Xsonic Airmar TM260 – Traditional/CW Transom Mount Transducer

Availability:

Out of stock


Price Match

$1,629.00

Out of stock

Compare

Airmar TM260 – Traditional/CW Transom Mount Transducer

The Airmar TM260 is a  1kW transducer that comes with a rugged stainless-steel mounting bracket that is easy to install and has a streamlined shape. The performance of Airmar’s “1 kW, 260 family” of transducers is legendary. The combination of power and sensitivity has made this the high-performing transducer of choice with conventional fishfinders. Operating at 50 and 200 kHz, the narrow, 6° beam at 200 kHz provides excellent target resolution and crisp images of fish holding tight to wrecks and reefs. The 50 kHz is excellent at deep-water detection, and the wide, 19° beam yields broad coverage under the boat.

The new Airmar TM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line 1kW transom-mount brings crystal clear imaging to any of today’s fishfinders. The large 200 kHz element and the seven-element 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The Airmar TM260’s high-performance mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH).

Features

  • Depth and fast-response water-temperature sensing
  • 1 kW of power
  • Dual-frequency elements:
    • 50 kHz with a 19° beamwidth for depth performance to 800 m (2600′)
    • 200 kHz with a 6° beamwidth for depth performance to 294 m (1000′)
  • Available with a diplexer for single-transmission-line fishfinders and without a diplexer for dual-transmission-line fishfinders
  • Transom mount for installation on outboard or inboard/outboard powered boats
  • Stainless steel kick-up bracket locks in the “up” position and will not damage the transom
  • SEALCAST, seamless, urethane housing for long life in the water
  • Also available as bronze thru-hull (B260), stainless steel thru-hull (SS260), and in-hull (M260) mounts
  • Patented Xducer ID® technology

Traditional Frequency Transducers

Traditional frequency transducers continue to be popular choices for angler’s who like the simplicity of fewer frequencies or have a non-Chirp capable sounder.  Our Traditional (CW) models range in power from 300 watts to 1kW and typically are either 200 kHz, 50 KHz or a combination of the two.  Built with the highest quality construction, Airmar traditional frequency transducers will allow your fishfinder to deliver excellent deep-water performance, great bottom structure detail, and fish targets.

Benefits of Transom Mount Transducers

Transom models are best suited for small and trailered vessels where a thru-hull installation is not practical. Perfect for freshwater boat styles and centre consoles. Simple to install and ideal for small trailered vessels where a thru-hull may interfere with loading.
• Simple installation on the transom of the boat
• Great performance at boat speeds below 30 knots
• Easy maintenance and low-cost replacement

Why does Frequency Matter?

Selecting the best frequency for your specific application is very important. The good news is that once you know what frequency will work best for the type of fishing you do, there’s an AIRMAR transducer designed to maximize the performance of your sounder.
AIRMAR Chirp transducers are available in various frequency combinations:

Dual Band:

  • Low/High (LH)
  • Low/Medium (LM)
  • Low/High Wide (LHW)
  • Low Wide/Medium (LWM)
Single Band:

  • Low
  • Medium
  • High
  • HighWide

Low Frequency = Greater Depth (ex. 42-65 kHz)

• Sound waves will not present as clear a picture of the bottom on the display but will sound down in very deep areas where high-frequency sound waves cannot reach
• Provides greater depth range, wider beamwidth, and ultimately more coverage under the boat
• Chirp signal processing technology used with AIRMAR broadband, Chirp-ready transducers provide more detail at greater depths and are less susceptible to noise
• Great for operating at high boat speeds

High Frequency = Greater Detail (ex. 130-210 kHz)
• More sensitive to small targets and will send back detailed information which will display as crisp, high-resolution images on the echosounder screen
• Best for shallower water and is popular with anglers fishing at depths less than 1500 feet

Medium Frequency = The Best of Both Worlds (ex. 80-130 kHz)
• Provides the ability to sound deeper than the high frequency, along with better resolution than the low frequency
• Wider beam than the high frequency, achieving more coverage under the boat and greater opportunity to find fish
• Clear images at higher boat speeds

Brochure

SKU: 000-13904-001 Category: Tags: , , , ,
Airmar p66 to suit which brand

, , ,

Mounting Style: Transom
Common Use: Leisure/Yachting, Fishing
Functions: Depth, Temperature
Power Rating: 1 kW
Housing: Urethane/Stainless Bracket
Max Deadrise: Up to 28°
Max Deadrise Angle: 28°
Single or Dual Frequency: Conventional Dual Frequency
Transom Angle: up to 28°
Max Vessel LOA: 10 m (33′) and above
Weight: 4 kg (8.9 lb.)
Tilted Element: No
Retractable housing: No
Max Depth: Low frequency- 800 m (2600′), High frequency- 294 m (1000)
Acoustic Window: Urethane
Conventional Beam: 19°/7°

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Xsonic Airmar TM260 – Traditional/CW Transom Mount Transducer”

There are no reviews yet.

SHOPPING CART

close