Anchoring and Mooring
Showing 151–168 of 168 results
-
Anchoring and Mooring, Bollards and Cleats
SAW Pop-up Relaxn Cleats – Stainless Steel
SAW Pop-up Relaxn Cleats – Stainless Steel
Introducing Relaxn’s New Stainless Steel Pop-Up Cleat. Machined from 316G stainless steel with a highly polished mirror finish the Pop-Up Cleat will shine on any deck. The low profile design will enhance the curves and lines of your vessel while the drainage system will allow water to freely drain where you want it to.
- Heavy-Duty: High quality 316G stainless steel.
- Sleek Design: Highly polished mirror finish.
- Reduces Deck Clutter: When the cleat is not in use, it almost sits flush with the deck.
- Rattle Free: Shafts are sleeved for smooth rattle free operation.
- Drains Excessive Water: Drainage system removes built up water.
- Mounting Hardware: Stainless steel mounting nuts included.
PART NUMBER LENGTH SAW-29173 160mm SKU: SAW-29173 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Cross Bollards
SAW Stainless Steel Cross Bollards
Traditionally styled heavy duty 316G polished stainless steel bollards to suit most size boats.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29098 60mm x 60mm 90mm 90mm 6mm SAW-29099 76mm x 76mm 110mm 115mm 8mm SAW-29096 140mm x 185mm 140mm 155mm 10mm SKU: SAW-29096, SAW-29098, SAW-29099 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – No Pin
SAW Stainless Steel Split Bollard – No Pin
316 marine-grade stainless steel cross bollard featuring a split for securing anchor chain through the centre.
This split bollard will accept chain links from 8mm to 10mm.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT MOUNTING HOLES SAW-29101 62mm x 62mm 94mm 84mm 4 x 6mm – hole centres are 41mm apart SKU: SAW-29101 -
Anchoring and Mooring, Bollards and Cleats
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
-8%Anchoring and Mooring, Bollards and CleatsSAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
SAW Stainless Steel Split Bollard – Spring Loaded Captive Pin
Heavy duty 316G stainless steel cross bollards with a centre split for securing anchor chain into the bollard.
In addition, this cross bollard features a captive spring pin for locking in general link chain.
PART NUMBER BASE DIMENSIONS WIDTH HEIGHT CHAIN LINK SIZE MOUNTING HOLES SAW-29100 62mm x 62mm 122mm 84mm 8-10mm Long Link 4 x 7mm holes with 41mm centres SAW-29102 86mm x 86mm 140mm 115mm 10-13mm 4 x 8mm holes with 57mm centres SKU: SAW-29100, SAW-29102 -
Anchoring and Mooring, Bollards and Cleats
SAW Standard Duty Cleats – Stainless Steel
SAW Standard Duty Cleats – Stainless Steel
Highly Polished 316G stainless steel finish.
PART NUMBER DESCRIPTION LENGTH WIDTH SAW-29175 6”(150mm) 316 S/S Cleat 150mm 45mm SAW-29176 8”(200mm) O/Base Stainless Steel Cleat 316 200mm 55mm SAW-29177 316 25cm O/Base Stainless Steel Cleat 250mm 67mm SAW-29179 300mm 316 Stainless Steel Cleat 300mm 87mm SKU: SAW-29175, SAW-29176, SAW-29177, SAW-29179 -
Fenders, Floats, Buoys, Boat Hooks, Anchoring and Mooring
SAW Supafend Boat Fender – Black / Blue Tip
-13%Fenders, Floats, Buoys, Boat Hooks, Anchoring and MooringSAW Supafend Boat Fender – Black / Blue Tip
SAW Supafend Boat Fender – Black / Blue Tip
Supafend PVC Boat Fenders are “one-piece” rotationally moulded with non-marking and UV stabilized Marine Grade PVC.
They are built tough to last with consistent wall thickness and specially designed extra heavy-duty rope eyelet ends.
All fenders are factory tested prior to dispatch to ensure they provide maximum durability and reliability.
Inflate with a sports ball inflation needle and pump.
