Search results: “minn kota” – Page 4
Showing 91–120 of 162 results
-
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 112LBS ADV I-PILOT LIFT ASSIST 72″ 36V
-9%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 112LBS ADV I-PILOT LIFT ASSIST 72″ 36V
Minn Kota Riptide Terrova 112LBS ADV I-PILOT LIFT ASSIST 72″ 36V – Advanced i-Pilot 112lbs (36V) 72 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 112 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and Humminbird fish finder integration. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601611 -
Minn Kota, Minn Kota Accessories
Minn Kota Electric Steer Stabalizer MKA-55
Minn Kota Electric Steer Stabalizer MKA-55
Minn Kota stabiliser kits are designed to reduce bouncing when underway and trailering. The 603000 Electric steer stabiliser is a universal mount that reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows stabiliser to be easily removed. Pivoting arm can be folded down when not in use.
Owner’s Manual
SKU: 603000 -
Minn Kota, Minn Kota Accessories
Kovix Minn Kota Bracket Lock
Secure your boat’s electric motor and prevent it from theft with this quality stainless steel lock.
The lock also features a plastic cap to provide maximum water and dust resistance. A 5.5mm cylinder locking pin secures the quick release mounting base, shielding it from cutting and hammering.
Features & Benefits:
• Specially designed to suit MINN KOTA Electric Motors
• Secures the Mounting Base
• Stainless Steel body for durability
• Plastic cap to protect against dust & water
• Can also be used to with the Kovix Hitch PinSKU: 215209 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Ulterra 112LBS ADV I-PILOT 72″ 36V
-22%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Ulterra 112LBS ADV I-PILOT 72″ 36V
Minn Kota Riptide Ulterra 112LBS ADV I-PILOT 72″ 36V – Advanced i-Pilot 112lbs (36V) 72 inch Shaft Bowmount Electric Motor with Auto Deloy and Trim
- Stow, deploy, trim and operate your motor from anywhere on the boat. Riptide Ulterra features Auto Stow/Deploy and Power Trim, and comes with your choice of i-Pilot or i-Pilot Link. Fish from anywhere. Dominate everywhere.
- Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder.
- Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
- i-Pilot® GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
4 Reasons to Use a Trolling Motor in Saltwater
SKU: 601624 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Ulterra 112LBS ADV I-PILOT 60″ 36V
-11%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Ulterra 112LBS ADV I-PILOT 60″ 36V
Minn Kota Riptide Ulterra 112LBS ADV I-PILOT 60″ 36V – Advanced i-Pilot 112lbs (36V) 60 inch Shaft Bowmount Electric Motor with Auto Deloy and Trim
- Stow, deploy, trim and operate your motor from anywhere on the boat. Riptide Ulterra features Auto Stow/Deploy and Power Trim, and comes with your choice of i-Pilot or i-Pilot Link. Fish from anywhere. Dominate everywhere.
- Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder.
- Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
- i-Pilot® GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight – as a guide freight to South East Queensland [Gold Coast to Sunshine Coast & west to Toowoomba] is approx. $20-30; Melbourne, Sydney, Adelaide is approx. $40-60; Central & Northern Queensland – Coastal [Bundaberg to Cairns] is approx. $40-60; Perth is approx. $40-60 (we will contact you regarding this depending on location – or simply contact us on 0732658016 for a quote).
Installation Instructions
Owner’s Manual
4 Reasons to Use a Trolling Motor in Saltwater
SKU: 601622 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 72″ 24V
-17%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Ulterra 80LBS ADV I-PILOT 72″ 24V
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 72″ 24V – Advanced i-Pilot 80lbs (24V) 72 inch Shaft Bowmount Electric Motor with Auto Deloy and Trim
- Stow, deploy, trim and operate your motor from anywhere on the boat. Riptide Ulterra features Auto Stow/Deploy and Power Trim, and comes with your choice of i-Pilot or i-Pilot Link. Fish from anywhere. Dominate everywhere.
- Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder.
- Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
- i-Pilot® GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
4 Reasons to Use a Trolling Motor in Saltwater
SKU: 601621 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V
-27%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V
Minn Kota Riptide Ulterra 80LBS ADV I-PILOT 60″ 24V – Advanced i-Pilot 80lbs (24V) 60 inch Shaft Bowmount Electric Motor with Auto Deloy and Trim
- Stow, deploy, trim and operate your motor from anywhere on the boat. Riptide Ulterra features Auto Stow/Deploy and Power Trim, and comes with your choice of i-Pilot or i-Pilot Link. Fish from anywhere. Dominate everywhere.
- Auto Stow & Deploy: Stow or deploy Ulterra just by pushing a button on your i-Pilot or i-Pilot Link remote, foot pedal or Humminbird fish finder.
- Power Trim: Trim Ulterra up or down at the push of a button — on either the foot pedal, the i-Pilot or i-Pilot Link remote or a Humminbird fish finder. Adjust to changing fishing conditions without reaching down to your trolling motor.
- i-Pilot® GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot® uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Integrated Battery Meter: The i-Pilot remote can tell you the exact charge left in your trolling batteries, so you know how much time you have left on the water.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
4 Reasons to Use a Trolling Motor in Saltwater
SKU: 601620 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 72″ 24V
-21%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 72″ 24V
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 72″ 24V – Advanced i-Pilot 80lbs (24V) 72 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 80 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and stow and deploy it effortlessly with new Lift-Assist Design. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601609 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 60″ 12V
-22%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 60″ 12V
Minn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 60″ 12V – Advanced i-Pilot 55lbs (12V) 60 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 55 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and stow and deploy it effortlessly with new Lift-Assist Design. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601605 -
Minn Kota, Minn Kota Accessories
Minn Kota Corded Foot Pedal for Terrova/Riptide Terrova 2017 models and after
-7%Minn Kota, Minn Kota AccessoriesMinn Kota Corded Foot Pedal for Terrova/Riptide Terrova 2017 models and after
Minn Kota Corded Foot Pedal for Terrova/Riptide Terrova
Low-profile design offers two steering options: heel/toe pedal and left/right steering buttons. Includes Spot-Lock activation, rotary speed control dial, momentary/constant on toggle, AutoPilot on/off toggle and 18′ cable with waterproof connector plug. Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot and i-Pilot Link.
FEATURES
- Spot-Lock ON/OFF button with LED indicator
- Low-profile, waterproof design
- Heel/toe pedal and left/right steering options
- AutoPilot ON/OFF button with LED indicator
- Momentary/Constant ON button with LED indicator
- Rotary speed control dial
- 18′ cable with waterproof connector plug
- Plug-n-play with Terrova or Riptide Terrova motors, and works in conjunction with CoPilot, i-Pilot and i-Pilot Link
- Compatible with Terrova and Riptide Terrova trolling motors model year 2017 and after
Owner’s Manual
SKU: 602802 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 60″ 24V
-25%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 60″ 24V
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 60″ 24V – Advanced i-Pilot 80lbs (24V) 60 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 80 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and stow and deploy it effortlessly with new Lift-Assist Design. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601608 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 54″ 24V
-12%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 54″ 24V
Minn Kota Riptide Terrova 80LBS ADV I-PILOT LIFT ASSIST 54″ 24V – Advanced i-Pilot 80lbs (24V) 54 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 80 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and stow and deploy it effortlessly with new Lift-Assist Design. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601606 -
Minn Kota, Minn Kota Saltwater Trolling Motors
Minn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 54″ 12V
-25%Minn Kota, Minn Kota Saltwater Trolling MotorsMinn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 54″ 12V
Minn Kota Riptide Terrova 55LBS ADV I-PILOT LIFT ASSIST 54″ 12V – Advanced i-Pilot 55lbs (12V) 54 inch Shaft Bowmount Electric Motor with Lift Assist
- Riptide Terrova answers every question and leaves no doubt. Power? It’s got 55 pounds of thrust. Control? i-Pilot GPS trolling system including Spot-Lock, and stow and deploy it effortlessly with new Lift-Assist Design. And stealth? It’s a Riptide®. Enough said.
- i-Pilot® Link™ Integrated GPS Trolling System: i-Pilot® Link™ gives you unprecedented control over your boat by linking your trolling motor to your Humminbird® fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
- Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.
