Sounders and Fishfinders
Showing 1–30 of 46 results
-
Sounders and Fishfinders
Furuno FCV-588 8.4in Sounder/Fishfinder (Head Only) – In Stock Now
PER BOAT SHOW SALES ON NOW!
Furuno FCV-588 8.4″ Sounder/Fishfinder (Head Only) – RRP $2750
Equipped with Furuno’s latest technology, the Bottom Discrimination Function – Analyze bottom structure! With the FCV-588, Furuno is introducing the new Fish Finder Technology called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder, without the need to change out your narrowband transducer or purchase expensive broadband transducers (transducers sold separately).
FEATURES:
* Bottom Discrimination Function:
The FCV-588’s Bottom Discrimination feature enables the fish finder to indicate if the major component of the bottom is rocks, gravel, sand, mud. The Bottom Discrimination feature provides you with valuable information to locate rich fishing grounds, while boosting your catch of the day.* Graphic mode:
The standard graphic display mode shows the most probable bottom composition by graphic or four colors.* Probability mode.
The probability display mode shows the most probable bottom composition in graph form.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m – 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) Set the transducer parallel to the bottom of the craft.
4) To show a consistent display of the actual bottom, set the range display of the fish finder screen to “auto”.
5) Enter the ship’s draft value.
6) Use a ship speed of 10 kn or less.
7) In some instances, bottom component indicated on the FCV-588 may differ from its actual bottom structure.
(Please read the operation manual carefully before using this feature.)* NEW RezBoost™:
Rezboost™ is a revolutionary new technology utilizing FURUNO’s advanced digital signal processing to provide fantastic resolution without having to change your transducer.
Conventional Signal Processing RezBoost™ Signal Processing The FCV-588 display has a built-in Fish Finder that is dual-frequency (50/200kHz), and has a 600W/1kW power output. Furuno has introduced a new, proprietary Fish Finder technology, called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder^, without the need to change out your narrowband transducer^, or purchase an expensive broadband transducer.
^Please note: RezBoost™ performance may vary depending on depth, range and signal frequency used. To check if your transducer supports the “Enhanced Mode”, please contact us. In-hull mounted transducers are not compatible with RezBoost™ technology.* ACCU-FISH™ identifies individual fish with size and fish mark function:
Recognizes individual or multiple fish instantaneously ACCU-FISH™ is a revolutionary fish size assessment function of the FCV-588. In order to assess individual fish size, the echo strength from the fish needs to be computed and turned into fish size display on the screen. It can detect the fish size of 10 to 199 cm, in the depth of 2 to 100 m. Circles and fish size are displayed on fish echoes. When in dual frequencies mode, you can set the mark displayed on both or either frequency screen.* Displaying fish marks:
The fish mark can be utilized to display on individual fish echoes when detected. It helps beginners to identify the fish targets on the display for a more fun fishing experience. Fish mark is selectable from two types of fish symbol, circle and square. The fish symbol, displayed in two different sizes (Large: over 50 cm, Small: 10 to 49 cm), is a great help for anglers to identify fish targets. Circle and square indentify targets without hiding fish echo.* White Line function distinguishes fish from bottom:
The white line function helps you distinguish bottom fish from the bottom by changing the strongest signal color to white. This function is not only useful discriminating bottom fish but is also valuable for judging fish school density. The setting range is 0%-100%, in intervals of 1%. The higher the value the thicker the line.*Configurable Alarm function (depth, fish echoes, etc.):
When fish echoes come in the area which you set above the bottom, beeps sound and the alarm icon flashes at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set by every and each condition, including water depth, target depth, water temp, bottom component, etc.* Post-Processing Gain Control:
With conventional gain controls, changes are made for new echoes only when a change in the gain setting is applied. With the FCV-588’s Post-Processing Gain Control, changes in the gain setting are applied to new echoes as well as all of the echoes already on the screen. Because the changes are applied to both new and existing returns, you will be able to quickly and easily find the right gain setting for your conditions.* Share and display information on a chartplotter:
Required connection to chart plotter.* Bright LCD for excellent in sunlight viewability:
Bright 800 cd/m2 LCD gives excellent readability even in bright sunlight.* Clear visibility even when wearing polarized sunglasses.
* Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
SPECIFICATIONS:
DISPLAY
* Display unit: 8.4″ TFT color LCD
* Pixel number: 480 x 640
FISH FINDER
* Frequency: 50 and 200 kHz
* Transducer: 600 W/1 kW* (The FCV-588 can be connected with the transducers of 1 kw output power, when interfaced with the Matching Box MB-1100).
* Range Scale: 2-1200 m
* Pulselength & PRR: 0.1-3 ms, Max 3,000 pulse/min
* Display Mode: Single frequency (50 or 200 kHz), Dual-frequency, Zoom, Nav data, A-scope, Marker zoom, Bottom zoom, Bottom-lock, Bottom Discrimination, ACCU-FISH™
OTHERS
* Waterproofing: IP56
* Power Supply: 12-24 VDC : 1.2 – 0.6 A
* Size (mm): 270 (H) x 233 (W) x 158 (D)
* Weight Bracket Mount: 2.3 kg
* Flush Mount: 1.6 kgWHAT’S IN THE BOX:
* Furuno FCV-588 Head Unit
* Power Cable
* Swivel Mounting Bracket
* Instruction ManualSKU: 196588 -
Sounder-GPS Combos, Sounders and Fishfinders
Furuno FCV-588 8.4in Sounder/Fishfinder with Airmar P66 50/200kHz Transducer
Sounder-GPS Combos, Sounders and FishfindersFuruno FCV-588 8.4in Sounder/Fishfinder with Airmar P66 50/200kHz Transducer
Furuno FCV-588 8.4in Sounder/Fishfinder with Airmar P66 50/200kHz Transom Mount Transducer – RRP $2893
Equipped with Furuno’s latest technology, the Bottom Discrimination Function – Analyze bottom structure! With the FCV-588, Furuno is introducing the new Fish Finder Technology called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder, without the need to change out your narrowband transducer or purchase expensive broadband transducers (Airmar P66 50/200kHz 600W Transom Mount Transducer Included).
FEATURES:
* Bottom Discrimination Function:
The FCV-588’s Bottom Discrimination feature enables the fish finder to indicate if the major component of the bottom is rocks, gravel, sand, mud. The Bottom Discrimination feature provides you with valuable information to locate rich fishing grounds, while boosting your catch of the day.* Graphic mode:
The standard graphic display mode shows the most probable bottom composition by graphic or four colors.* Probability mode.
The probability display mode shows the most probable bottom composition in graph form.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m – 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) Set the transducer parallel to the bottom of the craft.
4) To show a consistent display of the actual bottom, set the range display of the fish finder screen to “auto”.
5) Enter the ship’s draft value.
6) Use a ship speed of 10 kn or less.
7) In some instances, bottom component indicated on the FCV-588 may differ from its actual bottom structure.
(Please read the operation manual carefully before using this feature.)* NEW RezBoost™:
Rezboost™ is a revolutionary new technology utilizing FURUNO’s advanced digital signal processing to provide fantastic resolution without having to change your transducer. Conventional Signal Processing RezBoost™ Signal Processing The FCV-588 display has a built-in Fish Finder that is dual-frequency (50/200kHz), and has a 600W/1kW power output. Furuno has introduced a new, proprietary Fish Finder technology, called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder^, without the need to change out your narrowband transducer^, or purchase an expensive broadband transducer.
^Please note: RezBoost™ performance may vary depending on depth, range and signal frequency used. To check if your transducer supports the “Enhanced Mode”, please contact us – the Airmar P66 Transducer is compatible with RezBoost. In-hull mounted transducers are not compatible with RezBoost™ technology.* ACCU-FISH™ identifies individual fish with size and fish mark function:
Recognizes individual or multiple fish instantaneously ACCU-FISH™ is a revolutionary fish size assessment function of the FCV-588. In order to assess individual fish size, the echo strength from the fish needs to be computed and turned into fish size display on the screen. It can detect the fish size of 10 to 199 cm, in the depth of 2 to 100 m. Circles and fish size are displayed on fish echoes. When in dual frequencies mode, you can set the mark displayed on both or either frequency screen.* Displaying fish marks:
The fish mark can be utilized to display on individual fish echoes when detected. It helps beginners to identify the fish targets on the display for a more fun fishing experience. Fish mark is selectable from two types of fish symbol, circle and square. The fish symbol, displayed in two different sizes (Large: over 50 cm, Small: 10 to 49 cm), is a great help for anglers to identify fish targets. Circle and square indentify targets without hiding fish echo.* White Line function distinguishes fish from bottom:
The white line function helps you distinguish bottom fish from the bottom by changing the strongest signal color to white. This function is not only useful discriminating bottom fish but is also valuable for judging fish school density. The setting range is 0%-100%, in intervals of 1%. The higher the value the thicker the line.*Configurable Alarm function (depth, fish echoes, etc.):
When fish echoes come in the area which you set above the bottom, beeps sound and the alarm icon flashes at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set by every and each condition, including water depth, target depth, water temp, bottom component, etc.* Post-Processing Gain Control:
With conventional gain controls, changes are made for new echoes only when a change in the gain setting is applied. With the FCV-588’s Post-Processing Gain Control, changes in the gain setting are applied to new echoes as well as all of the echoes already on the screen. Because the changes are applied to both new and existing returns, you will be able to quickly and easily find the right gain setting for your conditions.* Share and display information on a chartplotter:
Required connection to chart plotter.* Bright LCD for excellent in sunlight viewability:
Bright 800 cd/m2 LCD gives excellent readability even in bright sunlight.* Clear visibility even when wearing polarized sunglasses.
* Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
SPECIFICATIONS:
DISPLAY
* Display unit: 8.4″ TFT color LCD
* Pixel number: 480 x 640
FISH FINDER
* Frequency: 50 and 200 kHz
* Transducer: 600 W/1 kW* (The FCV-588 can be connected with the transducers of 1 kw output power, when interfaced with the Matching Box MB-1100).
* Range Scale: 2-1200 m
* Pulselength & PRR: 0.1-3 ms, Max 3,000 pulse/min
* Display Mode: Single frequency (50 or 200 kHz), Dual-frequency, Zoom, Nav data, A-scope, Marker zoom, Bottom zoom, Bottom-lock, Bottom Discrimination, ACCU-FISH™
OTHERS
* Waterproofing: IP56
* Power Supply: 12-24 VDC : 1.2 – 0.6 A
* Size (mm): 270 (H) x 233 (W) x 158 (D)
* Weight Bracket Mount: 2.3 kg
* Flush Mount: 1.6 kgWHAT’S IN THE BOX:
* Furuno FCV-588 Head Unit
* Power Cable
* Swivel Mounting Bracket
* Instruction Manual
* Airmar P66 50/200kHz 600W Transom Mount TransducerSKU: 196588+193461 -
Sounders and Fishfinders
Furuno FCV-628 5.7″ Sounder/Fishfinder (Head Only) – IN STOCK NOW
### FURUNO SUPER SUMMER SALE – ONLINE ONLY DEAL – WHILE STOCKS LAST – MUST END 31/01/18 ###
Furuno FCV-628 5.7″ Sounder/Fishfinder (Head Only) – RRP $1529
Equipped with Furuno’s latest technology, the Bottom Discrimination Function – Analyze bottom structure! With the FCV-628, Furuno is introducing the new Fish Finder Technology called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder, without the need to change out your narrowband transducer or purchase expensive broadband transducers (transducers sold separately).
FEATURES:
* Bottom Discrimination Function:
The FCV-628’s Bottom Discrimination feature enables the fish finder to indicate if the major component of the bottom is rocks, gravel, sand, mud. The Bottom Discrimination feature provides you with valuable information to locate rich fishing grounds, while boosting your catch of the day.* Graphic mode:
The standard graphic display mode shows the most probable bottom composition by graphic or four colors.* Probability mode.
The probability display mode shows the most probable bottom composition in graph form.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m – 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) Set the transducer parallel to the bottom of the craft.
4) To show a consistent display of the actual bottom, set the range display of the fish finder screen to “auto”.
5) Enter the ship’s draft value.
6) Use a ship speed of 10 kn or less.
7) In some instances, bottom component indicated on the FCV-628 may differ from its actual bottom structure.
(Please read the operation manual carefully before using this feature.)* NEW RezBoost™:
Rezboost™ is a revolutionary new technology utilizing FURUNO’s advanced digital signal processing to provide fantastic resolution without having to change your transducer. Conventional Signal Processing RezBoost™ Signal Processing The FCV-628 display has a built-in Fish Finder that is dual-frequency (50/200kHz), and has a 600W power output. Furuno has introduced a new, proprietary Fish Finder technology, called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder^, without the need to change out your narrowband transducer^, or purchase an expensive broadband transducer.
^Please note: RezBoost™ performance may vary depending on depth, range and signal frequency used. To check if your transducer supports the “Enhanced Mode”, please contact us. In-hull mounted transducers are not compatible with RezBoost™ technology.* ACCU-FISH™ identifies individual fish with size and fish mark function:
Recognizes individual or multiple fish instantaneously ACCU-FISH™ is a revolutionary fish size assessment function of the FCV-628. In order to assess individual fish size, the echo strength from the fish needs to be computed and turned into fish size display on the screen. It can detect the fish size of 10 to 199 cm, in the depth of 2 to 100 m. Circles and fish size are displayed on fish echoes. When in dual frequencies mode, you can set the mark displayed on both or either frequency screen.* Displaying fish marks:
The fish mark can be utilized to display on individual fish echoes when detected. It helps beginners to identify the fish targets on the display for a more fun fishing experience. Fish mark is selectable from two types of fish symbol, circle and square. The fish symbol, displayed in two different sizes (Large: over 50 cm, Small: 10 to 49 cm), is a great help for anglers to identify fish targets. Circle and square indentify targets without hiding fish echo.* White Line function distinguishes fish from bottom:
The white line function helps you distinguish bottom fish from the bottom by changing the strongest signal color to white. This function is not only useful discriminating bottom fish but is also valuable for judging fish school density. The setting range is 0%-100%, in intervals of 1%. The higher the value the thicker the line.*Configurable Alarm function (depth, fish echoes, etc.):
When fish echoes come in the area which you set above the bottom, beeps sound and the alarm icon flashes at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set by every and each condition, including water depth, target depth, water temp, bottom component, etc.* Post-Processing Gain Control:
With conventional gain controls, changes are made for new echoes only when a change in the gain setting is applied. With the FCV-628’s Post-Processing Gain Control, changes in the gain setting are applied to new echoes as well as all of the echoes already on the screen. Because the changes are applied to both new and existing returns, you will be able to quickly and easily find the right gain setting for your conditions.* Share and display information on a chartplotter:
Required connection to chart plotter.* Clear visibility even when wearing polarized sunglasses.
* Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
SPECIFICATIONS:
DISPLAY
* Display unit: 5.7″ TFT color LCD
* Pixel number: 640 x 480
FISH FINDER
* Frequency: 50 and 200 kHz
* Transducer: 600 W (cannot do 1kW)
* Range Scale: 2-1200 m
* Pulselength & PRR: 0.1-3 ms, Max 3,000 pulse/min
* Display Mode: Single frequency (50 or 200 kHz), Dual-frequency, Zoom, Nav data, A-scope, Marker zoom, Bottom zoom, Bottom-lock, Bottom Discrimination, ACCU-FISH™
OTHERS
* Waterproofing: IP55
* Power Supply: 12-24 VDC : 1.2 – 0.6 A
* Size (mm): 207 (H) x 170 (W) x 132 (D)
* Weight Bracket Mount: 1.3 kgWHAT’S IN THE BOX:
* Furuno FCV-628 Head Unit
* Power Cable
* Swivel Mounting Bracket
* Instruction ManualSKU: 196628 -
Sounder-GPS Combos, Sounders and Fishfinders
Furuno FCV-628 5.7″ Sounder/Fishfinder with Airmar P66 50/200kHz Transducer – IN STOCK NOW
Sounder-GPS Combos, Sounders and FishfindersFuruno FCV-628 5.7″ Sounder/Fishfinder with Airmar P66 50/200kHz Transducer – IN STOCK NOW
Furuno FCV-628 5.7″ Sounder/Fishfinder with Airmar P66 50/200kHz Transom Mount Transducer – RRP $1672
Equipped with Furuno’s latest technology, the Bottom Discrimination Function – Analyze bottom structure! With the FCV-628, Furuno is introducing the new Fish Finder Technology called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder, without the need to change out your narrowband transducer or purchase expensive broadband transducers (Airmar P66 50/200kHz 600W Transom Mount Transducer Included).
FEATURES:
* Bottom Discrimination Function:
The FCV-628’s Bottom Discrimination feature enables the fish finder to indicate if the major component of the bottom is rocks, gravel, sand, mud. The Bottom Discrimination feature provides you with valuable information to locate rich fishing grounds, while boosting your catch of the day.* Graphic mode:
The standard graphic display mode shows the most probable bottom composition by graphic or four colors.* Probability mode.
The probability display mode shows the most probable bottom composition in graph form.
Please keep the following in mind when using the Bottom Discrimination Sounder:
1) Use at a depth of 5 m – 100 m.
2) Use transducer in transom mount or thru-hull mount.
3) Set the transducer parallel to the bottom of the craft.
4) To show a consistent display of the actual bottom, set the range display of the fish finder screen to “auto”.
5) Enter the ship’s draft value.
6) Use a ship speed of 10 kn or less.
7) In some instances, bottom component indicated on the FCV-588 may differ from its actual bottom structure.
(Please read the operation manual carefully before using this feature.)* NEW RezBoost™:
Rezboost™ is a revolutionary new technology utilizing FURUNO’s advanced digital signal processing to provide fantastic resolution without having to change your transducer. Conventional Signal Processing RezBoost™ Signal Processing The FCV-628 display has a built-in Fish Finder that is dual-frequency (50/200kHz), and has a 600W power output. Furuno has introduced a new, proprietary Fish Finder technology, called RezBoost™. RezBoost™ is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fish targets and images that are up to 8 times sharper than a conventional Fish Finder^, without the need to change out your narrowband transducer^, or purchase an expensive broadband transducer.
^Please note: RezBoost™ performance may vary depending on depth, range and signal frequency used. To check if your transducer supports the “Enhanced Mode”, please contact us – the Airmar P66 Transducer is compatible with RezBoost. In-hull mounted transducers are not compatible with RezBoost™ technology.* ACCU-FISH™ identifies individual fish with size and fish mark function:
Recognizes individual or multiple fish instantaneously ACCU-FISH™ is a revolutionary fish size assessment function of the FCV-628. In order to assess individual fish size, the echo strength from the fish needs to be computed and turned into fish size display on the screen. It can detect the fish size of 10 to 199 cm, in the depth of 2 to 100 m. Circles and fish size are displayed on fish echoes. When in dual frequencies mode, you can set the mark displayed on both or either frequency screen.* Displaying fish marks:
The fish mark can be utilized to display on individual fish echoes when detected. It helps beginners to identify the fish targets on the display for a more fun fishing experience. Fish mark is selectable from two types of fish symbol, circle and square. The fish symbol, displayed in two different sizes (Large: over 50 cm, Small: 10 to 49 cm), is a great help for anglers to identify fish targets. Circle and square indentify targets without hiding fish echo.* White Line function distinguishes fish from bottom:
The white line function helps you distinguish bottom fish from the bottom by changing the strongest signal color to white. This function is not only useful discriminating bottom fish but is also valuable for judging fish school density. The setting range is 0%-100%, in intervals of 1%. The higher the value the thicker the line.*Configurable Alarm function (depth, fish echoes, etc.):
When fish echoes come in the area which you set above the bottom, beeps sound and the alarm icon flashes at the top right corner of the screen. Furthermore, an integrated alarm setting is also available that can be set by every and each condition, including water depth, target depth, water temp, bottom component, etc.* Post-Processing Gain Control:
With conventional gain controls, changes are made for new echoes only when a change in the gain setting is applied. With the FCV-588’s Post-Processing Gain Control, changes in the gain setting are applied to new echoes as well as all of the echoes already on the screen. Because the changes are applied to both new and existing returns, you will be able to quickly and easily find the right gain setting for your conditions.* Share and display information on a chartplotter:
Required connection to chart plotter.* Clear visibility even when wearing polarized sunglasses.
* Fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range)
SPECIFICATIONS:
DISPLAY
* Display unit: 5.7″ TFT color LCD
* Pixel number: 640 x 480
FISH FINDER
* Frequency: 50 and 200 kHz
* Transducer: 600 W (cannot do 1kW)
* Range Scale: 2-1200 m
* Pulselength & PRR: 0.1-3 ms, Max 3,000 pulse/min
* Display Mode: Single frequency (50 or 200 kHz), Dual-frequency, Zoom, Nav data, A-scope, Marker zoom, Bottom zoom, Bottom-lock, Bottom Discrimination, ACCU-FISH™
OTHERS
* Waterproofing: IP55
* Power Supply: 12-24 VDC : 1.2 – 0.6 A
* Size (mm): 207 (H) x 170 (W) x 132 (D)
* Weight Bracket Mount: 1.3 kgWHAT’S IN THE BOX:
* Furuno FCV-628 Head Unit
* Power Cable
* Swivel Mounting Bracket
* Instruction Manual
* Airmar P66 50/200kHz Transom Mount TransducerSKU: 196628+193461 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin echoMAP PLUS 45cv 4.3in Sounder/GPS Combo with ClearVu Sonar
Sounder-GPS Combos, Sounders and FishfindersGarmin echoMAP PLUS 45cv 4.3in Sounder/GPS Combo with ClearVu Sonar
Garmin echoMAP PLUS 45cv 4.3-inch (105mm) Sounder/GPS Combo with ClearVu Sonar (Garmin Part Number: 010-01887-20) – RRP $499
A Great Addition to Any Fishing or Boating Trip
- Bright, sunlight-readable 4.3” combo
- Includes transducer for Garmin CHIRP traditional sonar plus CHIRP ClearVü™ scanning sonar with transom and trolling motor mounts
- Preloaded Australia and New Zealand maps
- Built-in Garmin Quickdraw™ Contours mapping software instantly creates personalized fishing maps on-screen with 1’ contours as you fish
- Share waypoints and routes with other ECHOMAP™ or STRIKER™ units
This compact combo has lots of built-in benefits. Easy-to-install and even easier to use, it has a bright screen 4.3” display that is easy to read on a sunny day on the water. It includes one transducer that features both Garmin CHIRP traditional sonar that delivers remarkable target separation and CHIRP ClearVü scanning sonar for nearly photographic images of what’s below the boat. Preloaded with Australia and New Zealand maps. Plus, it has Quickdraw Contours mapping software to instantly create personalised fishing maps on-screen with 1’ contours as you fish. You own these maps. They are yours to keep private or share with the Quickdraw Community on Garmin Connect™. Plus, you can share waypoints and routes with other ECHOMAP or STRIKER units. It also features a quick-release mount allowing you to quickly install and remove your device from power and mount. Transom and trolling motor mounts included.
The Garmin CHIRP Difference
The built-in sonar capabilities of ECHOMAP Plus 45cv include our CHIRP traditional sonar, one of the most sophisticated sonar technologies available for the fishing and boating public. CHIRP traditional sonar provides amazingly clear target separation and definition, because it puts even more energy onto the target than traditional sonar. It also provides traditional sonar support for Minn Kota® and MotorGuide®trolling motors with integrated transducers.
Clear Scanning Sonar Images
Garmin CHIRP ClearVü scanning sonar gives you a nearly photographic image of what’s below your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar are combined into 1 transducer.
Quickdraw Contours to Create Your Own Maps
Instantly create personalised fishing maps on-screen with 1’ contours as you fish. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.
Upgrade to Our Best Maps on the Water
Step up to BlueChart g2 HD or BlueChart g2 Vision HD, which adds Auto Guidance¹ and other great features. A single microSD™ card slot provides expandable memory for accessory map purchases. Or purchase maps with OneChart through the ActiveCaptain app and automatically sync with your compatible chartplotter, eliminating the need for an SD card.
Take Your ECHOMAP Plus with You
When you’re off the water, it’s easy to keep your ECHOMAP Plus combo safe and secure. You don’t have to mess with plugging and unplugging wires from the unit because the cords plug directly into the mount. This allows you to quickly install and remove your ECHOMAP Plus from power and the mount.
Specifications
General
Physical dimensions 4.0″ x 8.0″ x 3.1″ (10.2 x 20.4 x 0.4 cm)
Weight 1.6 lbs (0.7 kg)
Water rating
IPX7Display type
WQVGA display
Display size
2.1″ x 3.7″; 4.3″ diagonal(5.4 x 9.5 cm; 10.5 cm diagonal)
Display resolution 480 x 272 pixels
Power consumption
5WAntenna Internal_or_external_over_NMEA_0183
Mounting options Bail or flush
Receiver
5 HzGarmin Marine Network™ ports
NoneMaps & Memory
Accepts data cards
1 microSD™ card; 32 GB maximum card sizeWaypoints
5,000Routes 100
Track log 50,000 points; 50 saved tracks
Preloaded maps
BlueChart® g2 (coastal maps)Outdoor Recreation Features
Tide tables
Chartplotter Features
Garmin Sonar compatible
Supports AIS (tracks target ships position)
Supports DSC (displays position data from DSC-capable VHF radio)
Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
CHIRP (low, mid, high)Traditional: 50/77/83/200 kHz
ClearVü: 260/455/800 kHz
Transmit power 500 W (RMS) / 4,000 W (peak to peak)
CHIRP sonar technology Yes (Built-in)
ClearVü
Yes with CHIRP (built-in)SideVü
NoMaximum depth
2,300 ft @ 77 kHz, freshwater1,100 ft @ 77 kHz, saltwater
(depth capacity is dependent on water bottom type and other water conditions)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Sonar recording
Sonar history rewind
Connections
Transducer pin numbers 4
NMEA 0183 input ports
1NMEA 0183 output ports
1Video input ports None
Video output ports None
Wireless connectivity
NoGarmin GT20-TM – Transom Mount ClearVü 500 W (455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (4-pin):
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
– ECHOMAP Plus 45cv with BlueChart g2 for Australia and New Zealand
– GT20-TM transducer
– Power/data cable
– Tilt/swivel mount with quick release cradle
– Flush mount
– Hardware
– Documentation
We are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01887-20 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin echoMAP PLUS 65cv 6in Sounder/GPS Combo with ClearVu Sonar
Sounder-GPS Combos, Sounders and FishfindersGarmin echoMAP PLUS 65cv 6in Sounder/GPS Combo with ClearVu Sonar
Garmin echoMAP PLUS 65cv 6-inch Sounder/GPS Combo with ClearVu Sonar (Garmin Part Number: 010-01887-20) – RRP $799
The Combo with Connections
- Bright, sunlight-readable 6” combo
- Includes transducer for Garmin CHIRP traditional sonar plus CHIRP ClearVü™ scanning sonar with transom and trolling motor mounts
- Preloaded with Australia and New Zealand maps
- Built-in Garmin Quickdraw™ Contours mapping software instantly creates personalised fishing maps on-screen with 1’ contours as you fish
- Use built-in Wi-Fi® to pair with the free ActiveCaptain™ app for access to OneChart™, smart notifications¹, Garmin Quickdraw™ Community data and more
- Share waypoints and routes with other ECHOMAP™ or STRIKER™ units
Bright, sunlight-readable 6” combo includes one transducer that features both Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar. Preloaded with Australia and New Zealand maps. Plus, Quickdraw Contours mapping software to instantly create personalised fishing maps on-screen with 1’ contours as you fish. It also has built-in Wi-Fi® to pair with the free ActiveCaptain app for access to OneChart, which allows you to purchase and download new charts. ActiveCaptain also gives you access to smart notifications1, the ActiveCaptain community for marina and other points of interest details, Quickdraw Community data and more. You can also share waypoints and routes with other ECHOMAP or STRIKER units. Features quick-release bail mount to make it easy to remove and take with you. Transom and trolling motor mounts included.
The Garmin CHIRP Difference
The built-in sonar capabilities of ECHOMAP Plus 65cv include our CHIRP traditional sonar, one of the most sophisticated sonar technologies available for the fishing and boating public. CHIRP traditional sonar provides amazingly clear target separation and definition, because it puts even more energy onto the target than traditional sonar. It also provides traditional sonar support for Minn Kota® and MotorGuide®trolling motors with integrated transducers.
Clear Scanning Sonar Images
Garmin CHIRP ClearVü scanning sonar gives you a nearly photographic image of what’s below your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar and CHIRP ClearVü scanning sonar are combined into 1 transducer.
Quickdraw Contours to Create Your Own Maps
Instantly create personalised fishing maps on-screen with 1’ contours as you fish. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.
Upgrade to Our Best Maps on the Water
Step up to BlueChart g2 HD or BlueChart g2 Vision HD, which adds Auto Guidance¹ and other great features. A single microSD™ card slot provides expandable memory for accessory map purchases. Or purchase maps with OneChart through the ActiveCaptain app and automatically sync with your compatible chartplotter, eliminating the need for an SD card.
Take Your ECHOMAP Plus with You
When you’re off the water, it’s easy to keep your ECHOMAP Plus combo safe and secure. You don’t have to mess with plugging and unplugging wires from the unit because the cords plug directly into the mount. This allows you to quickly install and remove your ECHOMAP Plus from power and the mount.
