pumps are built tough to deal with the rigors of a harsh marine and off-road environment. Having a reliable bilge pump can make the difference between having a minor incident on the water or a disaster; and is something that should be very strongly considered: without one it is up to you to manually bail out any water that finds its way into your boat. For the full range of pumps, hoses, fittings and clamps available at BCF call in store and talk to one of our friendly knowledgeable staff to find the product that is right for you.
- 280 GPH
- 12 volt
- Pumps fresh and seawater, diesel and anti-freeze
- Wash down for cars, vehicles, anchors and decks
- Deck shower
- Under engine bilge pumping
- Diesel refueling and transfer
- Garden watering
- Container filling and emptying
- Sink draining
- Engine winterizing
- Kits include hose, battery clips and adjustable spray nozzle (see specifications tab)
Instruction Manual
SKU: RWB0085 -
Pumps and Plumbing, Bilge Pumps, Electrical, Switches
Rule Super Switch Bilge Pump Float Switch
Rule Super Switch Bilge Pump Float Switch
RULE SuperSwitch – to 20 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
Designed for the toughest applications and backed by a Rule 5 year warranty. Heavy duty double insulated blocked wiring and a wide, free action fl oat give superior buoyancy and performance. Removable snap-on base for easy fi tting, cleaning and servicing. The SuperSwitch is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 20 amp. It suits all models of Rule DC non-automatic pumps. Base footprint : 66 x 45mm. 135mm length x 54mm width.
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0019 -
Pumps and Plumbing, Bilge Pumps, Electrical, Switches
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-MATIC Bilge Pump Float Switch
RULE-A-Matic float switch – to 14 amp
Rule Automatic Float Switches are the world’s largest selling marine fl oat switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple, non-mercury, environmentally responsible snap switches which have been tested to over 1 million cycles. All are ignition protected, ultrasonically welded and sealed, to give reliable, troublefree service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. Different models are available to suit various pump amperage loads. No battery drain and no exposed metal to corrode.
This non-mercury automatic fl oat switch has set the standard for the marine industry for years. It has improved blocked wiring for greater durability and water resistance which has again raised the standard. Removable snap-on base for easy fi tting, servicing and cleaning. It is suitable for any brand of submersible bilge pump 12v – 24v – 32 volt with a maximum draw of 14 amp. It suits all Rule DC non-automatic pumps except the 3700 & 4000GPH 12v pumps. 2 year limited warranty. Base footprint : 66 x 45mm. 127mm length x 45mm width
Instruction Manual
Inside a Rule Float Switch
SKU: RWB0022 -
Pumps and Plumbing, Bilge Pumps
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate Bilge Pump – 500/800/1100 GHP
Rule-Mate bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design.
Rule-Mate bilge pumps operate using an internal level sensor.
- For 500/800/1100 GPH models, when water reaches 2 inches (5 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 3/8 inches (0.9 cm) the pump will turn off until the water level rises again
- For 1500/2000 GPH models, when water reaches 2-3/4 inches (7 cm), the pump will automatically activate, removing water from the bilge. When the water level reaches 5/8 inches (1.6 cm) the pump will turn off until the water level rises again
Bilges are not always clean and free from debris. If the Rule-Mate level sensor becomes fouled by debris or contaminated water, its unique back-up feature will prevent the pump from entering a run-on condition, protecting the battery while maintaining automatic operation.
PRODUCT FEATURES
- Higher Flow — optimized impeller to provide up to 10% more flow at the same amperage as previous models with capacities from 500-2000 GPH (1893-7571 LPH)
- Auto Sense Intelligence — integral water level sensor controls the pump automatically
- Back Up Feature — prevents continuous running if sensor is fouled by debris, pump reverts to 2.5 minute cycle mode
- Smaller Footprint — 2/3 the size of previous models (500-1100 GPH models only)
- Built-In Thermal Cut-Off (TCO) — provides added protection for pump and vessel
- Back Flow Prevention — reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner (500-1100 GPH models only)
- Hidden Air Vents in the Body — helps prevent air locking in challenging plumbing installations and helps with the check valve (500-1100 GPH models only)
- Threaded Discharge — easier installation, easier maintenance
Instruction Manual
Rule-Mate Bilge Pump Key Features Overview
SKU: RWB0822, RWB0824, RWB0826 -
Pumps and Plumbing, Boating Accessories, Livewell Pumps
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
Pumps and Plumbing, Boating Accessories, Livewell PumpsRWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Marine Deluxe Livewell Bait Tank with Hatch, Rule Pump & Flowrite Fittings
RWB Deluxe Livewell Bait Tank Kit.
- 1 x RWB Marine 30 Litre tank
- 1 x QWIK-LOK Rule pump adaptor
- 1 x Threaded standpipe 12″
- 1 x Drain outlet heavy duty hose 28mm x 1.6M
- 1 x In-line heavy duty hose 20mm x 1.6M
- 2 x Stainless steel hose clamp 21-38mm
- 2 x Stainless steel hose clamp 13-25mm
- 1 x Nuova Rade hatch 375mm x 275mm Italian made
- 1 x Rule Tournament 403 dual port 800GPH pump
- 1 x Threaded standpipe drain elbow
- 1 x QWIK-LOK Thru hull straight outlet 1 1/8″
- 1 x QWIK-LOK spray head
- 1 x QWIK-LOK straight sockets 3/4″
- 2 x QWIK-LOK straight sockets 1 1/8″
- 1 x QWIK-LOK adaptor for Rule pump 3/4″
SKU: RWB10184 -
Fuel Tanks & Accessories, Pumps and Plumbing
RWB Marine Flo n Go Maxflo Syphon Pump
RWB Marine Flo n Go Maxflo Syphon Pump
The Flo n’ Go MaxFlo pump turns your gas can in to a safe, quick and easy fluid transfer system. The patented pump allows you to stop and restart the flow of fuel with the press of a trigger. No lifting. No spills. No overfills. Child safety lock. Flow rate of 2 gallons per minute in Siphon Mode.
SKU: RWB3432 -
Fittings, Pumps and Plumbing
Scupper Valve White Acetal Surface Mount – 70mm OD (138814)
Scupper Valve White Acetal Surface Mount – 70mm OD (138814)
Designed as a water exit for boats with self draining cockpits. Scupper mounts over flush transom drains above the waterline. The rubber flapper opens to dump water out and closes to prevent backwash. Tough acetal mount flange.
Features:
BLA Code: 138814
Diameter OD mm: 70
ID mm: 38
Mount Screws mm: 4 c/sSKU: 138814