- AutoPilot™: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot™, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
- Push-to-Test Battery Meter: Press a button to get an instant “stage of charge” reading.
- Advanced Corrosion Protection: Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Digital Maximizer™: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
- Weedless Wedge™ 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge™ 2 is one of the most trusted props in fishing.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructable composite shaft. It’s a Minn Kota exclusive, and we guarantee it for life.
- Mobile App Compatibility: Control i-Pilot directly from your Apple® or Android™ device with our mobile app. You get quick command of speed, steering, Spot-Lock and Advanced AutoPilot — plus the ability to update i-Pilot software.
- Cool, Quiet Power: Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
*Specifications from suppliers’ information. This unit due to its bulky nature requires an additional surcharge on freight simply contact us on 0732658016 for a quote.
Installation Instructions
Owner’s Manual
How to Install a Minn Kota Riptide Terrova Trolling Motor | Saltwater Boats
SKU: 601604 -
12V Accessories, Electrical, Minn Kota, Minn Kota Accessories
Circuit Breaker 60A – Suitable for Minn Kota Wiring
-18%12V Accessories, Electrical, Minn Kota, Minn Kota AccessoriesCircuit Breaker 60A – Suitable for Minn Kota Wiring
Circuit Breaker 60A – Suitable for Minn Kota Wiring
Heavy duty, Bakelite body with gold plated terminals. Push button reset. Suitable for 12v installations of electric trolling motors, anchor winches and fridges.
Noe: This listing is for a 60A circuit breaker, not 50A as shown in picture.
SKU: Circuit Breaker 60A -
Minn Kota, Minn Kota Accessories
Minn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
Minn Kota, Minn Kota AccessoriesMinn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
Minn Kota Wiring Loom/Harness 300mm Flexible Terminal Link for 24V Systems
BLA Code: 113676Wiring Harness Terminal Link for 24V Electric Motor Systems.
For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required, allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation. Contact us for further information on your requirement, we are happy to help.
SKU: Terminal Link -
Garmin
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
-13%GarminMinn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
BLA Code: 602996
Wiring Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
CADCO wiring looms are available in 3m (this listing) and 6m lengths and are made with 10mm quality marine grade tinned copper wire, a 50 amp circuit breaker, an Anderson plug kit and all terminals attached. The wiring is protected in a loom tube for neat installation.
Available in popular three and six metre lengths ready for installation these looms are manufactured using quality materials and fittings. Each cable features 10mm marine grade tinned copper wire, quality 50 amp BEP resettable circuit breaker, Anderson plug kit and fixed terminals.
For safety, protection, ease of installation and neatness each loom is supplied encased in black flame retardant corrugated conduit.
Note: For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required (please see related products), allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation.
SKU: Minn Kota 3m Wiring Loom -
12V Accessories, Electrical
Anderson Plugs 50A (115612) – Suitable for Minn Kota Wiring
Anderson Plugs 50A (115612) – Suitable for Minn Kota Wiring
Heavy duty, DC rated two circuit connectors. Feature a self cleaning contact design that resists arcing. Grey plastic housing with silver plated solid copper contacts, spring loaded to resist vibration arcing. Ideal for high load applications such as trailer winches, trolling motors and battery connections. Sold individually. Two required to make a connection.
Features:
BLA Code: 115612
Max.amps: 50
Max. Cable mm²: 8
Base mm: 48×35
Height mm: 16SKU: 115612 -
12V Accessories, Electrical
Minn Kota® Heavy Duty Power Plug and Socket (114274)
Minn Kota® Heavy Duty Power Plug and Socket (114274)
Universal design for two or three wire configuration to suit 12 to 36 volt systems and up to 40 amp current draw. Watertight sealing cap, corrosion resistant, plated brass electrical components. Locks into receptacle to provide a watertight seal.