Specifications
General
Physical dimensions 4.0″ x 8.0″ x 3.1″ (10.2 x 20.4 x 0.4 cm)
Weight 1.6 lbs (0.7 kg)
Water rating
IPX7Display type
General
Physical dimensions 8.6″ x 5.1″ x 2.6″ (21.8 x 13.0 x 6.2cm)
Weight
1.6 lbs (0.7 kg)Water rating
IPX7Display type WVGA display
Display size 5.4″ x 3.1″; 6.2″ diagonal (13.7 x 7.7 cm; 15.2 cm diagonal)
Display resolution 480 x 800 pixels
Power consumption
12WAntenna Internal_or_external_over_NMEA_2000
Mounting options Bail or flush
Receiver
5 HzGarmin Marine Network™ ports
NoneMaps & Memory
Accepts data cards
1 microSD™ card; 32 GB maximum card sizeWaypoints
5,000Routes 100
Track log 50,000 points; 50 saved tracks
Preloaded maps
BlueChart® g2 (coastal maps)Outdoor Recreation Features
Tide tables
Chartplotter Features
Garmin Sonar compatible
Supports AIS (tracks target ships position)
Supports DSC (displays position data from DSC-capable VHF radio)Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
CHIRP (low, mid, high)Traditional: 50/77/83/200 kHz
ClearVü: 260/455/800 kHz
Transmit power 500 W (RMS) / 4,000 W (peak to peak)
CHIRP sonar technology Yes (Built-in)
ClearVü
Yes with CHIRP (built-in)SideVü
NoMaximum depth
2,300 ft @ 77 kHz, freshwater1,100 ft @ 77 kHz, saltwater
(depth capacity is dependent on water bottom type and other water conditions)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Sonar recording
Sonar history rewindConnections
NMEA 2000® compatible
Transducer pin numbers 4
NMEA 0183 input ports
1NMEA 0183 output ports
1Video input ports None
Video output ports None
Wireless connectivity
YesGarmin GT22HW-TM – Transom Mount ClearVü 350W (455/800 kHz) Traditional 250 W (77/200 kHz) Transducer with Temp (8-pin):
GT22HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü scanning sonar. This transom or trolling motor mounted transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below the boat.
The 8-pin transducer features high wide band CHIRP traditional sonar (150-240 kHz) and has a power rating of 250 W. The CHIRP ClearVü (455/800 kHz) element has a power rating of 350 W.
GT22HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
– ECHOMAP Plus 65cv with BlueChart g2 for Australia and New Zealand
– GT22HW-TM transducer
– Power/data cable
– Tilt/swivel mount with quick release cradle
– Flush mount
– Hardware
– DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01891-20 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Echomap Ultra 105sv With GT54UHD-TM Transducer
Garmin Echomap Ultra 105sv With GT54UHD-TM Transducer /GPS Combo with ClearVu Sonar and SideVu (Garmin Part Number: 010-02111-20)
BRAND NEW FROM GARMIN ! The all new echomap ultra series !
KEy added features of the new ultra series
- PRE LOADED WITH AUSTRALIA WIDE G2 VISION CHARTS WITH AUTO GUIDANCE FEATURE
- bUILT IN ULTRA HIGH DEFINITION (udh) sONAR TECHNOLOGY
- 10 AND 12′ KEYED-ASSIST TOUCHSCREEN COMBO UNITS WHICH INCLUDE THE ALL-IN-ONE TRANSDUCER AND UHD /CHIRP
- BUILT IN SUPPORT FOR THE FULL LINE OF PANOPTIX SONARS INCLUDING LIVESCOPE
- Share sonar, waypoints and routes with other ECHOMAP Ultra 10” and 12” units as well as ECHOMAP Plus 7” and 9” units
- Built-in Quickdraw Contours mapping software instantly creates personalized fishing maps on-screen with 1’ contours as you fish
- Built-in Wi-Fi connectivity pairs with the free ActiveCaptain
- NMEA 2000 connectivity and support for heading sensors, autopilots, digital switching, FUSION-Link audio system and more
- READ MORE BELOW
The ECHOMAP Ultra 125sv combo, with its bright, sunlight-readable 12” keyed-assist touchscreen display, has all the tools you need for successful fishing. It includes an all-in-one transducer for CHIRP traditional and Ultra High-Definition ClearVü and SideVü scanning sonars. It also includes preloaded BlueChart g2 coastal charts with Auto Guidance¹ technology.
Panoptix Sonar Support
The ECHOMAP Ultra 125sv combo also supports optional Panoptix LiveScope LVS12 sonar (no black boxes required) plus the full line of Panoptix all-seeing sonar transducers. It also supports the Panoptix LiveScope system.
Best-in-market Preloaded Maps and Charts
It comes preloaded with BlueChart g2 coastal charts with Auto Guidance¹ technology that uses your desired depth and overhead clearance to calculate routes and display a suggested path to follow.
Quickdraw Contours to Create Your Own Maps
Instantly create personalized fishing maps on-screen with 1’ contours as you fish. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™, our online community.
Share Sonar, Waypoints and Routes
Have more than one unit? You can share sonar, waypoints and routes with other ECHOMAP Ultra 10” and 12” units as well as ECHOMAP Plus 7” and 9” units.
The Ultimate Connected Boating App
Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications² on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device.
Take Your ECHOMAP Ultra with You
When you’re off the water, it’s easy to keep your ECHOMAP Ultra combo safe and secure. You don’t have to mess with plugging and unplugging wires from the unit, because the cords plug directly into the quick-disconnect bail mount. This allows you to quickly install and remove your ECHOMAP Ultra from power and the mount.
The Combo with Connections
- Bright, sunlight-readable 9” keyed-assist touchscreen combo
- Includes transducer for Garmin high wide CHIRP traditional sonar plus CHIRP ClearVü™ and CHIRP SideVü™ scanning sonars and compatible with Panoptix™ all-seeing sonar (sold separately)
- Preloaded Australia and New Zealand maps
- Built-in Garmin Quickdraw™ Contours mapping software instantly creates personalised fishing maps on-screen with 1’ contours as you fish
- Use built-in Wi-Fi® to pair with the free ActiveCaptain™ app for access to OneChart™, smart notifications¹, Garmin Quickdraw™ Community data and more
Bright, sunlight-readable 9” combo offers the convenience of a keyed-assist touchscreen. It comes with one transducer that encompasses Garmin high wide CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars, and it’s also compatible with Panoptix all-seeing sonar. Preloaded with Australia and New Zealand maps. Plus, Quickdraw Contours mapping software to instantly create personalised fishing maps on-screen with 1’ contours as you fish. It also has built-in Wi-Fi to pair with the free ActiveCaptain app for access to OneChart, which allows you to purchase and download new charts. ActiveCaptain also gives you access to smart notifications1, the ActiveCaptain community for marina and other points of interest details, Quickdraw Community data and more. Features quick-release bail mount to make it easy to remove and take with you. Transom and trolling motor mounts included.
The Garmin CHIRP Difference
The built-in sonar capabilities of ECHOMAP Plus 95sv include our CHIRP traditional sonar, one of the most sophisticated sonar technologies available for the fishing and boating public. CHIRP traditional sonar provides amazingly clear target separation and definition, because it puts even more energy onto the target than traditional sonar. It also provides traditional sonar support for Minn Kota® and MotorGuide®trolling motors with integrated transducers.
Clear Scanning Sonar Images
Garmin CHIRP ClearVü scanning sonar gives you a nearly photographic image of what’s below your boat. Garmin CHIRP SideVü shows you in incredible detail, what lies off to the sides of your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar and ClearVü and SideVü scanning sonar are combined into 1 transducer.
Quickdraw Contours to Create Your Own Maps
Instantly create personalised fishing maps on-screen with 1’ contours. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.
Get Connected with ActiveCaptain App
Our free all-in-one ActiveCaptain app mobile app allows you to manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your chartplotter, charts, maps and the community. Use the combo’s built-in Wi-Fi® to pair with the free ActiveCaptain app for access to OneChart, which allows you to update or purchase and download new charts. ActiveCaptain also gives you access to smart notifications1, the ActiveCaptain community for marina and other points of interest details, Quickdraw Community data and more.
SailAssist Features
SailAssist features include laylines, enhanced wind rose and heading and course-over-ground lines. See true and apparent wind angle and speed as well as set and drift and a glance. To help you gain a wind-maximising competitive edge, a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start and a race timer.
Upgrade to Our Best Maps on the Water
Step up to BlueChart® g2 HD or BlueChart® g2 Vision® HD, which adds Auto Guidance¹ and other great features. A single microSD™ card slot provides expandable memory for accessory map purchases.
See Fish Swimming in Real Time
Add optional Panoptix all-seeing sonar and see all around your boat and below it — in real time, even while your boat is stationary. See your lure as it sinks, relative to structure in the water. Watch the movement of fish — and their reactions to your bait — up to 100’ away or below the boat.
SKU: 010-02111-20 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Echomap Ultra 125sv
Garmin Echomap Ultra 125sv With GT54UHD-TM Transducerr/GPS Combo with ClearVu Sonar and SideVu (Garmin Part Number: 010-02113-20)
BRAND NEW FROM GARMIN ! The all new echomap ultra series !
KEy added features of the new ultra series
- PRE LOADED WITH AUSTRALIA WIDE G2 VISION CHARTS WITH AUTO GUIDANCE FEATURE
- bUILT IN ULTRA HIGH DEFINITION (udh) sONAR TECHNOLOGY
- 10 AND 12′ KEYED-ASSIST TOUCHSCREEN COMBO UNITS WHICH INCLUDE THE ALL-IN-ONE TRANSDUCER AND UHD /CHIRP
- BUILT IN SUPPORT FOR THE FULL LINE OF PANOPTIX SONARS INCLUDING LIVESCOPE
- Share sonar, waypoints and routes with other ECHOMAP Ultra 10” and 12” units as well as ECHOMAP Plus 7” and 9” units
- Built-in Quickdraw Contours mapping software instantly creates personalized fishing maps on-screen with 1’ contours as you fish
- Built-in Wi-Fi connectivity pairs with the free ActiveCaptain
- NMEA 2000 connectivity and support for heading sensors, autopilots, digital switching, FUSION-Link audio system and more
- READ MORE BELOW
The ECHOMAP Ultra 125sv combo, with its bright, sunlight-readable 12” keyed-assist touchscreen display, has all the tools you need for successful fishing. It includes an all-in-one transducer for CHIRP traditional and Ultra High-Definition ClearVü and SideVü scanning sonars. It also includes preloaded BlueChart g2 coastal charts with Auto Guidance¹ technology.
Panoptix Sonar Support
The ECHOMAP Ultra 125sv combo also supports optional Panoptix LiveScope LVS12 sonar (no black boxes required) plus the full line of Panoptix all-seeing sonar transducers. It also supports the Panoptix LiveScope system.
Best-in-market Preloaded Maps and Charts
It comes preloaded with BlueChart g2 coastal charts with Auto Guidance¹ technology that uses your desired depth and overhead clearance to calculate routes and display a suggested path to follow.
Quickdraw Contours to Create Your Own Maps
Instantly create personalized fishing maps on-screen with 1’ contours as you fish. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™, our online community.
Share Sonar, Waypoints and Routes
Have more than one unit? You can share sonar, waypoints and routes with other ECHOMAP Ultra 10” and 12” units as well as ECHOMAP Plus 7” and 9” units.
The Ultimate Connected Boating App
Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications² on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device.
Take Your ECHOMAP Ultra with You
When you’re off the water, it’s easy to keep your ECHOMAP Ultra combo safe and secure. You don’t have to mess with plugging and unplugging wires from the unit, because the cords plug directly into the quick-disconnect bail mount. This allows you to quickly install and remove your ECHOMAP Ultra from power and the mount.
The Combo with Connections
- Bright, sunlight-readable 9” keyed-assist touchscreen combo
- Includes transducer for Garmin high wide CHIRP traditional sonar plus CHIRP ClearVü™ and CHIRP SideVü™ scanning sonars and compatible with Panoptix™ all-seeing sonar (sold separately)
- Preloaded Australia and New Zealand maps
- Built-in Garmin Quickdraw™ Contours mapping software instantly creates personalised fishing maps on-screen with 1’ contours as you fish
- Use built-in Wi-Fi® to pair with the free ActiveCaptain™ app for access to OneChart™, smart notifications¹, Garmin Quickdraw™ Community data and more
Bright, sunlight-readable 9” combo offers the convenience of a keyed-assist touchscreen. It comes with one transducer that encompasses Garmin high wide CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars, and it’s also compatible with Panoptix all-seeing sonar. Preloaded with Australia and New Zealand maps. Plus, Quickdraw Contours mapping software to instantly create personalised fishing maps on-screen with 1’ contours as you fish. It also has built-in Wi-Fi to pair with the free ActiveCaptain app for access to OneChart, which allows you to purchase and download new charts. ActiveCaptain also gives you access to smart notifications1, the ActiveCaptain community for marina and other points of interest details, Quickdraw Community data and more. Features quick-release bail mount to make it easy to remove and take with you. Transom and trolling motor mounts included.
The Garmin CHIRP Difference
The built-in sonar capabilities of ECHOMAP Plus 95sv include our CHIRP traditional sonar, one of the most sophisticated sonar technologies available for the fishing and boating public. CHIRP traditional sonar provides amazingly clear target separation and definition, because it puts even more energy onto the target than traditional sonar. It also provides traditional sonar support for Minn Kota® and MotorGuide®trolling motors with integrated transducers.
Clear Scanning Sonar Images
Garmin CHIRP ClearVü scanning sonar gives you a nearly photographic image of what’s below your boat. Garmin CHIRP SideVü shows you in incredible detail, what lies off to the sides of your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar and ClearVü and SideVü scanning sonar are combined into 1 transducer.
Quickdraw Contours to Create Your Own Maps
Instantly create personalised fishing maps on-screen with 1’ contours. Tailor them to fit your needs. These are your maps — you own them. Keep the data to yourself, or share it with the Quickdraw Community on Garmin Connect™.
Get Connected with ActiveCaptain App
Our free all-in-one ActiveCaptain app mobile app allows you to manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your chartplotter, charts, maps and the community. Use the combo’s built-in Wi-Fi® to pair with the free ActiveCaptain app for access to OneChart, which allows you to update or purchase and download new charts. ActiveCaptain also gives you access to smart notifications1, the ActiveCaptain community for marina and other points of interest details, Quickdraw Community data and more.
SailAssist Features
SailAssist features include laylines, enhanced wind rose and heading and course-over-ground lines. See true and apparent wind angle and speed as well as set and drift and a glance. To help you gain a wind-maximising competitive edge, a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start and a race timer.
Upgrade to Our Best Maps on the Water
Step up to BlueChart® g2 HD or BlueChart® g2 Vision® HD, which adds Auto Guidance¹ and other great features. A single microSD™ card slot provides expandable memory for accessory map purchases.
See Fish Swimming in Real Time
Add optional Panoptix all-seeing sonar and see all around your boat and below it — in real time, even while your boat is stationary. See your lure as it sinks, relative to structure in the water. Watch the movement of fish — and their reactions to your bait — up to 100’ away or below the boat.
