Outboard Parts
Showing 61–90 of 190 results
-
Outboard Parts, Steering
MULTIFLEX Steering Cable – 25ft / 7.62m
MULTIFLEX Steering Cable – 25ft / 7.62m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7617 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 8ft / 2.44m
MULTIFLEX Steering Cable – 8ft / 2.44m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7600 -
Outboard Parts, Steering
MULTIFLEX Steering Cable – 9ft / 2.74m
MULTIFLEX Steering Cable – 9ft / 2.74m
Measuring Steering Cables Add A + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands.
SKU: RWB7601 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – B7HS-10
NGK Boat/Marine Spark Plug – B7HS-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - B7HS-10 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – B8HS-10
NGK Boat/Marine Spark Plug – B8HS-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - B8HS-10 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – BP8H-N-10
NGK Boat/Marine Spark Plug – BP8H-N-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - BP8H-N-10 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – BPR6EFS
NGK Boat/Marine Spark Plug – BPR6EFS.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - BPR6EFS -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – BR7HS-10
NGK Boat/Marine Spark Plug – BR7HS-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - BR7HS-10 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – BR8HS-10
NGK Boat/Marine Spark Plug – BR8HS-10.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - BR8HS-10 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – DPR6EB-9
NGK Boat/Marine Spark Plug – DPR6EB-9.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - DPR6EB-9 -
Outboard Parts, Spark Plugs
NGK Boat/Marine Spark Plug – DR7EA
NGK Boat/Marine Spark Plug – DR7EA.
*Please check the codes and images to ensure this item is suitable for your needs. If you are unsure whether it is suitable please contact us with your motor details (i.e. serial number, model number, year, horsepower, brand, etc), and we can assist you.
SKU: NGK Boat/Marine Spark Plug - DR7EA -
Boating Accessories, Outboard Parts
Outboard Motor Flusher – Oval
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
Shape Rubber Size (mm) Suitable For Small Round 90 Small Outboards Oval 120 x 90 Medium to Large Rectangle 130 x 85 Medium to Large SKU: Outboard Motor Flusher - Oval -
Boating Accessories, Outboard Parts
Outboard Motor Flusher – Rectangle
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most medium to large sterndrive & outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
Shape Rubber Size (mm) Suitable For Small Round 90 Small Outboards Oval 120 x 90 Medium to Large Rectangle 130 x 85 Medium to Large SKU: Outboard Motor Flusher - Rectangle -
Boating Accessories, Outboard Parts
Outboard Motor Flusher – Small Round
Black rubber, cup style, used to feed water into the cooling system of an engine to flush out salt, sand and other debris after use, or simply to check your enqine performance prior to launching. Uses a sturdy powder coated steel spring to powerfully clamp on to the outboard’s leg and seal the rubber, maximising water pressure. Suits most small outboards with side water inlets on the lower leg/drive unit (*If unsure whether these are suitable please check your owners manual or contact us with your motor details). Easy to connect – Simply slide cups over the top of the water intake slots, & connect your garden hose to the quick connect male fitting moulded into side (refer images).
*Please note: As a guide if an engine does not start pumping water after 4 to 5 seconds of using these flushers turn engine off and reposition flushers/ear muffs to prevent over heating/water pump burnout, and try again. If this does not fix the problem, turn off engine and seek advice.
Sizing Chart & Suitability:
Shape Rubber Size (mm) Suitable For Small Round 90 Small Outboards Oval 120 x 90 Medium to Large Rectangle 130 x 85 Medium to Large SKU: Outboard Motor Flusher - Small Round -
Deck Fittings, Rigging
Rigging Hose 50mm / Mtr – Black (192524M)
Rigging Hose 50mm / Mtr – Black (192524M)
All the components required to complete a professional rigging system. Protects outboard engine cables and wiring from dirt, abrasion, sun, salt and water. The hose is durable, flexible and kink resistant. The mount flanges and split union are moulded from U.V. stabilised polypropylene.
Features
BLA Code: (B) 192524
Description: Rigging hose 50mm x 1m (sold per metre)
Colour: BlackSKU: 192524 -
Outboard Parts
RWB Marine Outboard Motor Support Bracket
RWB Marine Outboard Motor Support Bracket
“MOTO FLEX” deluxe support bracket for motors up to 150HP. Supports motor leg while towing. Heavy gauge plated steel tubing & shock absorbing spring steel coil. The “U” end hooks over the trailer chassis and the padded “V” end supports the motor leg. Supplied complete with rubber securing strap with end hooks.
SKU: RWB0616 -
Outboard Parts
RWB Marine Outboard Motor Trolley
RWB Marine Outboard Motor Trolley
Suits standard 2 stroke motors to approximately 20 HP – or 4 strokes to a maximum weight limit of 50Kg Plated steel frame with plastic end caps on all tube ends and soft rubber hand grips. Galvanised frame support arms with 150mm diameter plastic wheels. Large wooden support board 390 x 154 x 36mm.
