Boating Accessories
Showing 721–750 of 768 results
-
Boating Accessories
Toggle Latch Adjustable Hatch Fastener (29792)
Toggle Latch Adjustable Hatch Fastener (29792)
• Constructed entirely in 304G stainless steel.
• Polished to a bright finish.
• Length can be adjusted with threaded shaft.Features:
Part No.: 29792
Description: Toggle Latch Fully Adjustable
Min Length – Max Length(mm): 108- 132
Mounting Holes: 4 x 5.5mm
Length O.A.(mm): 125
Padlock Shckle(mm): 5.5SKU: 29792 -
Boating Accessories
Toggle Latch Adjustable Hatch Fastener (29795)
Toggle Latch Adjustable Hatch Fastener (29795)
• Constructed entirely in 304G stainless steel.
• Polished to a bright finish.
• Length can be adjusted with threaded shaft.Features:
Part No.: 29795
Description: Stainless Steel Hatch Fastener
Min Length – Max Length(mm): 172 – 196
Mounting Holes: 4 x 5.5mm
Length O.A.(mm): 180
Padlock Shckle(mm): 5.5SKU: 29795 -
Deck Fittings
Transducer Sliding Bracket Transom Mount 152mm – Alloy (192666)
Transducer Sliding Bracket Transom Mount 152mm – Alloy (192666)
Fishfinder transducers on trailerable boats are susceptible to damage, particularly if launching off the beach. These adjustable transom mounted brackets enable the transducer to be retracted out of harms way until required. Transducer can be raised and lowered in seconds.
Features:
BLA Code: 192666
Material: Alloy
Transducer Type: Transom mnt
a mm: 205
b mm: 152
c mm:
d mm: 63SKU: 192666 -
Deck Fittings
Transducer Sliding Bracket Transom Mount 84mm – Alloy (192665)
Transducer Sliding Bracket Transom Mount 84mm – Alloy (192665)
Fishfinder transducers on trailerable boats are susceptible to damage, particularly if launching off the beach. These adjustable transom mounted brackets enable the transducer to be retracted out of harms way until required. Transducer can be raised and lowered in seconds.
Features:
BLA Code: 192665
Material: Alloy
Transducer Type: Transom mnt
a mm: 205
b mm: 84
c mm:
d mm: 51SKU: 192665 -
Deck Fittings, Rigging
Trim Ring Oval 115x60mm Cut Out – Rubber (192503)
Trim Ring Oval 115x60mm Cut Out – Rubber (192503)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (D) 192503
Outside Dia.mm: 135×80
Cut Out mm: 115×60
Intrusion mm: n/a
Max. Panel Thickness mm: 5SKU: 192503 -
Deck Fittings, Rigging
Trim Ring Round 63mm Cut Out – Rubber (192500)
Trim Ring Round 63mm Cut Out – Rubber (192500)
Splashproof black rubber boot. Prevents chafing of cables through motor well. Also available as round or oval trim ring only.
Features:
BLA Code: (A) 192500
Outside Dia.mm: 88ø
Cut Out mm: 63 dia.
Intrusion mm: n/a
Max. Panel Thickness mm: 6SKU: 192500 -
-
-
-
-
Deck Fittings
Ultralon U-DOT Marine Deck Tread
U-Dot is the newest closed-cell foam deck tread from Ultralon. The unique pressed dot pattern with buff finish, provides a anti-slip deck tread that is a durable, hard wearing and easy to maintain whilst offering a modern aesthetic.
U-Dot can be laminated with a contrasting base colour foam and routered for a truly custom look and fit.
COLOURS: Light Grey, Winter Grey, Steel Grey
FINISHES: Buff Dot
SHEET SIZE: 2050mm x 1030mm x 3mm (82” x 41” x 0.118”)*IN STORE PICK UP ONLYSKU: PMAR6530L -
Deck Fittings
Ultralon U-TREAD Marine Deck Tread
U-Tread Octi and Z Tread decking is a closed-cell foam, anti-slip, hard wearing deck tread suitable for floors, rails, trailers and general wet areas. Improving underfoot comfort and safety whilst increasing the protection of your boat. Supplied pre-glued with marine-grade, double-sided adhesive. Suitable for DIY installation.
Available in full sheets or in small packs.COLOURS: Light Grey, Steel Grey, White, Yellow
FINISHES: Z Tread, Octi Tread
SHEET SIZE: 2050mm x 1030mm x 6mm (82” x 41” x 0.24”)*IN STORE PICK UP ONLY
SKU: PMAR5528L -
Boating Accessories, Ladders
Under Platform 2 Step Telescopic Ladder with Catch (47268)
Under Platform 2 Step Telescopic Ladder with Catch (47268)
• Push button release.
• 304G Stainless Steel.
• 2.54 mm centrum width.
• Mounting Plate -300mm x 290mm.Features:
Part No: 47268
Description: 2 Step Stainless Steel Telescopic Ladder With Catch
Length (mm): 600
Width (mm): 290SKU: 47268 -
Boating Accessories, Ladders
Under Platform 3 Step Telescopic Ladder with Catch (47269)
Under Platform 3 Step Telescopic Ladder with Catch (47269)
• Push button release.
• 304G Stainless Steel.
• 2.54 mm centrum width.
• Mounting Plate – 300mm x 290mm.Features:
Part No: 47269
Description: 3 Step Stainless Steel Telescopic Ladder With Catch
Length (mm): 600
Width (mm): 290SKU: 47269 -
Boating Accessories, Rod Holders
Universal Side Mount Plastic Rod Holder – Black (49216)
Universal Side Mount Plastic Rod Holder – Black (49216)
• This rod holder is a streamline design.
• 6 x 4mm mounting screw holes.