SKU: 010-02113-20 -
Fish Finder, Monthly Specials, Sounders and Fishfinders
Garmin GPSMAP 8410 xsv 10in Touchscreen Sounder/GPS Combo with ClearVu and SideVu Sonar
Fish Finder, Monthly Specials, Sounders and FishfindersGarmin GPSMAP 8410 xsv 10in Touchscreen Sounder/GPS Combo with ClearVu and SideVu Sonar
Garmin GPSMAP 8410xsv 10″ Touchscreen Sounder/GPS Combo with ClearVu and SideVu Sonar Technology (Garmin Part Number: 010-02091-02) – RRP $3799
10” Touchscreen Chartplotter/Sonar Combo with Full HD In-plane Switching (IPS) Display
- Features a 10” full HD IPS touchscreen display
- Built-in support for the full suite of Garmin sonar capabilities
- Fully network capable with NMEA 2000® connectivity and the Garmin Marine Network
- Includes ANT® technology and Wi-Fi® networking
- SmartMode™ station controls enable quick, one-touch access to the information you need
Serious sport fishermen, cruisers, sailors and sail racers demand serious equipment. The easy-to-use, easy-to-install GPSMAP 8410xsv chartplotter/sonar combo delivers MFD performance in a combo-size package. It features a 10” full HD in IPS touchscreen display for wider viewing angles, superior clarity and sunlight readability, even with polarized sunglasses. Multiple displays can be flat mounted edge-to-edge to create a sleek glass helm look or can be mounted flush.
Complete Sonar Support
The GPSMAP 8410xsv chartplotter/sonar combo offers built-in support for our industry-leading sonar, including dual-channel 1 kW traditional CHIRP, CHIRP ClearVü and CHIRP SideVü scanning sonars plus built-in support for Ultra High-Definition scanning sonar (no black box required). It also supports the entire Panoptix™ all-seeing sonar line (transducers sold separately).
Build Your Marine System
NMEA 2000 networking and the Garmin Marine Network allow you to easily build your full marine electronics suite — from radar and autopilots to cameras, instruments and forward-looking sonar — controlled from your chartplotter and shared across multiple screens. In addition, our exclusive OneHelm™ system coordinates many third-party manufactured onboard marine products to bring full control of systems — such as digital switching, lighting, stabilization and more — conveniently to your chartplotter screen.
Full Connectivity
The GPSMAP 8410xsv chartplotter has a premium-performance processor that enables fast map drawing, superior networking, video distribution and more. Built-in Wi-Fi technology lets you pair with the free ActiveCaptain® app for access to OneChart™, smart notifications¹, Garmin Quickdraw™ community data and more. You can also control video streaming from our GC™ 100 wireless camera and VIRB® action cameras. In addition, built-in ANT wireless technology connects you directly to our quatix® marine watch, gWind™ Wireless 2 transducer and wireless remote controls.
SmartMode Station Controls
Networked sonar, radar, cameras, media and digital switching can be independent or incorporated into SmartMode station controls. With SmartMode, everything is designed to give you quick, one-touch access to the information you need to ease high-stress situations such as docking.
Special Sailing Features
The Garmin SailAssist™ feature provides data, displays and prerace guidance to help you gain a competitive edge. Other sailing features include laylines, enhanced wind rose, heading and course-over-ground lines, true wind data fields and tide/current/time slider. Gauge displays provide need-to-know information at a glance, including true and apparent wind angle, set and drift, true or apparent wind speed, horizontal or vertical graphs and a data bar with customizable fields.
The Ultimate Connected Boating App
Download the ActiveCaptain app to your smartphone or tablet to manage your marine experience from anywhere — from trip planning and prefishing to updating software and purchasing maps.
General
Physical dimensions 10.25″ x 8.0625″ x 2.95″ (25.9 cm x 20.5 cm x 7.5 cm)
Display size 8.6″ x 5.4″ (21.8 cm x 13.7 cm)
Display resolution WUXGA; 1920 x 1200 pixels
Display type touchscreen IPS display (anti-glare finish)
Weight
5.2 lbs (2.4kg)
Water rating
IPX6 and IPX7
Polarized Support
J1939 Compatible
Power consumption
2.7 A
Antenna Internal or external over NMEA 2000
Mounting options Bail, flat or flush (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.)
Receiver
10 Hz GPS/GLONASS/Galileo
Garmin Marine Network™ ports
2
Maps & Memory
Accepts data cards
2 microSD cards (on back)
Waypoints 5,000
Routes 100 (250 waypoints each)
Track log 50,000 points; 50 saved tracks
Outdoor Recreation Features
Tide tables
Chartplotter Features
Garmin Radar compatible
Garmin Sonar compatible
yes
Garmin SmartMode compatible (customizable monitor presets)
Supports AIS (tracks target ships position)
Supports DSC (displays position data from DSC-capable VHF radio)
Supports FUSION-Link™ compatible radios
GSD™ Black Box sonar support
GCV™ Black Box sonar support
ActiveCaptain compatible
yes
Garmin Helm™ compatible
yes
GRID™ (Garmin Remote Input Device) compatible
Wireless remote compatible
Sailing Features
Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/200, 77/200, 83/200
Single Channel CHIRP: 40-250
Dual Channel CHIRP: 40-250
SideVü/ClearVü: CHIRP 260/455/800
Ultra High-Definition ClearVü: 0.8 MHz (800 kHz), CHIRP range: 760-880 kHz
Ultra High-Definition SideVü: 1.2 MHz (1,200 kHz), CHIRP range: 1,060-1,170 kHz
(dependent on transducer)
Transmit power 1 kW traditional; 1 kW CHIRP
CHIRP sonar technology Yes (Built-in)
ClearVü
yes
SideVü
yes
Maximum depth 5,000 ft at 1kW (depth capacity is dependent on water bottom type and other water conditions)
Connections
NMEA 2000® compatible
Transducer pin numbers 1 – LVS sonar, 1 – 12 pin scanning sonar, 1- 8 pin sonar
NMEA 0183 input ports
1 differential
NMEA 0183 output ports
1 differential
Video input ports
1 – BNC composite
SKU: 010-02091-02 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin GPSMAP 8412xsv
Garmin GPSMAP 8412xsv 12″ Touchscreen Sounder/GPS Combo with ClearVu and SideVu Sonar Technology
12” Touchscreen Chartplotter/Sonar Combo with Full HD In-plane Switching (IPS) Display
- Features a 12” full HD in IPS touchscreen display
- Built-in support for the full suite of Garmin sonar capabilities
- Fully network capable with NMEA 2000® connectivity and the Garmin Marine Network
- Includes ANT® technology and Wi-Fi® networking
- SmartMode™ station controls enable quick, one-touch access to the information you need
Serious sport fishermen, cruisers, sailors and sail racers demand serious equipment. The easy-to-use, easy-to-install GPSMAP 8412xsv chartplotter/sonar combo delivers MFD performance in a combo-size package. It features a 12” full HD IPS touchscreen display for wider viewing angles, superior clarity and sunlight readability, even with polarized sunglasses. Multiple displays can be flat mounted edge-to-edge to create a sleek glass helm look or can be mounted flush.
Complete Sonar Support
The GPSMAP 8412xsv chartplotter/sonar combo offers built-in support for our industry-leading sonar, including dual-channel 1 kW traditional CHIRP, CHIRP ClearVü and CHIRP SideVü scanning sonars plus built-in support for Ultra High-Definition scanning sonar (no black box required). It also supports the entire Panoptix™ all-seeing sonar line (transducers sold separately).
Build Your Marine System
NMEA 2000 networking and the Garmin Marine Network allow you to easily build your full marine electronics suite — from radar and autopilots to cameras, instruments and forward-looking sonar — controlled from your chartplotter and shared across multiple screens. In addition, our exclusive OneHelm™ system coordinates many third-party manufactured onboard marine products to bring full control of systems — such as digital switching, lighting, stabilization and more — conveniently to your chartplotter screen.
Full Connectivity
The GPSMAP 8412xsv chartplotter has a premium-performance processor that enables fast map drawing, superior networking, video distribution and more. Built-in Wi-Fi technology lets you pair with the free ActiveCaptain® app for access to OneChart™, smart notifications¹, Garmin Quickdraw™ community data and more. You can also control video streaming from our GC™ 100 wireless camera and VIRB® action cameras. In addition, built-in ANT wireless technology connects you directly to our quatix® marine watch, gWind™ Wireless 2 transducer and wireless remote controls.
SmartMode Station Controls
Networked sonar, radar, cameras, media and digital switching can be independent or incorporated into SmartMode station controls. With SmartMode, everything is designed to give you quick, one-touch access to the information you need to ease high-stress situations such as docking.
Special Sailing Features
The Garmin SailAssist™ feature provides data, displays and prerace guidance to help you gain a competitive edge. Other sailing features include laylines, enhanced wind rose, heading and course-over-ground lines, true wind data fields and tide/current/time slider. Gauge displays provide need-to-know information at a glance, including true and apparent wind angle, set and drift, true or apparent wind speed, horizontal or vertical graphs and a data bar with customizable fields.
The Ultimate Connected Boating App
Download the ActiveCaptain app to your smartphone or tablet to manage your marine experience from anywhere — from trip planning and prefishing to updating software and purchasing maps.
General
Physical dimensions 11.9″ x 8.5″ x 3″ (30.3 cm x 21.6 cm x 7.6 cm)
Display size 10.1″ x 5.7″ (25.7 cm x 14.5 cm)
Display resolution FHD; 1920 x 1080 pixels
Display type touchscreen IPS display (anti-glare finish)
Weight 6.2 lbs (2.8 kg)
Water rating IPX6 and IPX7
Polarized Support
Power consumption 3.1 A
Antenna Internal or external over NMEA 2000
Mounting options Bail, flat or flush (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.)
Receiver 10 Hz GPS/GLONASS/Galileo
Garmin Marine Network™ ports2
Maps & Memory
Accepts data cards 2 microSD cards (on back)
Waypoints 5,000
Routes 100 (250 waypoints each)
Track log 50,000 points; 50 saved tracks
Outdoor Recreation Features
Tide tables
Chartplotter Features
Garmin Radar compatible
Garmin Sonar compatible
Garmin SmartMode compatible (customizable monitor presets)
Supports AIS (tracks target ships position)
Supports DSC (displays position data from DSC-capable VHF radio)
Supports FUSION-Link™ compatible radios
GSD™ Black Box sonar support
GCV™ Black Box sonar support
ActiveCaptain compatible
Garmin Helm™ compatible
GRID™ (Garmin Remote Input Device) compatible
Wireless remote compatible
Sailing Features
Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/200, 77/200, 83/200
Single Channel CHIRP: 40-250
Dual Channel CHIRP: 40-250
SideVü/ClearVü: CHIRP 260/455/800
Ultra High-Definition ClearVü: 0.8 MHz (800 kHz), CHIRP range: 760-880 kHz
Ultra High-Definition SideVü: 1.2 MHz (1,200 kHz), CHIRP range: 1,060-1,170 kHz
(dependent on transducer)
Transmit power 1 kW traditional; 1 kW CHIRP
CHIRP sonar technology Yes (Built-in)
ClearVü
SideVü
Maximum depth 5,000 ft at 1kW (depth capacity is dependent on water bottom type and other water conditions)
Conntections
NMEA 2000® compatible
Transducer pin numbers 1 – LVS sonar, 1 – 12 pin scanning sonar, 1- 8 pin sonar
NMEA 0183 input ports 1 differential
NMEA 0183 output ports 1 differential
Video input ports
1 – BNC composite
1 – HDMI (HDCP compliant)
Video output ports 1 HDMI
Wireless connectivity
Visit https://www.northsidemarine.com.au/
https://minnkota.com.au/SKU: 010-01307-02 -
Sounders and Fishfinders
Garmin STRIKER 4 & 4cv Neoprene Cover (BBB-S4C)
Garmin STRIKER 4 & 4cv Neoprene Cover (BBB-S4C)
Garmin neoprene protective cover designed to fit the STRIKER 4 and 4dv. Helps keep the head unit protected when not in use.
*Specifications from suppliers’ information.
SKU: BBB-S4C -
-
Sounders and Fishfinders
Garmin STRIKER 7cv/7dv & 7sv Neoprene Cover (BBB-S7C)
Garmin STRIKER 7cv/7dv & 7sv Neoprene Cover (BBB-S7C)
Garmin neoprene protective cover designed to fit the STRIKER 7cv/dv & 7sv. Helps keep the head unit protected when not in use.
*Specifications from suppliers’ information.
SKU: BBB-S7C -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 4 4.3in Sounder/GPS Combo with Traditional Sonar
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 4 4.3in Sounder/GPS Combo with Traditional Sonar
Garmin Striker PLUS 4 4.3in Sounder/GPS Combo with Traditional Sonar (Garmin Part Number: 010-01870-01) – RRP $249
4” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes dual-beam transducer with Garmin CHIRP traditional sonar for crystal-clear images and remarkable target separation
- Built-in Garmin Quickdraw™ Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 4.3” display and intuitive user interface
- Rugged design for every fishing environment
The STRIKER Plus 4 fishfinder with a bright 4.3” display and built-in GPS features CHIRP sonar for crystal-clear images and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.
Garmin Quickdraw Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 4 can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
CHIRP Sonar Clarity
The STRIKER Plus 4 fishfinder includes Garmin CHIRP technology for a higher level of clarity and detail that you have come to expect from Garmin. Crystal-clear sonar images provide remarkable target separation and resolution in shallow and deeper water. Bottom contours are more visible, even at higher speeds, and signal noise can be suppressed at greater depths for a timely interpretation of what’s below.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip.
GPS also allows STRIKER Plus 4 to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 4 fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 3.9” x 6.9” x 1.8” (9.8 x 17.4 x 4.5 cm)
Weight
0.7 lbs (0.3 kg)Water rating IPX7
Display type QSVGA
Display resolution 272 X 480 pixelsSonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/83/200 kHzTransmit power 200 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.23AGarmin GT20-TM – Transom Mount ClearVü 500 W (455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (4-pin):
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
– STRIKER Plus 4 fishfinder
– Garmin dual beam transducer
– Power/data cable
– Tilt/swivel mount
– Hardware
– DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01870-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 4CV 4.3in Sounder/GPS Combo with Traditional Sonar and ClearVu
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 4CV 4.3in Sounder/GPS Combo with Traditional Sonar and ClearVu
Garmin Striker PLUS 4CV 4.3in Sounder/GPS Combo with Traditional Sonar and ClearVu (Garmin Part Number: 010-01871-01) – RRP $349
4” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
- Built-in Garmin Quickdraw™ Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 4.3” display and intuitive user interface
- Rugged design for every fishing environment
The STRIKER Plus 4cv fishfinder with a bright 4.3” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü™ scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.
Garmin Quickdraw Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 4cv can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
CHIRP ClearVü Clarity
The STRIKER Plus 4cv fishfinder includes Garmin CHIRP technology combined with Garmin ClearVü™ scanning sonar for a nearly photographic, wide image of what passes below your boat. You clearly see structure, submerged objects and fish. Paired with Garmin CHIRP traditional sonar for remarkable target separation, this transducer will help you catch more fish.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip.