PART NUMBER TIP COLOUR SIZE LENGTH WIDTH SAW-376012BLK Black S 415mm 140mm SAW-376012BLU Blue S 415mm 140mm SAW-376014BLK Black M 600mm 200mm SAW-376014BLU Blue M 600mm 200mm SAW-376018BLK Black L 800mm 260mm SAW-376018BLU Blue L 800mm 260mm SAW-376020BLK Black XL 950mm 320mm SAW-376020BLU Blue XL 950mm 320mm SKU: SAW-376012BLK, SAW-376012BLU, SAW-376014BLK, SAW-376014BLU, SAW-376018BLK, SAW-376018BLU, SAW-376020BLK, SAW-376020BLU -
Fenders, Floats, Buoys, Boat Hooks, Anchoring and Mooring
SAW Supafend Dock Wheel – Pacific / Superior
Fenders, Floats, Buoys, Boat Hooks, Anchoring and MooringSAW Supafend Dock Wheel – Pacific / Superior
SAW Supafend Dock Wheel – Pacific / Superior
Supafend Pacific / Superior Dock Wheel Complete Kit
Supafend Dock Wheels are designed to protect and guide your boat while maneuvering in and out of your marina berth. Our latest “Fit & Forget” FOAM-FILLED design is a considerable upgrade of our timeproven dock wheel that was first introduced back in 1999. Supafend Dock Wheels are best located on the corner or “blind spot” and many boat owners are also locating them at intervals up the length of their marina. Their capacity to protect and move with your boat is unrivaled. “The ultimate protection against sudden wind shifts and tidal currents.” They are especially useful for vessels with limited steering control during berthing. PART NO. 376009SKU: SAW-376009 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
SAW Supafend Dock Wheel – Single, Supafend
SAW Supafend Dock Wheel – Single, Supafend
Supafend Dock Wheels are designed to protect and guide your boat while manoeuvring in and out of your marina berth. This product is best located on the corner or “blind spot” and many boat owners are also locating them at intervals up the length of their marina. Their capacity to protect and move with your boat is unrivalled.
The wheel is non-marking and consists of a sealed one-piece rotationally molded tyre made of Marine Grade PVC with special ultra-high UV resistant additives to prevent perishing under our severe Southern Hemisphere sunlight and climate.
The unique closed-cell PU foam formulation and injection technique was designed exclusively for Supafend by the worlds leading global PU Foam specialist. This has ensured correct internal dispersion and adhesion of the foam to the PVC wheel while producing optimum cushioning.
Dock Wheel hubs are made of DuPont™ Supertuff Zytel® Nylon that will not corrode or crack and does not require bearings, bushings or any form of lubrication. They are hard-wearing and will not seize against its axle.
Single Wheel Bracket(design Type-A) suited to most vessels up to 40 feet, it is designed and manufactured from Galvanized Steel for strength, Multi-Fit fixing, and anti-corrosive qualities. The PVC wheel can be removed/reinstalled easily and securely into its axle via a unique injection molded Nylon Cap.
The Multi-Fit base plate with slotted bolting pattern enables it to be fixed simply to the top surface of most wooden marinas, including various “multi-layered” plank configurations. Four large galvanized coach screws are supplied with the Dock Wheel.
PART NUMBER LENGTH WIDTH WEIGHT SAW-376002 350mm 210mm 6.5kg SKU: SAW-376002 -
Fenders, Floats, Buoys, Boat Hooks, Anchoring and Mooring
SAW Supafend PVC Boat Fenders
SAW Supafend PVC Boat Fenders
Supafend Boat Fenders are “one-piece” rotationally molded with non-marking and UV stabilized Marine Grade PVC.
They are built tough to last with consistent wall thickness and specially designed extra heavy-duty rope eyelet ends.
All fenders are factory tested prior to dispatch to ensure they provide maximum fendering durability and reliability.
Inflate with a sports ball inflation needle and pump.