Features:
BLA Code: 114274
Socket Facia mm: 60×43
Intrusion mm: 45
Mount Screws mm: 4 c/s
Mount Hole mm: 29SKU: 114274 -
Garmin
Minn Kota Quick Release Bracket to suit Riptide Powerdrive and Terrova (603009)
RIPTIDE, POWERDRIVE & RIPTIDE TERROVA QUICK RELEASE BRACKET MODEL RTA 17 (603009) – RRP $179
BLA Code: 603009Allows for easy removal of any Riptide® bow mount, Autopilot motor. The low profile puck design leaves the deck clear when the motor is removed. Includes stainless steel hardware and locking pin. Locking handle can be secured with padlock (not included).
SKU: Minn Kota Quick Release Bracket -
-
Humminbird, Humminbird Transducers
Humminbird HELIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Humminbird, Humminbird TransducersHumminbird HELIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Humminbird HELIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Trolling Motor Mount, MEGA Down Imaging+ 800kHz/455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor
- Compatible with: HELIX 8 G3N Series MEGA DI+ and MEGA SI+, HELIX 9 G3N Series MEGA DI+ and MEGA SI+, HELIX 10 G3N Series MEGA DI+ and MEGA SI+, HELIX 12 G3N Series MEGA DI+ and MEGA SI+.
- Cable Length: 15 Feet
- Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
- Dual Spectrum CHIRP Max Depth: 1200ft (365m)
- MEGA Down Imaging Frequencies – Max Depth: 455kHz: 440-500 kHz – 400ft (122m), 800kHz: 790-850 kHz – 125ft (38m), MEGA DI+: 1075-1150 kHz – 200ft (61m)
- Note: This transducer will not fit Minn Kota trolling motors with less than 80 pounds of thrust as it measures 7.15″ long by 2.3″ wide and will not fit between the prop and the skeg.
- 1-Year Limited Warranty
SKU: 103047 -
Humminbird, Humminbird Transducers
Humminbird HELIX MEGA SI+, DI+, Dual Spectrum CHIRP W/ Temp, Trolling Motor Transducer
Humminbird, Humminbird TransducersHumminbird HELIX MEGA SI+, DI+, Dual Spectrum CHIRP W/ Temp, Trolling Motor Transducer
Humminbird HELIX MEGA SI+, DI+, Dual Spectrum CHIRP W/ Temp, Trolling Motor Transducer
Trolling Motor Mount, MEGA Side Imaging+ 800kHz/455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature
- Compatible with: HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N
- Cable Length: 15 Feet
- Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
- Dual Spectrum CHIRP Max Depth: 1200ft (365m)
- MEGA Side Imaging+ Frequencies – Max Range (side-to-side): 455kHz: 440-500 kHz – 800ft (244m), 800kHz: 790-850 kHz – 250ft (76m), MEGA SI+: 1075-1150 kHz – 400ft (m)
- MEGA Down Imaging+ Frequencies – Max Depth: 455kHz: 440-500 kHz – 400ft (122m), 800kHz: 790-850 kHz – 125ft (38m), MEGA DI+: 1075-1150 kHz – 200ft (61m)
- Note: This transducer will not fit Minn Kota trolling motors with less than 80 pounds of thrust as it measures 8.4″ long by 2.3″ wide and will not fit between the prop and the skeg.
- 1-Year Limited Warranty
SKU: 103049 -
Humminbird, Humminbird Transducers
Humminbird SOLIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Humminbird, Humminbird TransducersHumminbird SOLIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Humminbird SOLIX MEGA DI+, Dual Spectrum CHIRP W/ Temp Trolling Motor Transducer
Trolling Motor Mount, MEGA Down Imaging+ 800kHz/455 kHz and 1.2 MHz and Dual Spectrum CHIRP 2D Sonar with a CHIRP range of 150-220kHz. Includes built-in temperature sensor
- Compatible with: SOLIX 10 CHIRP MEGA DI+ GPS G2, SOLIX 12 CHIRP MEGA DI+ GPS G2, SOLIX 15 CHIRP MEGA DI+ GPS G2.