GPS also allows STRIKER Plus 4cv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 4cv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 3.9” x 6.9” x 1.8” (9.8 x 17.4 x 4.5 cm)
Weight
0.7 lbs (0.3 kg)Water rating IPX7
Display type QSVGA
Display resolution 272 X 480 pixelsSonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/200 kHzCHIRP (mid and high)
ClearVü 260/455/800 kHz
Transmit power 300 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.40AGarmin GT20-TM – Transom Mount ClearVü 500 W (455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (4-pin):
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
– STRIKER Plus 4cv fishfinder
– GT20-TM transducer
– Power/data cable
– Tilt/swivel mount
– Hardware
– DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01871-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 5CV 5in Sounder/GPS Combo with Traditional Sonar and ClearVu
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 5CV 5in Sounder/GPS Combo with Traditional Sonar and ClearVu
Garmin Striker PLUS 5CV 5in Sounder/GPS Combo with Traditional Sonar and ClearVu (Garmin Part Number: 010-01872-01) – RRP $449
5” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
- Built-in Garmin Quickdraw™ Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 5” display and intuitive user interface
- Rugged design for every fishing environment
The STRIKER Plus 5cv fishfinder with a bright 5” display and built-in GPS features Garmin CHIRP traditional sonar, Garmin CHIRP ClearVü™ scanning sonar and Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. The built-in GPS lets you mark and navigate to waypoints and shows your boat’s speed.
Garmin Quickdraw Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 5cv can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
CHIRP ClearVü Clarity
The STRIKER Plus 5cv fishfinder includes Garmin CHIRP technology combined with Garmin ClearVü™ scanning sonar for a nearly photographic, wide image of what passes below your boat. You clearly see structure, submerged objects and fish. Paired with Garmin CHIRP traditional sonar for remarkable target separation, this transducer will help you catch more fish.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip.
GPS also allows STRIKER Plus 5cv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 5cv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 7.4’’ x 4.5’’ x 2.1’’ (18.8 x 11.6 x 5.4 cm)
Weight
1.0 lb (0.5 kg)Water rating IPX7
Display type WVGA color
Display resolution 800 x 480 pixelsSonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/200 kHzCHIRP (mid and high)
ClearVü 260/455/800 kHz
Transmit power 500 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.40AGarmin GT20-TM – Transom Mount ClearVü 500 W (455/800 kHz) Traditional 500 W (77/200 kHz) Transducer with Temp (4-pin):
Get ultra-clear sonar pictures of objects, structure and fish that pass below your boat with this all-in-one 4-pin transducer. This 20 ft transducer cable with built-in fast response temperature sensor has a power rating of 500 W; a depth of 1,900 ft (traditional) and 750 ft (ClearVü); an operating frequency of 77/200 kHz (traditional) and 455 kHz (ClearVü); and a 0 to 70 transom angle. Transducer comes with transom and trolling motor mounts, and installation instructions. Follow the instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
– STRIKER Plus 5cv fishfinder
– GT20-TM transducer
– Power/data cable
– Tilt/swivel mount
– Hardware
– Garmin bumper sticker
– DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01872-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 7CV 7in Sounder/GPS Combo with Traditional Sonar and ClearVu
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 7CV 7in Sounder/GPS Combo with Traditional Sonar and ClearVu
Garmin Striker PLUS 7CV 7in Sounder/GPS Combo with Traditional Sonar and ClearVu (Garmin Part Number: 010-01873-01) – RRP $649
7” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü scanning sonar
- Built-in Garmin Quickdraw™ Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in Wi-Fi® for access to ActiveCaptain™ app so you can receive smart notifications¹, access Quickdraw Contours Community and transfer waypoints and software update notifications
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 7” display and intuitive user interface
The STRIKER Plus 7cv fishfinder with a bright 7” display and built-in GPS features Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides remarkable target separation, and Garmin CHIRP ClearVü™ scanning sonar shows nearly photographic images of what passes below your boat. Use built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications¹, access to Quickdraw Contours Community data and more.
Garmin Quickdraw Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 7cv can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
ActiveCaptain App
STRIKER Plus 7cv features built-in Wi-Fi, so you can pair with the free, all-in-one ActiveCaptain app. Once paired, you can get smart notifications¹ right on your screen. You can also access the Quickdraw Contours Community to share some of your new maps or download new data from the community. You’ll even be able to get update notifications for your fishfinder using the Wi-Fi connection and the ActiveCaptain app.
CHIRP ClearVü Clarity
The STRIKER Plus 7cv fishfinder includes Garmin CHIRP technology combined with Garmin ClearVü™ scanning sonar for a nearly photographic, wide image of what passes below your boat. You clearly see structure, submerged objects and fish. Paired with Garmin CHIRP traditional sonar for remarkable target separation, this transducer will help you catch more fish.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip. GPS also allows STRIKER Plus 7cv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 7cv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 9.3” x 5.5” x 2.3” (23.5 x 14.0 x 5.8 cm)
Weight
1.7 lbs (0.8 kg)Water rating IPX7
Display type WVGA color
Display resolution 800 x 480 pixels
Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/200 kHzCHIRP (mid and high)
ClearVü 260/455/800 kHz
Transmit power 500 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Wireless Connectivity: Yes
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.55AWHAT’S IN THE BOX:
– STRIKER Plus 7cv fishfinder
– GT20-TM transducer
– Power/data cable
– Tilt/swivel mount
– Hardware
– Garmin bumper sticker
– DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01873-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 7SV 7in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 7SV 7in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu
Garmin Striker PLUS 7SV 7in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu (Garmin Part Number: 010-01874-01) – RRP $749
7” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars
- Built-in Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in Wi-Fi® for access to ActiveCaptain™ app so you can receive smart notifications¹, access Quickdraw Contours Community and transfer waypoints and software update notifications
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 7” display and intuitive user interface
The STRIKER Plus 7sv fishfinder with a bright 7” display and built-in GPS features Garmin Quickdraw™ Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation. Get nearly photographic images of what passes below and beside your boat with CHIRP ClearVü and CHIRP SideVü scanning sonars. Use built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications¹, access to Quickdraw Contours Community data and more.
Garmin Quickdraw Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 7sv can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
ActiveCaptain App
STRIKER Plus 7sv features built-in Wi-Fi, so you can pair with the free, all-in-one ActiveCaptain app. Once paired, you can get smart notifications1 right on your screen. You can also access the Quickdraw Contours Community to share some of your new maps or download new data from the community. You’ll even be able to get updates for your fishfinder using the Wi-Fi connection and the ActiveCaptain app.
Clear Scanning Sonar Images
Garmin ClearVü™ scanning sonar gives you a nearly photographic, wide image of what passes below your boat. Garmin SideVü™ scanning sonar gives you a crisp, clear view of what lies off to each side of your boat. You clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar provides remarkable target separation. All this sonar technology is combined into 1 transducer to help you catch more fish.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip. GPS also allows STRIKER Plus 7sv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 7sv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 9.3” x 5.5” x 2.3” (23.5 x 14.0 x 5.8 cm)
Weight
1.7 lbs (0.8 kg)Water rating IPX7
Display type WVGA color
Display resolution 800 x 480 pixels
Sonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/200 kHzCHIRP (mid and high)
ClearVü and SideVü 260/455/800 kHz
Transmit power 500 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Wireless Connectivity: Yes
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.67AGarmin GT52HW-TM – Transom Mount ClearVü 350W (455/800 kHz) Traditional 250 W (77/200 kHz) Transducer with Temp (12-pin): $499
GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat.
The 12-pin transducer features high wide band CHIRP traditional sonar and has a power rating of 250 W. The CHIRP ClearVü and CHIRP SideVü (455/800 kHz) elements have a power rating of 350 W each (1,050 W total).
GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX:
STRIKER Plus 7sv fishfinder
GT52HW-TM transducer
Power/data cable
12-pin to dual 4-pin transducer adapter cable
Tilt/swivel mount
Hardware
Garmin bumper sticker
DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01874-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Garmin Striker PLUS 9SV 9in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu
Sounder-GPS Combos, Sounders and FishfindersGarmin Striker PLUS 9SV 9in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu
Garmin Striker PLUS 9SV 9in Sounder/GPS Combo with Traditional Sonar, ClearVu and SideVu (Garmin Part Number: 010-01875-01) – RRP $899
9” GPS Fishfinder with Industry-leading Sonar and Quickdraw Contours Mapping Software
- Includes transducer for built-in Garmin CHIRP traditional sonar plus CHIRP ClearVü and CHIRP SideVü scanning sonars
- Built-in Quickdraw Contours mapping software lets you create and store maps with 1’ contours for up to 2 million acres
- Built-in Wi-Fi® for access to ActiveCaptain™ app so you can receive smart notifications¹, access Quickdraw Contours Community and transfer waypoints and software update notifications
- Built-in GPS lets you mark waypoints, create routes and view boat’s speed
- Bright, sunlight-readable 9” display and intuitive user interface
The STRIKER Plus 9sv fishfinder with a bright 9” display and built-in GPS features Quickdraw Contours map drawing software, which stores up to 2 million acres of content with 1’ contours. Garmin CHIRP traditional sonar provides crystal-clear images with remarkable target separation. Get nearly photographic images of what passes below and beside your boat with CHIRP ClearVü and CHIRP SideVü scanning sonars. Use built-in Wi-Fi to pair with the ActiveCaptain app for smart notifications¹, access to Quickdraw Contours Community data and more.
Garmin Quickdraw™ Contours
Nobody knows the waters you fish better than you and your fellow fishermen. While you are trolling the shorelines and the depths, Quickdraw Contours mapping software creates HD fishing maps of the places you’ve been. No special knowledge is required. STRIKER Plus 9sv can now store up to 2 million acres of your Quickdraw Contours maps with 1’ contours.
ActiveCaptain App
STRIKER Plus 9sv features built-in Wi-Fi, so you can pair with the free, all-in-one ActiveCaptain app. Once paired, you can get smart notifications¹ right on your screen. You can also access the Quickdraw Contours Community to share some of your new maps or download new data from the community. You’ll even be able to get updates for your fishfinder using the Wi-Fi connection and the ActiveCaptain app.
Clear Scanning Sonar Images
STRIKER™ Plus 9sv supports Garmin ClearVü™ scanning sonar, which gives you a nearly photographic, wide image of what passes below your boat. It also supports Garmin SideVü™ scanning sonar for a crisp, clear view of what lies off to each side of your boat, so you can clearly see structure, submerged objects and fish. Garmin CHIRP traditional sonar provides clear fish arches and remarkable target separation.
GPS Fishfinder
The built-in, high-sensitivity GPS finds and maintains your position anywhere you go on the water. The GPS allows you to mark waypoints for different locations. So, if the fish are biting in 1 spot, you can mark it, and return to it on your next trip. Mark docks, boat ramps and other locations on the lake, and create routes back to them for your next trip.
GPS also allows STRIKER Plus 9sv to show your speed on screen, so you can be sure you’re trolling at the right speed for the lure you’re using or in wake-controlled areas.
Built for You
The STRIKER Plus 9sv fishfinder makes fishing a breeze, and it’s built to work in any environment. The bright, sunlight-readable display gives you a clear view of what is below your boat, even on the brightest days. And the larger screen gives you a better view of what is happening below the boat. The intuitive user interface makes it simple to navigate to whatever feature you need, so you are ready for anything on the water.
General
Physical dimensions 11.1” x 6.5” x 2.4” (28.2 x 16.5 x 6.0 cm)
Weight
2.4 lbs (1.1 kg)Water rating IPX7
Display type WVGA color
Display resolution 800 x 480 pixelsSonar Features & Specifications
Dual-frequency (50/200 kHz) sonar capable
Dual-beam (77/200 kHz) sonar capable
Frequencies supported
Traditional: 50/77/200 kHzCHIRP (mid and high)
ClearVü and SideVü 260/455/800 kHz
Transmit power 500 W (RMS)
Bottom lock (shows return from the bottom up)
Water temperature log and graph
Fishfinder Features
Split-screen zoom
Ultrascroll® (displays fish targets at higher boat speeds)
Fish Symbol ID (helps identify fish targets)
AutoGain Technology (minimizes clutter, maximizes targets)
Adjustable depth line (measures depth of underwater objects)
A-scope (real time display of fish passing through transducer beam)
Water temperature sensor included
Additional
Additional
Wireless Connectivity: Yes
Quickdraw Contours
Integrated GPS
Mark Waypoints
Course over Ground (COG)
Current draw @ 12V: 0.75AGarmin GT52HW-TM – Transom Mount ClearVü 350W (455/800 kHz) Traditional 250 W (77/200 kHz) Transducer with Temp (12-pin): $499
GT52HW-TM transducer is perfect for freshwater fishermen who want CHIRP traditional sonar and CHIRP ClearVü and CHIRP SideVü scanning sonar. This transom mount transducer consistently displays clear and crisp fish arches with superior target separation as well as clear definition of structure below and to the side of the boat.
The 12-pin transducer features high wide band CHIRP traditional sonar and has a power rating of 250 W. The CHIRP ClearVü and CHIRP SideVü (455/800 kHz) elements have a power rating of 350 W each (1,050 W total).
GT52HW-TM is ideal for mounting to a trolling motor due to its compact size. For installation, follow the included instructions carefully to avoid damaging your boat.
WHAT’S IN THE BOX
STRIKER Plus 9sv fishfinder
GT52HW-TM transducer
Power/data cable
12-pin to dual 4-pin transducer adapter cable
Tilt mount
Hardware
Garmin bumper sticker
DocumentationWe are an authorised Australian Garmin retailer, as such Full Australian Manufacturers Warranty is applicable for this item. Please note if a Garmin unit is purchased overseas or from a non-authorised Garmin retailer you may not receive warranty coverage in Australia.
*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater. Images for display purposes only.
SKU: 010-01875-01 -
Sounder-GPS Combos, Sounders and Fishfinders
Lowrance Elite-12 Ti2 12in Touch Screen Combo with 3-1 Active Imaging ( 000-14661-001)
Sounder-GPS Combos, Sounders and FishfindersLowrance Elite-12 Ti2 12in Touch Screen Combo with 3-1 Active Imaging ( 000-14661-001)
Lowrance Elite-12 Ti2 12in Touch Screen Combo with 3in1 Active Imaging Transducer and Australia Wide C-Map charts (Lowrance Part # 000-14661-001)
Details
With the new Elite Ti², you get more advanced fishfinding features and connectivity, without the premium price. From high-detail Active Imaging™ sonar, FishReveal™, built-in Genesis Live real-time mapping and enhanced screen clarity and target separation to features that make your life easier on the water, like an easy-to-use touchscreen, wireless networking, smartphone notifications and trolling motor/Power Pole® integration – Elite Ti² was designed to help you have an easier time finding fish. Active Imaging 3-in-1 sonar (CHIRP, SideScan and DownScan) and 2-in-1 sonar (SideScan and DownScan) lift Elite Ti² fishfinding performance to another level, offering offer greater resolution, clarity and contrast at a range unmatched by any fishfinder in its category. Elite Ti² delivers more powerful navigation features with preloaded C-MAP® AUS/NZ C-MAP Easy Routing + Genesis Live real-time mapping.You will have a much easier time targeting key fishing areas with a C-MAP card. If you would rather create your own maps of a favorite fishing spot or a lake without detailed mapping, take advantage of the built-in Genesis Live real-time mapping capability to create your own, exclusive ½-foot contour maps live on the screen of your Elite Ti² display. New Elite Ti² wireless networking allows you to share sonar, waypoint and route data wirelessly between Elite Ti² displays, removing the need to run cable. With new smartphone notification capability built into Elite Ti², you can keep your eyes on the fish and never miss another text or call; or turn off notifications for uninterrupted fishing.