• Mounting Bracket – 134mm x 75mm.Features:
Part No:49216
Description:Side Mount Plastic Rod Holder White
Length(mm):235
Width(mm):72
Shaft ID(mm):43SKU: 49216 -
Boating Accessories, Rod Holders
Universal Side Mount Plastic Rod Holder – White (49218)
Universal Side Mount Plastic Rod Holder – White (49218)
• This rod holder is a streamline design.
• 6 x 4mm mounting screw holes.
• Mounting Bracket – 134mm x 75mm.Features:
Part No:49218
Description:Side Mount Plastic Rod Holder White
Length(mm):235
Width(mm):72
Shaft ID(mm):43SKU: 49218 -
Boating Accessories
Vented Door (38268)
Vented Door (38268)
• 316G Stainless Steel Latch and Hinge.
• Hidden Fastener.
• 180⁰ plus opening- door made of saralon resin suitable for all marine environments and RV applications.
• Inlaid gasket for sealing.
• Inside Dimensions 393.70mm x 342.90mm x 41mm Deep.
• Imperial Cutout Dimensions: 16 – 1/4″ long x 14 – 1/4″ wide x 1″.
• Imperial Inside Dimensions: 15 – 1/2″ long x 13 – 1/2″ wide x 1/2″ deep.
• Made in U.S.A.Features:
Part No: 38268
Description: Vented Door (18″ x 16″)
Over all Size (mm): 406 x 457
Opening (mm): 180+
Cut out: 412.75 x 361.95
Mounting Holes: 16 x 5mmSKU: 38268 -
Rod Holders
Viper Pro Series Deluxe Stainless Rod Holder – 30 degree (BM-10001)
Viper Pro Series Deluxe Stainless Rod Holder – 30o Angle (BM-10001)
Heavy duty cast stainless steel rod holder with bottom gimble to support rod. Flush fitting with pre-drilled fastening holes. Heavy duty construction, which are fully welded, and hand polished to a shiny finish. Strong enough for offshore and bay fishing. Complete with cap to prevent water ingress.
SKU: BM-10001 -
Boating Accessories, Ventilation
Webasto Air Conditioning Accessories – Ducting
Webasto Air Conditioning Accessories – Ducting
For original installation or re-fits where outlets and intakes may need to be repositioned, a selection of Accessories are available. The range of supply and return grilles include plastic or teak in fixed, adjustable or four way. Transition boxes include back entry and no entry, while insulated ducting and attachment rings are available to complete the system.
BLA CODEDESCRIPTIONDIA. MMLENGTH M179660 
Oval ring 100 – 179668 Y Connector 125 x 125 x 100 – 179670 Y Connector 125 x 125 x 125 – 179680 
Insulated ducting 102 3 179682 Insulated ducting 127 3 SKU: 179660, 179668, 179670, 179680, 179682 -
Boating Accessories, Ventilation
Webasto Air Conditioning Accessories – Supply and return grilles
Webasto Air Conditioning Accessories – Supply and return grilles
For original installation or re-fits where outlets and intakes may need to be repositioned, a selection of Accessories are available. The range of supply and return grilles include plastic or teak in fixed, adjustable or four way. Transition boxes include back entry and no entry, while insulated ducting and attachment rings are available to complete the system.
BLA CODEDESCRIPTIONMATERIALCOLOURBLADE TYPEDIMENSIONS W X H MM179600 
Grille supply Plastic White Adjustable 254 x 102 179606 
Grille supply Plastic White Fixed 254 x 127 179626 Grille supply Teak – 4 Way 254 x 127 179630 Grille return Plastic White Fixed 254 x 203 SKU: 179600, 179606, 179626, 179630 -
Boating Accessories, Ventilation
Webasto Air Conditioning Accessories – Transition box
Webasto Air Conditioning Accessories – Transition box
For original installation or re-fits where outlets and intakes may need to be repositioned, a selection of accessories are available. The range of supply and return grilles include plastic or teak in fixed, adjustable or four way. Transition boxes include back entry and no entry, while insulated ducting and attachment rings are available to complete the system.
BLA CODEDESCRIPTIONTYPECONNECTIONDIMENSIONS W X HMM179650 
Transition box Back entry Round 254 x 102 179656 Transition box No entry Blank 254 x 127 SKU: 179650, 179656 -
Boating Accessories, Hatches and Ports
Whale Watertight Locker Doors – Polypropylene
Whale Watertight Locker Doors – Polypropylene
Locker doors provide a reliable watertight seal. Raised screw down lid. Easy to open via the maximum diameter external grip. Moulded from black polypropylene with a choice of black or clear lid. Wide caulking flange enhances waterproofing.
BLA CODELID COLOUROUTSIDE DIA. MMINSIDE DIA. MMMOUNT SCREWS MM174240 
Black 235 180 5 r/h 174242 
Clear 235 180 5 r/h SKU: 174240, 174242 -
Boating Accessories
White Nylon Scupper Valve (45486)
White Nylon Scupper Valve (45486)
• Made from white nylon material with a rubber flap valve that opens to let water out then seals back to prevent water entering.
• Supplied with stainless steel screws.Features:
Part No.: 45486
Description: White Nylon Scupper Valve
Diameter (mm): 70
Mount Holes (mm): 4 x 3SKU: 45486 -
Boating Accessories
White Plastic Deck Vent (30540)
White Plastic Deck Vent (30540)
• 2 part vent, base has a 70mm hole
• Designed to drain away any rain or sea water that flows in with air intake for a
cabin, engine room etcFeatures:
Part No: 30540
Description: White Plastic Cowl Vent
Length (mm): 193
Width (mm): 149
Height (mm): 105
Mount Hole: 4 x 5mmSKU: 30540