- Cable Length: 15 Feet
- Dual Spectrum CHIRP Frequencies: Full: 150-220 kHz, Narrow: 180-240 kHz, Wide: 140-200 kHz
- Dual Spectrum CHIRP Max Depth: 1200ft (365m)
- MEGA Down Imaging Frequencies – Max Depth: 455kHz: 440-500 kHz – 400ft (122m), 800kHz: 790-850 kHz – 125ft (38m), MEGA DI+: 1075-1150 kHz – 200ft (61m)
- Note: This transducer will not fit Minn Kota trolling motors with less than 80 pounds of thrust as it measures 7.15″ long by 2.3″ wide and will not fit between the prop and the skeg.
- 1-Year Limited Warranty
SKU: 103051 -
Humminbird, Humminbird Transducers
Humminbird Trolling Motor DualBeam MEGA SI MEGA DI Transducer
Humminbird Trolling Motor DualBeam MEGA SI MEGA DI Transducer
Trolling Motor Mount, MEGA SI, MEGA DI, DualBeam PLUS, 20/60/86/55 degrees, 200/83/455/800 kHz and 1.2 MHz, Includes built-in temperature
- Compatible with: HELIX 12 CHIRP SI GPS G2N, HELIX 10 CHIRP SI GPS G2N, HELIX 9 CHIRP SI GPS G2N,
- Cable Length: 15 Feet
- Note: This transducer will not fit Minn Kota trolling motors with less than 80 pounds of thrust as it measures 8.4″ long by 2.3″ wide and will not fit between the prop and the skeg.
- 1-Year Limited Warranty
SKU: 103263 -
Humminbird, Humminbird Accesories
Humminbird MEGA Trolling Motor Transducer Hardware Kit
Humminbird MEGA Trolling Motor Transducer Hardware Kit
The AD MTM hardware kit adapts a MEGA Side Imaging transom mount transducer for use on the trolling motor, for a secure fit and clear picture.
- Compatible with: XM 9 20 MSI T, HELIX 12 CHIRP SI GPS G2N, HELIX 10 CHIRP SI GPS G2N, HELIX 9 CHIRP SI GPS G2N
- Note: this transducer will not fit Minn Kota motors with less than 80 pounds of thrust.
- 1-Year Limited Warranty
SKU: 103511 -
Humminbird, Humminbird Accesories
Humminbird MEGA SI+ Trolling Motor Adapter Bracket
Humminbird MEGA SI+ Trolling Motor Adapter Bracket
The AD MTM HW MSI is a MEGA Side Imaging+ Trolling Motor transducer adapter bracket that converts a MEGA Side Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor for a low profile fit. This product is compatible with trolling motor lower unit that are 80lb thrust or larger.
- Compatible with: XM 9 HW MSI T, XTM 9 HW MSI T, XM 14 HW MSI T, XTM 14 HW MSI T, HELIX 8 CHIRP MEGA SI+ GPS G3N, HELIX 9 CHIRP MEGA SI+ GPS G3N, HELIX 10 CHIRP MEGA SI+ GPS G3N, HELIX 12 CHIRP MEGA SI+ GPS G3N, SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2
- Note: this transducer will not fit Minn Kota trolling motors with less than 80 pounds of thrust.
- Comes with mounting hardware and interference choke to help eliminate electrical noise from the power cable connected to your Humminbird fish finder.
- 1-Year Limited Warranty
SKU: 103056 -
Humminbird, Humminbird Transducers
Humminbird MEGA 360 Imaging – Ultrex
Humminbird MEGA 360 Imaging – Ultrex
The MEGA 360 Imaging – Ultrex transducer provides a 360-degree, detail-rich view around your boat. Designed to mount to the Minn Kota® Ultrex™, this transducer provides uninterrupted use of your Ultrex motor while using MEGA 360 Imaging, even while in Spot-Lock™. So keep fishing in wind, waves and nasty weather, and we’ll still deliver the MEGA Imaging all around you for versatility in your fishing.