Key Features
- Active Imaging 3-in-1 Sonar (CHIRP/Side/Down) Ready
- Active Imaging 2-in-1 Sonar (Side/Down) Ready
- C-MAP Genesis Live
- Smartphone Notifications
- Wireless Networking
- FishReveal™ Smart Target View
- PreloadedAUS/NZ Chart card
- C-MAP Easy Routing, Navionics Autorouting capability
- Easy-to-use, high-resolution touchscreen display
- Built-in CHIRP and Broadband Sounder®
- SmartSteer™ control for Xi5 Trolling Motor
- Integrated wireless connectivity
- NMEA 2000® engine support
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
SPECS
Display
Size 12″/ 304.8 mm (16:9) Resolution 1280 W x 800 H Brightness > 1200 nits Touch Screen Yes – Single Touch Viewing Angle 50° top, 60° bottom, 70° left/ right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 22 W (1.6 A at 13.8 V DC) Dimensions
Product Width 12.9”/ 328 mm Product Depth 3.5”/ 89 mm Product Height 8.8”/ 224 mm Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Humidity IEC 60945 Damp heat 66°C (150°F) at 95% relative (48 hr) Shock and Vibration 100 000 cycles of 20 G Sonar
Power Output Max 500W RMS Active Imaging 3-in-1 DownScan Imaging™ at 455 kHz: Max 300 ft / 91 m: SideScan Imaging at 455kHz: Max 300 ft./91 m to each side CHIRP Sonar High Range/200 kHz: 1000 ft / 305 m CHIRP Sonar Med Range/83 kHz: 1000 ft / 305 m Available Sonar Frequencies Low/Mid/High CHIRP, 50/83/200 kHz Broadband, 455/800 kHz SideScan/DownScan imaging Depth Alarm Yes Shallow Alarm Yes Temperature Readings Yes Transducer Type 9-pin Connection, with optional 9-pin to 7-pin adapter; Multiple Selections Lowrance® and Airmar® GPS Navigation
Routes 100 Waypoint Storage 3000 Plot Trails Up to 100 trails with up to 10,000 points per trail GPS Antenna Type 10kHz Internal high-sensitivity WAAS/EGNOS/MSAS GPS Alarms Yes Custom Mapping Optional Americas chart upgrades include C-MAP Insight PRO, C-MAP Lake Insight HD, C-MAP MAX-N, Navionics® HotMaps® Premium, Navionics + and Fishing Hotspots® PRO Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (With Optional Power/NMEA Cable) Ethernet No Ethernet – Wireless Networking (Two Elite Ti2 Max) Card Slots 1 microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic SKU: 000-14661-001 -
Monthly Specials, Sounder-GPS Combos, Sounders and Fishfinders
Lowrance Elite-7 Ti2 7in Touch Screen GPS Combo with 3-in-1 Active Imaging Transducer
Monthly Specials, Sounder-GPS Combos, Sounders and FishfindersLowrance Elite-7 Ti2 7in Touch Screen GPS Combo with 3-in-1 Active Imaging Transducer
Lowrance Elite-7 Ti2 7in Touch Screen Combo with C-Map Australia Wide Charts [Part No.: 000-14641-001] – RRP $1399
With the Elite-7 Ti2, you get more advanced fishfinding features and connectivity, without the premium price. From high-detail Active Imaging™, FishReveal™, built-in Genesis Live real-time mapping and enhanced screen clarity and target separation to features that make your life easier on the water, like an easy-to-use touchscreen, wireless networking, smartphone notifications and trolling motor/Power Pole® integration – Elite Ti2 was designed to help you have an easier time finding fish. Active Imaging 3-in-1 sonar (CHIRP, SideScan and DownScan) and 2-in-1 sonar (SideScan and DownScan) lift Elite-7 Ti2 fishfinding performance to another level, offering offer greater resolution, clarity and contrast at a range unmatched by any fishfinder in its category. Elite-7 Ti2 delivers more powerful navigation features with preloaded C-MAP® Preloaded coastal Australia, New Zealand , C-MAP Easy Routing + Navionics® Autorouting and Genesis Live real-time mapping. New Elite Ti2 wireless networking allows you to share sonar, waypoint and route data wirelessly between Elite Ti2 displays,
Key Features
- Active Imaging™ 3-in-1 (CHIRP/SideScan/DownScan) ready
- Active Imaging™ 2-in-1 (SideScan/DownScan) ready
- C-MAP® Genesis Live
- Smartphone Notifications
- Wireless Networking
- FishReveal™ Smart Target View
- C-MAP® Easy Routing, Navionics Autorouting capability
- Preloaded C-MAP Australia, New Zealand charts
- Easy-to-use, high-resolution 7-inch SolarMAX™ touchscreen display
- Built-in CHIRP and Broadband Sounder®
- Touchscreen control of Power-Pole® anchors, MotorGuide® Xi5 Trolling Motor
- Integrated wireless connectivity
- SonicHub®2 compatible
- NMEA 2000® engine support
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
SPECS
Display
Size 7″/ 178 mm Resolution 800W x 480H Brightness > 1200 nits Touch Screen Yes – Single Touch Viewing Angle 50° top, 60° bottom, 70° left/ right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 22 W (1.6 A at 13.8 V DC) Dimensions
Product Width 8.6”/ 218 mm Product Depth 3.5”/ 64 mm Product Height 5.6”/ 142 mm Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Humidity IEC 60945 Damp heat 66°C (150°F) at 95% relative (48 hr) Shock and Vibration 100 000 cycles of 20 G Sonar
Power Output Max 500W RMS Active Imaging 3-in-1 DownScan Imaging™ at 455 kHz: Max 300 ft / 91 m: SideScan Imaging at 455kHz: Max 300 ft./91 m to each side CHIRP Sonar High Range/200 kHz: 1000 ft / 305 m CHIRP Sonar Med Range/83 kHz: 1000 ft / 305 m Available Sonar Frequencies Low/Mid/High CHIRP, 50/83/200 kHz Broadband, 455/800 kHz SideScan/DownScan imaging Depth Alarm Yes Shallow Alarm Yes Temperature Readings Yes Transducer Type 9-pin Connection, with optional 9-pin to 7-pin adapter; Multiple Selections Lowrance® and Airmar® GPS Navigation
Routes 100 Waypoint Storage 3000 Plot Trails Up to 100 trails with up to 10,000 points per trail GPS Antenna Type 10kHz Internal high-sensitivity WAAS/EGNOS/MSAS GPS Alarms Yes Custom Mapping Optional Americas chart upgrades include C-MAP Insight PRO, C-MAP Lake Insight HD, C-MAP MAX-N, Navionics® HotMaps® Premium, Navionics + and Fishing Hotspots® PRO Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (With Optional Power/NMEA Cable) Ethernet No Ethernet – Wireless Networking (Two Elite Ti2 Max) Card Slots 1 microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic SKU: 000-14641-001 -
Fish Finder, Sounder-GPS Combos, Sounders and Fishfinders
Lowrance Elite-9 Ti2 9in Touch Screen Combo with 3-1 Active Imaging
Fish Finder, Sounder-GPS Combos, Sounders and FishfindersLowrance Elite-9 Ti2 9in Touch Screen Combo with 3-1 Active Imaging
Lowrance Elite-9 Ti2 9in Touch Screen Combo with 3in1 Active Imaging Transducer and Australia Wide C-Map charts.
Details
With the new Elite Ti², you get more advanced fishfinding features and connectivity, without the premium price. From high-detail Active Imaging™ sonar, FishReveal™, built-in Genesis Live real-time mapping and enhanced screen clarity and target separation to features that make your life easier on the water, like an easy-to-use touchscreen, wireless networking, smartphone notifications and trolling motor/Power Pole® integration – Elite Ti² was designed to help you have an easier time finding fish. Active Imaging 3-in-1 sonar (CHIRP, SideScan and DownScan) and 2-in-1 sonar (SideScan and DownScan) lift Elite Ti² fishfinding performance to another level, offering offer greater resolution, clarity and contrast at a range unmatched by any fishfinder in its category. Elite Ti² delivers more powerful navigation features with preloaded C-MAP® AUS/NZ C-MAP Easy Routing + Genesis Live real-time mapping.You will have a much easier time targeting key fishing areas with a C-MAP card. If you would rather create your own maps of a favorite fishing spot or a lake without detailed mapping, take advantage of the built-in Genesis Live real-time mapping capability to create your own, exclusive ½-foot contour maps live on the screen of your Elite Ti² display. New Elite Ti² wireless networking allows you to share sonar, waypoint and route data wirelessly between Elite Ti² displays, removing the need to run cable. With new smartphone notification capability built into Elite Ti², you can keep your eyes on the fish and never miss another text or call; or turn off notifications for uninterrupted fishing.
Key Features
- Active Imaging 3-in-1 Sonar (CHIRP/Side/Down) Ready
- Active Imaging 2-in-1 Sonar (Side/Down) Ready
- C-MAP Genesis Live
- Smartphone Notifications
- Wireless Networking
- FishReveal™ Smart Target View
- PreloadedAUS/NZ Chart card
- C-MAP Easy Routing, Navionics Autorouting capability
- Easy-to-use, high-resolution touchscreen display
- Built-in CHIRP and Broadband Sounder®
- SmartSteer™ control for Xi5 Trolling Motor
- Integrated wireless connectivity
- NMEA 2000® engine support
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
SPECS
Display
Size 9″/ 229 mm Resolution 800W x 480H Brightness > 1200 nits Touch Screen Yes – Single Touch Viewing Angle 50° top, 60° bottom, 70° left/ right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 22 W (1.6 A at 13.8 V DC) Dimensions
Product Width 10.5”/ 267 mm Product Depth 2.7”/ 69 mm Product Height 6.2”/ 157 mm Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Humidity IEC 60945 Damp heat 66°C (150°F) at 95% relative (48 hr) Shock and Vibration 100 000 cycles of 20 G Sonar
Power Output Max 500W RMS Active Imaging 3-in-1 DownScan Imaging™ at 455 kHz: Max 300 ft / 91 m: SideScan Imaging at 455kHz: Max 300 ft./91 m to each side CHIRP Sonar High Range/200 kHz: 1000 ft / 305 m CHIRP Sonar Med Range/83 kHz: 1000 ft / 305 m Available Sonar Frequencies Low/Mid/High CHIRP, 50/83/200 kHz Broadband, 455/800 kHz SideScan/DownScan imaging Depth Alarm Yes Shallow Alarm Yes Temperature Readings Yes Transducer Type 9-pin Connection, with optional 9-pin to 7-pin adapter; Multiple Selections Lowrance® and Airmar® GPS Navigation
Routes 100 Waypoint Storage 3000 Plot Trails Up to 100 trails with up to 10,000 points per trail GPS Antenna Type 10kHz Internal high-sensitivity WAAS/EGNOS/MSAS GPS Alarms Yes Custom Mapping Optional Americas chart upgrades include C-MAP Insight PRO, C-MAP Lake Insight HD, C-MAP MAX-N, Navionics® HotMaps® Premium, Navionics + and Fishing Hotspots® PRO Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (With Optional Power/NMEA Cable) Ethernet No Ethernet – Wireless Networking (Two Elite Ti2 Max) Card Slots 1 microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic SKU: 000-14651-001 -
Fish Finder, Sounder-GPS Combos, Sounders and Fishfinders
Lowrance HDS-12 LIVE 12in Touch Combo
Lowrance HDS-12 Live 12in Touch Combo Unit [Part Number: 000-14907-001] – RRP $4799
What’s included:
Lowrance HDS-12 Live 12in Touch Touchscreen Sounder-Fishfinder/GPS-Chartplotter Combo (Display) [Part Number: 000-14907-001] – RRP $4799
DETAILS
The latest and greatest from Lowrance! Introducing to you the all new Lowrance HDS LIVE 12! This has the most advanced sonar technology with dual channel 1kw chirp capability, quad core processors, ultra bright SolarMAX HD Screen, Built in Structure Scan HD, Video input and output, WIFI, Bluetooth and smartphone Integration .
Unlike other Lowrance HDS models and fish finders on the market, The Lowrance HDS Live comes with Australia and New Zealand Wide Built in C-map charting, giving you the best charting possible built into the unit with no extras to pay! Marry this up with the all new 3-in-1 Active imaging transducer and you’ll be set and ready to go fishing!
Some new cool features which are included in the new HDS Live are;
- NEW Active Imaging™
- StructureScan® 3D
- Active Imaging with FishReveal™
- LiveSight™ real-time sonar
- C-MAP® Enhanced mapping with 1-foot contours
- C-MAP® Easy Routing
- Navionics® Autorouting and C-MAP Genesis Live mapping
- Onscreen text messages and call notifications
- LiveCast™ smartphone connection, which allows you to display video, Google Maps and fishing data on your fishfinder display
Key Features
- Active Imaging 3-in-1 Transducer required (not included)
- NEW! Active Imaging™ 3-in-1 (CHIRP/SideScan/DownScan)
- Active Imaging 2-in-1 ready
- LiveSight™ real-time sonar compatible
- Smartphone notifications
- C-MAP Genesis Live onscreen mapping
- StructureScan® 3D with Active Imaging enhancements – Coming Fall 2018
- High-performance quad-core processor
- FishReveal Smart Target View
- Full high-definition HDS SolarMAX™ HD multi-touch screen with the widest range of viewing angles – viewable even through polarized sunglasses
- Preloaded high-detail C-MAP® US Enhanced charts with 1-foot contours on 4,000-plus lakes
- C-MAP Easy Routing, Navionics Autorouting capability
- Dual-Channel CHIRP – dual sonar-range coverage from the same transducer
- Live Network Sonar – cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers
- Wireless and Bluetooth® connectivity
- Heat Map feature allows anglers to see trends in water temperature changes to quickly target key fishing areas
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
- Built-in CHIRP and Broadband Sounder™
- SmartSteer™ control for Xi5 Trolling Motor and Outboard Pilot
- Radar and SonicHub®2 audio server connectivity
- NMEA 2000® engine support
- Optional mapping upgrades include C-MAP, Navionics® and more
Lowrance HDS LIVE Advantages:
-
- Best Screens: You will have an easier time viewing fish, structure and bottom detail on bright and clear SolarMAX™ HD screens that offers clean and crisp views from any angle, in direct sunlight – even through polarized sunglasses.
- Easy and Efficient Interface: On-the-water adjustments will be quicker and easier with the refreshed HDS interface designed with a simpler feature layout to deliver next-level ease of use and efficiency.
-
- Active Imaging: See structure and cover with a new level of refined detail at a range unmatched by anyone else with new, Lowrance Active Imaging. Active Imaging is available with 3-in-1 transducer (CHIRP, SideScan and DownScan Imaging) and Active Imaging 2-in-1 transducer (SideScan and DownScan Imaging) options.
