Garmin 11mm Split Connector
Route cables without having to drill large holes in your vessel with this 11 mm split connector.
Route cables without having to drill large holes in your vessel with this 11 mm split connector.
Weight | 0.02 kg |
---|
See fish and structure in maximum detail when you pick your display colour, your location and your sonar for your day on the water with the STRIKER Vivid 4cv fishfinder with transducer.
The sonar colour you pick says a lot about your fishing style. Good thing there are 7 new vivid options.
What a view. Use the included transducer to get CHIRP traditional and ClearVü sonars.
Never lose a hot spot again. Use waypoint marking to find your way back.
What’s under the water’s surface looks pretty good as 1-foot contours, just saying.
Garmin Stainless Steel Transducer Spray Shield [Garmin Part Number: 010-01055-00]
The Garmin spray shield is designed to reduce excess water spray from transducers when the vessel is running at high speeds. Can be retro fitted to a wide range of common Garmin transom mounted transducers. The plate is simply fitted between the plastic transducer housing and the transom mount bracket. Supplied complete with stainless steel mount fixtures and washers.
COMPATABLE UNITS & TRANSDUCERS:
* echoMAP™ 45dv
* echoMAP™ 55dv
* echoMAP™ 75dv
* echoMAP™ 75sv
* echoMAP™ 95sv
* echoMAP™ CHIRP 45dv
* echoMAP™ CHIRP 55dv
* echoMAP™ CHIRP 75dv
* echoMAP™ CHIRP 75sv
* echoMAP™ CHIRP 95sv
* Garmin GT20-TM – Transom Mount DownVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (8-pin)
* Garmin GT21-TM – Transom Mount DownVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (8-pin)
* Garmin GT30-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Scanning Transducer with Temp (12-pin)
* Garmin GT40-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (12-pin)
* Garmin GT41-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (50/200 kHz) Transducer with Temp (12-pin)
* Garmin GT50M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 455/800 kHz) Traditional 300 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-pin)
* Garmin GT51M-TM – Transom Mount DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducer with Temp (12-Pin)
*Specifications from suppliers’ information.
Minn Kota 3m Wiring Loom/Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
BLA Code: 602996
Wiring Harness for Electric Motor to Suit Minn Kota & Other Electric Motors
CADCO wiring looms are available in 3m (this listing) and 6m lengths and are made with 10mm quality marine grade tinned copper wire, a 50 amp circuit breaker, an Anderson plug kit and all terminals attached. The wiring is protected in a loom tube for neat installation.
Available in popular three and six metre lengths ready for installation these looms are manufactured using quality materials and fittings. Each cable features 10mm marine grade tinned copper wire, quality 50 amp BEP resettable circuit breaker, Anderson plug kit and fixed terminals.
For safety, protection, ease of installation and neatness each loom is supplied encased in black flame retardant corrugated conduit.
Note: For the installation of 24 volt motors the purchase of one 113676 300mm flexible terminal link is required (please see related products), allowing the connection from one batteries positive to the others negative. Full instructions with simple to follow pictures is included for easy installation.
This 24-inch high-definition radar dome pairs ease of use with advanced features typically found on open arrays for enhanced situational awareness.
This 24-inch radar dome is easy to use and has options to make installation simple. What could be better?
It packs the power and echo definition you need, at all ranges.
When weather and sea conditions shift, the gain and sea filter do too — automatically.
See what’s close and far away with dual-range operation.
This 24-inch dome radar delivers 4-kW transmit power and clear echo definition at all ranges. It has a maximum range of 48 nautical miles (88 km) and 48- or 24-RPM rotation speeds for fast screen refreshes.
GMR™ 24 xHD features 8-bit true colour high resolution for outstanding target separation with less screen clutter on your chartplotter.
This radar doesn’t have any complex user settings to deal with, so it’s easy to install and start using.
Gain levels automatically adjust to optimum settings for harbours, near shore and offshore in open waters.
Gain automatically adjusts sea clutter for calm, medium and rough sea conditions.
This feature enables the fully independent split-screen display of far and close radar views.
You have the option to protect areas behind the radar from being radiated while providing full forward-looking radar capability. This also makes installation more flexible.
Overlay radar images onto your chartplotter’s map page. You can add an optional autopilot or heading sensor (sold separately) for best results.
GMR™ 24 xHD provides MARPA target tracking when combined with a multifunction display and heading sensor (sold separately).