PART NUMBER DESCRIPTION LENGTH WIDTH COLOUR SAW-376012 Supafend White PVC Fender (Small) 415mm 140mm White SAW-376014 Supafend White PVC Fender (Medium) 600mm 200mm White SAW-376018 Supafend White PVC Fender (Large) 800mm 260mm White SAW-376020 Supafend White PVC Fender (Extra Large) 950mm 320mm White SKU: SAW-376012, SAW-376014, SAW-376018, SAW-376020 -
Anchoring and Mooring, Bollards and Cleats
SAW Weld On Alloy Cleat
SAW Weld On Alloy Cleat
Cast Alloy Cleat – Weld On (Medium).
- Marine grade alloy.
- Weld cleat directly to the deck and paint for a desired finish.
- Pilot hole dimples underneath
PART NUMBER PACK SIZE L X W X H BASE SAW-293719 Single 230mm x 75mm x 65mm 125mm x 75mm SAW-293719-BULK 20 230mm x 75mm x 65mm 125mm x 75mm SKU: SAW-293719, SAW-293719-BULK -
Winches
SAW Winch Handle – Floating
SAW Winch Handle – Floating
• Made from glass fibre reinforced plastic providing a strong but light weight product.
• Ball bearings in the handle provide a fast and smooth cranking.
• Floats if dropped over board.
• Quick lock and unlock feature.PART NUMBER LENGTH SAW-70720 254mm (10″) SKU: SAW-70720, SAW-70720-6 -
Anchoring and Mooring, Fenders, Floats, Buoys, Boat Hooks
Sidewind Fender Twin Packs with Lanyards
Sidewind Fender Twin Packs with Lanyards
Sidewind range is an excellent fender product suitable for a wide range of vessels. Blow moulded construction creates a traditional tough durable fender with large eyes for rope attachment. Sold in a convenient twin pack with rope lanyard pre-attached.
Available in 3 sizes:
- 16″ x 4.5″
- 20″ x 5.5″
- 23″ x 6.5″
SKU: 327144, 327155, 327165 -
Anchoring and Mooring, Bollards and Cleats
Stainless Easy Lift Folding 6″ Cleat
Stainless Easy Lift Folding 6″ Cleat
Convenient low profile heavy duty cast stainless steel fold away cleat. Simply folds down when not in use to create an extremely smooth non-obstructing deck fitting with low profile appearance. Indented finger lift for easy retrieval, simply push to fold away. When raised the silhouette creates a traditional strong mooring cleat.
SKU: BBB-FM99109 -
Anchoring and Mooring, Bollards and Cleats
Stainless Steel Pull Up Cleat
Stainless Steel Pull Up Cleat
Solid cast 316 grade stainless steel pop-up cleat. Convient, low profile cleat simply slides in to create smooth, non-snag profile. East to install and supplied with large nuts.
SKU: BBB-FM39003, BBB-FM39004 -
Fenders, Floats, Buoys, Boat Hooks, Anchoring and Mooring
Supafend Dual Dock Wheels
Supafend Dual Dock Wheels
Supafend Dock Wheels are designed to protect and guide your boat while manoeuvring in and out of your marina berth. The latest “Fit & Forget” FOAM-FILLED design is a considerable upgrade of the time-proven dock wheel that was first introduced back in 1999.
Supafend Dock Wheels are best located on the corner or “blind spot” and many boat owners are also locating them at intervals up the length of their marina.
Their capacity to protect and move with your boat is unrivalled. “The ultimate protection against sudden wind shifts and tidal currents.”
Dock wheels are especially useful for vessels with limited steering control during berthing. The Dual Wheel Bracket is designed for mounting two dock wheels in tandem for heavy duty applications.
This bracket is designed to be mounted on the vertical “face” of the waler.
Kit Includes:
- 1 x SAW-376007 Type B Dual Dock Wheel Bracket.
- 1 x SAW-376038 BTM Bracket Top Mount.
- 1 x SAW-376040 Coach Bolts 10mm x 75mm – Pack 4.
- 2 x SAW-376002 Dock Wheels With Hubs.
- 4 x Bolts And Nuts.
SKU: SAW-376008