SKU: RWB3875 -
Outboard Parts
SE Sport 200 – High Performance Hydrofoil
SE Sport 200 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244200 Grey 343mm 363mm 8 – 40HP Bolt On SAW-244200-12 Grey 343mm 363mm 8 – 40HP Bolt On SAW-244202 Black 343mm 363mm 8 – 40HP Bolt On SAW-244202-12 Black 343mm 363mm 8 – 40HP Bolt On SKU: SAW-244200, SAW-244200-12, SAW-244202, SAW-244202-12 -
Outboard Parts
SE Sport 300 – High Performance Hydrofoil
SE Sport 300 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Rated fastest in independent tests
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244206 Grey 368mm 432mm 40 – 350HP Bolt On SAW-244206-12 Grey 368mm 432mm 40 – 350HP Bolt On SAW-244208 Black 368mm 432mm 40 – 350HP Bolt On SAW-244208-12 Black 368mm 432mm 40 – 350HP Bolt On SAW-244210 White 368mm 432mm 40 – 350HP Bolt On SAW-244210-12 White 368mm 432mm 40 – 350HP Bolt On SKU: SAW-244206, SAW-244206-12, SAW-244208, SAW-244208-12, SAW-244210, SAW-244210-12 -
Outboard Parts
SE Sport 400 – High Performance Hydrofoil
SE Sport 400 – High Performance Hydrofoil
• Reduces plane time dramatically.
• Narrower design with more surface area than most foils.
• Turbo Trac enhances thrust and control.
• Quick planing reduces fuel expense and increases safety.
• Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander.
• Sleek shape complements today’s new boat designs.
• One piece high strength engineering copolymer.
• Drill free or bolt on.
• Stainless steel hardware included.
• Manufacturer’s lifetime warranty.PART NUMBER COLOUR LENGTH WIDTH SUITS MOTOR INSTALLATION SAW-244212 Grey 406mm 432mm 40 – 350HP Disk Grips SAW-244212-6 Grey 406mm 432mm 40 – 350HP Disk Grips SAW-244214 Black 406mm 432mm 40 – 350HP Disk Grips SAW-244214-6 Black 406mm 432mm 40 – 350HP Disk Grips SAW-244220 SE Sport 400 Mounting Kit — — — — SKU: SAW-244212, SAW-244212-12, SAW-244214, SAW-244214-12, SAW-244220 -
Deck Fittings, Rigging
Slop Stopper Oval 115x60mm Cut Out – Rubber (192504)
Slop Stopper Oval 115x60mm Cut Out – Rubber (192504)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (C) 192504
Outside Dia.mm: 135×83
Cut Out mm: 115×60
Intrusion mm: 46
Max. Panel Thickness mm: 5SKU: 192504 -
Deck Fittings, Rigging
Slop Stopper Round 63mm Cut Out – Rubber (192502)
Slop Stopper Round 63mm Cut Out – Rubber (192502)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (B) 192502
Outside Dia.mm: 88ø
Cut Out mm: 63 dia.
Intrusion mm: 46
Max. Panel Thickness mm: 6SKU: 192502 -
-
Outboard Parts
Telescopic Motor Extension Handle
Telescopic Motor Extension Handle
Convenient telescopic extension handle is easily retro fitted to most outboard motors utilising a hand twist throttle control. High quality handle and mechanism with plastic bracket for easy connection over the existing motor throttle handle. The heavy duty 25mm tube extends from 610mm to 1010mm.
SKU: EJM-260148 -
Deck Fittings, Rigging
Trim Ring Oval 115x60mm Cut Out – Rubber (192503)
Trim Ring Oval 115x60mm Cut Out – Rubber (192503)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (D) 192503
Outside Dia.mm: 135×80
Cut Out mm: 115×60
Intrusion mm: n/a
Max. Panel Thickness mm: 5SKU: 192503 -
Deck Fittings, Rigging
Trim Ring Round 63mm Cut Out – Rubber (192500)
Trim Ring Round 63mm Cut Out – Rubber (192500)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (A) 192500
Outside Dia.mm: 88ø
Cut Out mm: 63 dia.
Intrusion mm: n/a
Max. Panel Thickness mm: 6SKU: 192500 -
Gauges, Outboard Parts
Uflex Ammeter (86134)
Uflex Ammeter (86134)
• Ultra white dial with a stainless steel bezel.
• Domed glass lens.
• Diesel Tackometer sender required for diesel engines.
• Ultra white dial with a stainless steel bezel.
• Domed glass lens.
• 53mm mounting hole required for installation.Features:
Part No.: 86134
Description: Amp meter – White 60-0-60
Volts: 12SKU: 86134 -