FEATURES
- Compatible with the following HELIX models: HELIX 15 MEGA SI+ GPS G4N, HELIX 15 MEGA DI+ GPS G4N, HELIX 12 MEGA SI+ GPS G4N, HELIX 12 MEGA SI+ GPS G3N, HELIX 12 MEGA DI+ GPS G4N, HELIX 12 MEGA DI+ GPS G3N, HELIX 10 MEGA SI+ GPS G4N, HELIX 10 MEGA SI+ GPS G3N, HELIX 10 MEGA DI+ GPS G4N, HELIX 10 MEGA DI+ GPS G3N, HELIX 9 MEGA SI+ GPS G4N, HELIX 9 MEGA SI+ GPS G3N, HELIX 9 MEGA DI+ GPS G4N, HELIX 9 MEGA DI+ GPS G3N, HELIX 8 CHIRP MEGA SI+ GPS G4N, HELIX 8 MEGA SI+ GPS G3N
- Compatible with the following SOLIX models: SOLIX 10 CHIRP MEGA SI+ GPS G3, SOLIX 10 CHIRP MEGA DI+ GPS G2, SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G3, SOLIX 12 CHIRP MEGA DI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G3, SOLIX 15 CHIRP MEGA DI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2
- For use only on Minn Kota’s Ultrex bow-mount trolling motor
- What’s Included: Ultrex bow-mount MEGA 360 Imaging transducer with attached power cable and transducer cable, with 10′ SOLIX transducer cable, 10′ HELIX transducer adapter cable, 10′ MEGA 360 power cable and an easy to mount MEGA 360 Imaging – Ultrex mounting bracket. (Minn Kota Ultrex trolling motor sold separately).
- The high-frequency beam of MEGA Imaging CHIRPs across the megahertz range to reveal the world below in picture-like detail all the way around your boat.
- Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns.
- Pick from two operation modes for this transducer; MEGA 360 Imaging or Side Imaging. This allows you to view a MEGA 360 Imaging view or use this transducer as a MEGA Side Imaging sonar source by selecting the Side Imaging operation mode.
- Mark waypoints directly on your MEGA 360 Imaging screen and watch them update as your boat position changes, making it easy to find and then cast to fish and structure.
- Utilize optional range rings to show you the distance of targets from your boat, for a better understanding of exactly where the fish are.
- View MEGA 360 Imaging alongside your choice of multiple sonar and map technologies for a complete understanding of your surroundings.
- MEGA 360 Imaging allows you to customize sweep speed, viewing area, display information, sonar zoom and color palette to your specific fishing situation and preferences.
- Once connected to a compatible HELIX G3N unit with MEGA Imaging+ or SOLIX G2 unit, MEGA 360 Imaging view can be shared with All SOLIX models, and all HELIX G2N and G3N models when connected via an Ethernet network.
- Transducer shaft length: 39 inches
- Weight 12 Lbs.
- Mounting Bracket material: Anodized Aluminum
- 1-Year Limited Warranty
Operations Manual
How to use Humminbird MEGA360 – System overview
SKU: 103205 -
Humminbird, Humminbird Transducers
Humminbird MEGA 360 Imaging – Fortrex
Humminbird MEGA 360 Imaging – Fortrex
Turn intel into action. This transducer shows you a 360 degree, detail-rich view around your boat. Designed to mount to Minn Kota® Fortrex or Maxxum motors, this transducer provides uninterrupted use of your Fortrex motor while using MEGA 360 Imaging – Fortrex is compatible with both Minn Kota Fortrex and Maxxum® trolling motors.
FEATURES
- Compatible with the following HELIX models: HELIX 15 MEGA SI+ GPS G4N, HELIX 15 MEGA DI+ GPS G4N, HELIX 12 MEGA SI+ GPS G4N, HELIX 12 MEGA SI+ GPS G3N, HELIX 12 MEGA DI+ GPS G4N, HELIX 12 MEGA DI+ GPS G3N, HELIX 10 MEGA SI+ GPS G4N, HELIX 10 MEGA SI+ GPS G3N, HELIX 10 MEGA DI+ GPS G4N, HELIX 10 MEGA DI+ GPS G3N, HELIX 9 MEGA SI+ GPS G4N, HELIX 9 MEGA SI+ GPS G3N, HELIX 9 MEGA DI+ GPS G4N, HELIX 9 MEGA DI+ GPS G3N, HELIX 8 CHIRP MEGA SI+ GPS G4N, HELIX 8 MEGA SI+ GPS G3N
- Compatible with the following SOLIX models: SOLIX 10 CHIRP MEGA SI+ GPS G3, SOLIX 10 CHIRP MEGA DI+ GPS G2, SOLIX 10 CHIRP MEGA SI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G3, SOLIX 12 CHIRP MEGA DI+ GPS G2, SOLIX 12 CHIRP MEGA SI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G3, SOLIX 15 CHIRP MEGA DI+ GPS G2, SOLIX 15 CHIRP MEGA SI+ GPS G2
- For use only on Minn Kota’s Fortrex bow-mount trolling motor
- What’s Included: Fortrex bow-mount MEGA 360 Imaging transducer with attached power cable and transducer cable, with 10′ SOLIX transducer cable, 10′ HELIX transducer adapter cable, 10′ MEGA 360 power cable and an easy to mount MEGA 360 Imaging – Fortrex mounting bracket. (Minn Kota Fortrex trolling motor sold separately).