-
- View all Structure Imaging – Side-by-Side: For the first time, you can get a side-by-side view of all your structure imaging technology with the enhanced capabilities of HDS LIVE, which supports simultaneous viewing of StructureScan 3D, SideScan and DownScan Imaging™ panels.
-
- Most Advanced Fishfinder Technology: Simultaneously view CHIRP Sonar with Active Imaging to get the best possible view of fish and structure, below and to the sides of your boat.
-
- LiveSight: Get live views of fish movements across the bottom, in and around cover and structure with new, revolutionary LiveSight™ sonar. Capable of showing views beneath, or in front of your boat, LiveSight™ is at its best when trolling or fishing from a single spot. HDS LIVE comes LiveSight™ ready, so all you need to do is mount the LiveSight™ transducer and get after the fish.
-
- C-MAP Genesis LIVE: Create your own high-definition 1/2-foot contour maps – in real time – on your HDS LIVE screen with C-MAP Genesis Live.
-
- Smartphone Notifications: Keep your eyes on the fish and never miss an important text or call with smartphone notifications built into HDS LIVE. Turn off phone notifications for uninterrupted fishing, or leave them on to receive popup notifications on the screen of your HDS LIVE display.
-
- LiveCast smartphone integration: You no longer have to choose between watching the big game and spending a day on the water with LiveCast™ smartphone integration. Watch video, view Google maps and fishing data on the high-resolution screen of your HDS LIVE display via the HDMI connection on HDS LIVE 12. View data from your smartphone and keep your eye on the fish with a LiveCast-sonar split screen.
-
- FishReveal™ Smart Target View: Makes fish easier to see on DownScan Imaging™ by combining crystal-clear CHIRP sonar fish targets with superior, high-resolution views of bottom detail, structure and bait fish.
-
- High Performance Processor: Whether panning the chart, tracking back through your sonar history or creating a Genesis LIVE map, you will get responsive, smooth operation with no lag from the quad-core processor at the heart of HDS LIVE. The high- performance processor can easily drive today’s technology, like Active Imaging, LiveSight sonar, Genesis Live, StructureMap, Live Network sonar with power to spare for future innovations.
-
- New, Modern, Low-Profile Design: Enhance the look of your console with the new, zero-edge glass design of HDS LIVE, featuring the exceptional crispness, vibrant images and extreme viewing angles of SolarMAX™ HD technology. Create clean, sleek look at the console with an HDS LIVE flush mount.
-
- Larger, Programmable Keys: It’s easier than ever to quickly access functions with the larger keys on HDS LIVE — no matter the conditions; plus with four programmable keys, you can set up one-touch access to the features you use the most
-
- 6-way Split Screen View : See more information — all at the same time — with the new, six-screen split offered on HDS12 LIVE fishfinder/chartplotters.
-
- Live Network Sonar: Cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers. Get sonar views from bow-mounted transducer and the in-hull or transom-mounted transducer at the same time on the same display.
-
- Dual-Channel CHIRP: Deep water and trolling anglers will never miss a fish, watching two Lowrance CHIRP frequencies at the same time via a dual-channel CHIRP split screen. Run a High CHIRP panel for the best target separation close to the bottom or in tight schools, a Medium CHIRP panel to cover the widest area – ideal for watching bait schools under a transducer in shallow water, or go deeper with a Low CHIRP panel to cover more of the water column.
-
- C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass, shoals and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts.
-
- C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, where the colors used for land, docks, anchorage areas, water, and channels are nicely differentiated and water contour lines are distinct. That makes it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land. The color scheme is much easier on the eye.
-
- Wireless Connectivity: Integrated wireless connectivity with the Lowrance® LINK App and other onboard devices, allows you to download software updates and custom C-MAP® Genesis maps directly to the display and offers wireless smartphone viewing/tablet control of HDS Carbon displays.
- Network All Components: Plug-and-play compatibility with Lowrance performance modules, including Broadband Radar™, SonicHub®2 Marine Audio, SiriusXM® Marine Weather and audio, Class B AIS and DSC VHF, as well as industry-leading technologies, like Mercury® VesselView® Link, Bluetooth® control of Power-Pole® shallow water anchors equipped with the C-Monster™ Control System and the SmartSteer™ interface, featuring control of MotorGuide® Xi5 trolling motor and the Lowrance® Outboard Pilot.
Display
Resolution 1280 x 800
Brightness > 1200 nits
Type 12″ IPS
Touch Screen Multi-Touch
Viewing Angle 80° top/bottom, 80° left/right
Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max)
Power Consumption – MAX 49.68 W (3.6A at 13.8 V DC)
Recommended Fuse 5 A
Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F)
Storage Temp Range -20°C to +60°C (4°F to 140°F)
Waterproof Rating IPX6 and IPX7
ConnectionsNMEA 2000 1 port (Micro-C)
NMEA 0183 1 port (In Power Cable)
Ethernet 2 ports
HDMI Video In 1 port
Analog Video In 1 port (optional cable)
USB 1 port (USB-A 5V DC, 1.5A)
Card Slots 2 slots microSD
Wireless Built-in 802.11 b/g/n
Bluetooth Bluetooth 4.0 with support for Bluetooth ClassicAVAILABLE OPTION 1:
Active Imaging 3-IN-1 Transducer: Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation.7.6 m (25 ft) cable with 9 pin connector. Part Number (000-14489-001)
Active Imaging Transducers
- Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
- Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
- Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation
- Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
- Active Imaging utilizes the latest techniques in sonar signal generation
- Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
- Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features
- Active Imaging sonar offers no compromise high resolution detail to users
- 800kHz operation covers many use cases and ranges.
- With 800kHz range and resolution capabilities users do not need to choose between seeing in
High detail or seeing far.
- High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
- Active Imaging 3-IN-1 transducers combine industry leading CHIRP sonar with new Active Imaging Side and Down views giving users total coverage with award winning sonar
- Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
AVAILABLE OPTION 2:
Lowrance/Simrad StructureScan 3D Transducer and Module [Lowrance/Simrad Part Number: 000-12395-001] – RRP $1399
Lowrance StructureScan® 3D allows anglers to see fish, structure and bottom contour in a stunning three-dimensional view. StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high-resolution, 180-degree, three-dimensional view beneath your boat. With this unique imaging view, anglers gain a better understanding of where fish and structure are located in relation to their boat. The picture-like, three-dimensional views are displayed on the Lowrance HDS Gen3 series of fishfinder/chartplotters, when used in combination with the SideScan 3D Skimmer® transducer and StructureScan® 3D module.
* StructureScan® 3D
StructureScan 3D is powered by a multi-beam sonar technology that produces revealing images with stunning detail by converting scans of underwater terrain and fish-holding structure into high-resolution, 180-degree, three-dimensional views.* Easy-to-Understand Sonar Images
View 3D images from any angle with ScanTrack™ pan-tilt-rotate control using on-screen touch commands and easy-to-use, preset viewing positions.* Find Key Fishing Areas Faster
StructureScan® 3D allows anglers to more easily understand where fish and fish-holding structure are located in relation to their boat. By slowly idling over a potential fishing area with the wide, 180-degree scanning range, anglers can quickly search for key areas and cover ─ such as abrupt depth changes, points, ditches, rockpiles, brushpiles, weedbeds standing timber, wrecks and more.* Unrivaled SideScan Image Clarity
To ensure the clearest possible SideScan views, the StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance.* High Definition (HD) and Super-Wide 3D Scanning
The contours below the water’s surface can be shown to the sides of the boat ─ up to 600 feet port and starboard ─ with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including two-dimensional DownScan Imaging™ and StructureScan® HD, and the new, realistic three-dimensional views. Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively.
* Leading Edge™ Scanning Reference
The Leading Edge™ scanning reference provides a clear graphical illustration of sonar beams as they intersect with bottom contours. The depth and range of the most recently scanned area are shown as red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth.
* SelectScan™ Target Identification
SelectScan™ automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before.
* Vertical Enhancement Control
Vertical Enhancement is a user-selectable scale that will apply on-screen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. Vertical Enhancement makes even the slightest depth changes more visible.
* Waypoint Overlay
Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover.* Automatic 3D Image Settings
Fine-tuned 3D image settings are set by your HDS Gen 3 default configuration and StructureScan 3D Module. Adjustments can be made to Surface Clarity and Contrast settings using the on-screen slider-bar. Surface Clarity reduces on-screen surface clutter, by decreasing the sensitivity of the receiver near the surface. Contrast lightens/darkens the color palette to make fish and structure easier to see.* Ethernet Connectivity
Ethernet ports allow connectivity for up to three networked devices.* Enhanced SideScan Skimmer® Transducer Design
SPECIFICATIONS:
Overview
* Transmit Power Max RMS: 500W
* Cable Length 20 ft/ 6m
* Trandsucer Frequencies Enhanced 455 kHz
Sonar
* 600 feet
* EchoSounder Frequencies Enhanced 455 kHz
* EchoSounder Output Power Max RMS: 500W
* SideScan Imaging:
– Max Range: 600 ft./183 m
– Track bottom: 35 mph/56 kph
– Mark objects: 15 mph/24 kph
– Optimum imaging: 2-8 mph/3-13 kph
* DownScan Imaging™
– Max Depth: 300 ft / 92 m
– Track bottom: 35 mph/56 kph
– Mark objects: 2-8 mph/3-13 kph
– Optimum imaging: 2-8 mph/3-13 kph
Technical/Environmental
* Product Weight 1.8 lbs \ 0.816 kg
* Product Length 8.26” \ 210 mm
Power
* Power Consumption Max: .75A, Typical: .60A, Inrush: 4.7A pk
* Power Supply (Supply Voltage) 12 vDC
* Input Voltage 10V – 17 VDC
Other
* Cable 20 ft/ 6m
* Part #: 000-12395-001
* AUD RRP: $1,399.00WHAT’S IN THE BOX:
* Lowrance/Simrad StructureScan 3D Transom Mount Transducer (Part Number Individually: 000-12396-001)
* Lowrance/Simrad StructureScan 3D Module (Part Number Individually: 000-12397-001)
* Power Cable (Part Number Individually: 000-00128-001)
* 15ft Ethernet Cable (Part Number Individually: 000-00127-29)
* DocumentationAVAILABLE OPTION 3:
Navionics Gold Plus Australia Wide and New Zealand Boat Navigation Chart MSD/PLN50XG (also known as XL9) – suits Lowrance, Simrad, Raymarine & other popular units – RRP $368.55 *NEW*
Navionics Gold Plus is the most popular chart with boaters and fishermen all over the world, offering the largest coverage areas along with the absolute best detail. A Gold chart can seamlessly cover an entire continent and yet be able to zoom down to a resolution of 1 meter (3ft), with an abundance of data derived from the best available sources. Features include a clear, easy to use, familiar paper-like display of all detail available from the best marine nautical charts, plus:
* Tides & currents
* Port plans
* Navigation aids
* Marsh areas
* Spot soundings and depth contours
* Detailed Marine Park Zones (i.e. Green, Yellow Zones) of Moreton Bay Marine Park & Great Barrier Reef Marine Park (GBRMP)
* Further the Plus card also features a contour line mode for compatible units* Auto Routing Feature included
Coverage:
Australia wide including Norfolk Islands. As well as New Zealand & Pacific.
Suitability:
Suits current model plotters that accept Micro SD or SD charts. Including:
* Lowrance Elite Range
* Lowrance HDS Range
* Raymarine Units
* Humminbird Units
* Simrad NSS evo2 UnitsIf you are unsure whether this chart will suit your unit, just let us know the model of your unit and we can assist you in getting the right chart to suit your needs.
*These are genuine Navionics Charts that are brand new, unused and come with full Australian Warranty.
Warranty:
We are an authorised Australian Navionics retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Navionics chart is purchased overseas or from a non-authorised Navionics retailer it may not work in your unit, as we have found counterfeit cards can corrupt your hardware.*Specifications and features from suppliers’ information. If you have any questions or require any advice just let us know we are happy to help.
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14907-001 -
Lowrance, Sounder-GPS Combos, Sounders and Fishfinders
Lowrance HDS-16 LIVE 16in Touch Combo
Lowrance HDS-16 Live 16in Touch Touchscreen Sounder-Fishfinder/GPS-Chartplotter Combo
The latest and greatest from Lowrance! Introducing to you the all new Lowrance HDS LIVE 16! This has the most advanced sonar technology with dual channel 1kw chirp capability, quad core processors, ultra bright SolarMAX HD Screen, Built in Structure Scan HD, Video input and output, WIFI, Bluetooth and smartphone Integration .
Unlike other Lowrance HDS models and fish finders on the market, The Lowrance HDS Live comes with Australia and New Zealand Wide Built in C-map charting, giving you the best charting possible built into the unit with no extras to pay! Marry this up with the all new 3-in-1 Active imaging transducer and you’ll be set and ready to go fishing!
Some new cool features which are included in the new HDS Live are;
- NEW Active Imaging™
- StructureScan® 3D
- Active Imaging with FishReveal™
- LiveSight™ real-time sonar
- C-MAP® Enhanced mapping with 1-foot contours
- C-MAP® Easy Routing
- Navionics® Autorouting and C-MAP Genesis Live mapping
- Onscreen text messages and call notifications
- LiveCast™ smartphone connection, which allows you to display video, Google Maps and fishing data on your fishfinder display
Key Features
- Active Imaging 3-in-1 Transducer required (not included)
- NEW! Active Imaging™ 3-in-1 (CHIRP/SideScan/DownScan)
- Active Imaging 2-in-1 ready
- LiveSight™ real-time sonar compatible
- Smartphone notifications
- C-MAP Genesis Live onscreen mapping
- StructureScan® 3D with Active Imaging enhancements – Coming Fall 2018
- High-performance quad-core processor
- FishReveal Smart Target View
- Full high-definition HDS SolarMAX™ HD multi-touch screen with the widest range of viewing angles – viewable even through polarized sunglasses
- Preloaded high-detail C-MAP® US Enhanced charts with 1-foot contours on 4,000-plus lakes
- C-MAP Easy Routing, Navionics Autorouting capability
- Dual-Channel CHIRP – dual sonar-range coverage from the same transducer
- Live Network Sonar – cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers
- Wireless and Bluetooth® connectivity
- Heat Map feature allows anglers to see trends in water temperature changes to quickly target key fishing areas
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
- Built-in CHIRP and Broadband Sounder™
- SmartSteer™ control for Xi5 Trolling Motor and Outboard Pilot
- Radar and SonicHub®2 audio server connectivity
- NMEA 2000® engine support
- Optional mapping upgrades include C-MAP, Navionics® and more
Lowrance HDS LIVE Advantages:
Best Screens: You will have an easier time viewing fish, structure and bottom detail on bright and clear SolarMAX™ HD screens that offers clean and crisp views from any angle, in direct sunlight – even through polarized sunglasses.
Easy and Efficient Interface: On-the-water adjustments will be quicker and easier with the refreshed HDS interface designed with a simpler feature layout to deliver next-level ease of use and efficiency.