- The high-frequency beam of MEGA Imaging CHIRPs across the megahertz range to reveal the world below in picture-like detail all the way around your boat.
- Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns.
- Pick from two operation modes for this transducer; MEGA 360 Imaging or Side Imaging. This allows you to view a MEGA 360 Imaging view or use this transducer as a MEGA Side Imaging sonar source by selecting the Side Imaging operation mode.
- Mark waypoints directly on your MEGA 360 Imaging screen and watch them update as your boat position changes, making it easy to find and then cast to fish and structure.
- Utilize optional range rings to show you the distance of targets from your boat, for a better understanding of exactly where the fish are.
- View MEGA 360 Imaging alongside your choice of multiple sonar and map technologies for a complete understanding of your surroundings.
- MEGA 360 Imaging allows you to customize sweep speed, viewing area, display information, sonar zoom and color palette to your specific fishing situation and preferences.
- Once connected to a compatible HELIX G3N unit with MEGA Imaging+ or SOLIX G2 unit, MEGA 360 Imaging view can be shared with All SOLIX models, and all HELIX G2N and G3N models when connected via an Ethernet network.
- Transducer shaft length: 27 inches
- Weight 10 lbs
- Mounting Bracket material: Anodized Aluminum
- 1-Year Limited Warranty
Operations Manual
How to use Humminbird MEGA360 – System overview
SKU: 103207 -
Humminbird, Humminbird Accesories
Humminbird Ultrex MEGA 360 Hardware Kit
Humminbird Ultrex MEGA 360 Hardware Kit
The Ultrex MEGA 360 Hardware Kit provides the components needed to mount a MEGA 360 Imaging accessory transducer on a Minn Kota Ultrex™ bow-mount trolling motor.
FEATURES
- This kit contains the bracket and mounting hardware for installing a MEGA 360 Imaging transducer on a Minn Kota® Ultrex trolling motor
- Compatible with the following MEGA 360 Imaging shaft/pod assemblies: MEGA 360 Imaging – No Mount, MEGA 360 Imaging – Universal and MEGA 360 Imaging – Ultrex
- This kit does not include MEGA 360 Imaging transducer pod or shaft.
- 1-Year Limited Warranty
SKU: 103203 -
Humminbird, Humminbird Accesories
Humminbird MEGA 360 & 2D/MDI 14-Pin Y Cable
Humminbird MEGA 360 & 2D/MDI 14-Pin Y Cable
This Y cable allows for the connection of a MEGA 360 Imaging transducer and a 14-pin 2D / MDI transducer (including Built-in MEGA Imaging) to the same compatible Humminbird fish finder.
- Compatible with: MEGA 360, SOLIX 15 MSI G2, SOLIX 15 MDI G2, SOLIX 12 MSI G2, SOLIX 12 MDI G2, SOLIX 10 MSI G2, SOLIX 10 MDI G2
- Cable Length: 1 foot
- Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter.
- For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin 2D /MDI transducer.
- If this cable is being used with a HELIX fish finder, then the #720109-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable.
- Compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors
- 30″ (76 cm) cable on Dual Sprectrum CHIRP side of cable
- 10′ (3 m) cable on the MEGA 360 side
- Waterproof, screw-on, 14-pin connectors
- 1-Year Limited Warranty
SKU: 103659