Active Imaging: See structure and cover with a new level of refined detail at a range unmatched by anyone else with new, Lowrance Active Imaging. Active Imaging is available with 3-in-1 transducer (CHIRP, SideScan and DownScan Imaging) and Active Imaging 2-in-1 transducer (SideScan and DownScan Imaging) options.
View all Structure Imaging – Side-by-Side: For the first time, you can get a side-by-side view of all your structure imaging technology with the enhanced capabilities of HDS LIVE, which supports simultaneous viewing of StructureScan 3D, SideScan and DownScan Imaging™ panels.
Most Advanced Fishfinder Technology: Simultaneously view CHIRP Sonar with Active Imaging to get the best possible view of fish and structure, below and to the sides of your boat.
LiveSight: Get live views of fish movements across the bottom, in and around cover and structure with new, revolutionary LiveSight™ sonar. Capable of showing views beneath, or in front of your boat, LiveSight™ is at its best when trolling or fishing from a single spot. HDS LIVE comes LiveSight™ ready, so all you need to do is mount the LiveSight™ transducer and get after the fish.
C-MAP Genesis LIVE: Create your own high-definition 1/2-foot contour maps – in real time – on your HDS LIVE screen with C-MAP Genesis Live.
Smartphone Notifications: Keep your eyes on the fish and never miss an important text or call with smartphone notifications built into HDS LIVE. Turn off phone notifications for uninterrupted fishing, or leave them on to receive popup notifications on the screen of your HDS LIVE display.
LiveCast smartphone integration: You no longer have to choose between watching the big game and spending a day on the water with LiveCast™ smartphone integration. Watch video, view Google maps and fishing data in full high-definition on the screen of your HDS LIVE 16 display via the HDMI connection. View data from your smartphone and keep your eye on the fish with a LiveCast-sonar split screen.
FishReveal™ Smart Target View: Makes fish easier to see on DownScan Imaging™ by combining crystal-clear CHIRP sonar fish targets with superior, high-resolution views of bottom detail, structure and bait fish.High Performance Processor: Whether panning the chart, tracking back through your sonar history or creating a Genesis LIVE map, you will get responsive, smooth operation with no lag from the quad-core processor at the heart of HDS LIVE. The high- performance processor can easily drive today’s technology, like Active Imaging, LiveSight sonar, Genesis Live, StructureMap, Live Network sonar with power to spare for future innovations.
New, Modern, Low-Profile Design: Enhance the look of your console with the new, zero-edge glass design of HDS LIVE, featuring the exceptional crispness, vibrant images and extreme viewing angles of SolarMAX™ HD technology. Create clean, sleek look at the console with an HDS LIVE flush mount.
Larger, Programmable Keys: It’s easier than ever to quickly access functions with the larger keys on HDS LIVE — no matter the conditions; plus with four programmable keys, you can set up one-touch access to the features you use the most
6-way Split Screen View: See more information — all at the same time — with the new, six-screen split offered on HDS16 LIVE fishfinder/chartplotters.
Live Network Sonar: Cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers. Get sonar views from bow-mounted transducer and the in-hull or transom-mounted transducer at the same time on the same display.Dual-Channel CHIRP: Deep water and trolling anglers will never miss a fish, watching two Lowrance CHIRP frequencies at the same time via a dual-channel CHIRP split screen. Run a High CHIRP panel for the best target separation close to the bottom or in tight schools, a Medium CHIRP panel to cover the widest area – ideal for watching bait schools under a transducer in shallow water, or go deeper with a Low CHIRP panel to cover more of the water column.
C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass, shoals and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts.
C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, where the colors used for land, docks, anchorage areas, water, and channels are nicely differentiated and water contour lines are distinct. That makes it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land. The color scheme is much easier on the eye.
Wireless Connectivity: Integrated wireless connectivity with the Lowrance® LINK App and other onboard devices, allows you to download software updates and custom C-MAP® Genesis maps directly to the display and offers wireless smartphone viewing/tablet control of HDS Carbon displays.
Network All Components: Plug-and-play compatibility with Lowrance performance modules, including Broadband Radar™, SonicHub®2 Marine Audio, SiriusXM® Marine Weather and audio, Class B AIS and DSC VHF, as well as industry-leading technologies, like Mercury® VesselView® Link, Bluetooth® control of Power-Pole® shallow water anchors equipped with the C-Monster™ Control System and the SmartSteer™ interface, featuring control of MotorGuide® Xi5 trolling motor and the Lowrance® Outboard Pilot.
Compatible
- Active Imaging 3-in-1
- StructureScan 3D with Active Imaging
- LiveSight Sonar
- Point-1 Antenna support (external)
- Precision-9 Compass compatibility
- Broadband 4G Radar, 000-10419-001
- Broadband 3G Radar, 000-10418-001
- Outboard Pilot Cable Steer Pack, 000-11749-001
- Outboard Pilot Hydraulic Pack, 000-11748-001
- SonicHub2 Marine Audio Server Pack, 000-12301-001
- WM-3 SiriusXM Weather and Radio Module, 000-11076-001
- Connects and communicates with HDS Carbon and HDS Gen3 multifunction displays
- Dual Ethernet networking port
- Micro-C connection for NMEA 2000® devices
- Video input via optional adapter cable
- NMEA 2000® Starter Kit, 000-0124-69
- Supported by Lowrance Service & Support program
*Some features requires additional component purchase.
Display
Resolution 1920 x 1080 Brightness > 1200 nits Type 16” IPS Touch Screen Multi-Touch Viewing Angle 80° top/bottom, 80° left/right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 67.62 W (4.9 A at 13.8 V DC) Recommended Fuse 6.5 A Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (In Power Cable) Ethernet 2 ports HDMI Video In 1 port Analog Video In 1 port (optional cable) USB 1 port (USB-A 5V DC, 1.5A) Card Slots 2 slots microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic AVAILABLE OPTION 1:
Active Imaging 3-IN-1 Transducer: Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation.7.6 m (25 ft) cable with 9 pin connector. Part Number (000-14489-001)
Active Imaging Transducers
- Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
- Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
- Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation
- Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
- Active Imaging utilizes the latest techniques in sonar signal generation
- Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
- Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features
- Active Imaging sonar offers no compromise high resolution detail to users
- 800kHz operation covers many use cases and ranges.
- With 800kHz range and resolution capabilities users do not need to choose between seeing in
High detail for seeing far.
- High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
- Active Imaging 3-IN-1 transducers combine industry leading CHIRP sonar with new Active Imaging Side and Down views giving users total coverage with award winning sonar
- Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
AVAILABLE OPTION 2:
Lowrance/Simrad StructureScan 3D Transducer and Module [Lowrance/Simrad Part Number: 000-12395-001] – RRP $1399
Lowrance StructureScan® 3D allows anglers to see fish, structure and bottom contour in a stunning three-dimensional view. StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high-resolution, 180-degree, three-dimensional view beneath your boat. With this unique imaging view, anglers gain a better understanding of where fish and structure are located in relation to their boat. The picture-like, three-dimensional views are displayed on the Lowrance HDS Gen3 series of fishfinder/chartplotters, when used in combination with the SideScan 3D Skimmer® transducer and StructureScan® 3D module.
StructureScan® 3D
StructureScan 3D is powered by a multi-beam sonar technology that produces revealing images with stunning detail by converting scans of underwater terrain and fish-holding structure into high-resolution, 180-degree, three-dimensional views.Easy-to-Understand Sonar Images
View 3D images from any angle with ScanTrack™ pan-tilt-rotate control using on-screen touch commands and easy-to-use, preset viewing positions.Find Key Fishing Areas Faster
StructureScan® 3D allows anglers to more easily understand where fish and fish-holding structure are located in relation to their boat. By slowly idling over a potential fishing area with the wide, 180-degree scanning range, anglers can quickly search for key areas and cover ─ such as abrupt depth changes, points, ditches, rockpiles, brushpiles, weedbeds standing timber, wrecks and more.Unrivaled SideScan Image Clarity
To ensure the clearest possible SideScan views, the StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance.High Definition (HD) and Super-Wide 3D Scanning
The contours below the water’s surface can be shown to the sides of the boat ─ up to 600 feet port and starboard ─ with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including two-dimensional DownScan Imaging™ and StructureScan® HD, and the new, realistic three-dimensional views. Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively.
Leading Edge™ Scanning Reference
The Leading Edge™ scanning reference provides a clear graphical illustration of sonar beams as they intersect with bottom contours. The depth and range of the most recently scanned area are shown as red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth.SelectScan™ Target Identification
SelectScan™ automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before.Vertical Enhancement Control
Vertical Enhancement is a user-selectable scale that will apply on-screen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. Vertical Enhancement makes even the slightest depth changes more visible.Waypoint Overlay
Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover.Automatic 3D Image Settings
Fine-tuned 3D image settings are set by your HDS Gen 3 default configuration and StructureScan 3D Module. Adjustments can be made to Surface Clarity and Contrast settings using the on-screen slider-bar. Surface Clarity reduces on-screen surface clutter, by decreasing the sensitivity of the receiver near the surface. Contrast lightens/darkens the color palette to make fish and structure easier to see.Ethernet Connectivity
Ethernet ports allow connectivity for up to three networked devices.Enhanced SideScan Skimmer® Transducer Design
SPECIFICATIONS:
Overview- Transmit Power Max RMS: 500W
- Cable Length 20 ft/ 6m
- Trandsucer Frequencies Enhanced 455 kHz
Sonar
- 600 feet
- EchoSounder Frequencies Enhanced 455 kHz
- EchoSounder Output Power Max RMS: 500W
- SideScan Imaging:
- Max Range: 600 ft./183
- Track bottom: 35 mph/56 kph
- Mark objects: 15 mph/24 kph
- Optimum imaging: 2-8 mph/3-13 kph
- Max Range: 600 ft./183
- DownScan Imaging
- Max Depth: 300 ft / 92
- Track bottom: 35 mph/56 kph
- Mark objects: 2-8 mph/3-13 kph
- Optimum imaging: 2-8 mph/3-13 kph
- Max Depth: 300 ft / 92
Technical/Environmental
- Product Weight 1.8 lbs \ 0.816 kg
- Product Length 8.26” \ 210 mm
Power
- Power Consumption Max: .75A, Typical: .60A, Inrush: 4.7A pk
- Power Supply (Supply Voltage) 12 vDC
- Input Voltage 10V – 17 VDC
Other
- Cable 20 ft/ 6m
- Part #: 000-12395-001
- AUD RRP: $1,399.00
WHAT’S IN THE BOX:
- Lowrance/Simrad StructureScan 3D Transom Mount Transducer (Part Number Individually: 000-12396-001)
- Lowrance/Simrad StructureScan 3D Module (Part Number Individually: 000-12397-001)
- Power Cable (Part Number Individually: 000-00128-001)
- 15ft Ethernet Cable (Part Number Individually: 000-00127-29)
- Documentation
AVAILABLE OPTION 3:
Navionics Gold Plus Australia Wide and New Zealand Boat Navigation Chart MSD/PLN50XG (also known as XL9) – suits Lowrance, Simrad, Raymarine & other popular units – RRP $368.55 *NEW*
Navionics Gold Plus is the most popular chart with boaters and fishermen all over the world, offering the largest coverage areas along with the absolute best detail. A Gold chart can seamlessly cover an entire continent and yet be able to zoom down to a resolution of 1 meter (3ft), with an abundance of data derived from the best available sources. Features include a clear, easy to use, familiar paper-like display of all detail available from the best marine nautical charts, plus:
- Tides & currents
- Port plans
- Navigation aids
- Marsh areas
- Spot soundings and depth contours
- Detailed Marine Park Zones (i.e. Green, Yellow Zones) of Moreton Bay Marine Park & Great Barrier Reef Marine Park (GBRMP)
- Further the Plus card also features a contour line mode for compatible units
- Auto Routing Feature included
Coverage:
Australia wide including Norfolk Islands. As well as New Zealand & Pacific.
Suitability:
Suits current model plotters that accept Micro SD or SD charts. Including:
* Lowrance Elite Range
* Lowrance HDS Range
* Raymarine Units
* Humminbird Units
* Simrad NSS evo UnitsIf you are unsure whether this chart will suit your unit, just let us know the model of your unit and we can assist you in getting the right chart to suit your needs.
*These are genuine Navionics Charts that are brand new, unused and come with full Australian Warranty.
Warranty:
We are an authorised Australian Navionics retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Navionics chart is purchased overseas or from a non-authorised Navionics retailer it may not work in your unit, as we have found counterfeit cards can corrupt your hardware.*Specifications and features from suppliers’ information. If you have any questions or require any advice just let us know we are happy to help.
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
Visit https://www.northsidemarine.com.au/
https://www.lowrance.com/en-au/SKU: 000-14909-001 -
Sounder-GPS Combos, Sounders and Fishfinders
Lowrance HDS-7 LIVE 7in Touch Combo
1. Lowrance HDS-7 Live in Touch Touchscreen Sounder-Fishfinder/GPS-Chartplotter Combo (Display) – RRP $1779
DETAILS
The latest and greatest from Lowrance! Introducing to you the all new Lowrance HDS LIVE 7! This has the most advanced sonar technology with dual channel 1kw chirp capability, quad core processors, ultra bright SolarMAX HD Screen, Built in Structure Scan HD, Video input and output, WIFI, Bluetooth and smartphone Integration .
Unlike other Lowrance HDS models and fish finders on the market, The Lowrance HDS Live comes with Australia and New Zealand Wide Built in C-map charting, giving you the best charting possible built into the unit with no extras to pay! Marry this up with the all new 3-in-1 Active imaging transducer and you’ll be set and ready to go fishing!
Some new cool features which are included in the new HDS Live are;
- NEW Active Imaging™
- StructureScan® 3D
- Active Imaging with FishReveal™
- LiveSight™ real-time sonar
- C-MAP® Enhanced mapping with 1-foot contours
- C-MAP® Easy Routing
- Navionics® Autorouting and C-MAP Genesis Live mapping
- Onscreen text messages and call notifications
- LiveCast™ smartphone connection, which allows you to display video, Google Maps and fishing data on your fishfinder display
Key Features
- Active Imaging 3-in-1 Transducer required (not included)
- NEW! Active Imaging™ 3-in-1 (CHIRP/SideScan/DownScan)
- Active Imaging 2-in-1 ready
- LiveSight™ real-time sonar compatible
- Smartphone notifications
- C-MAP Genesis Live onscreen mapping
- StructureScan® 3D with Active Imaging enhancements – Coming Fall 2018
- High-performance quad-core processor
- FishReveal Smart Target View
- Full high-definition HDS SolarMAX™ HD multi-touch screen with the widest range of viewing angles – viewable even through polarized sunglasses
- Preloaded high-detail C-MAP® US Enhanced charts with 1-foot contours on 4,000-plus lakes
- C-MAP Easy Routing, Navionics Autorouting capability
- Dual-Channel CHIRP – dual sonar-range coverage from the same transducer
- Live Network Sonar – cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers
- Wireless and Bluetooth® connectivity
- Heat Map feature allows anglers to see trends in water temperature changes to quickly target key fishing areas
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
- Built-in CHIRP and Broadband Sounder™
- SmartSteer™ control for Xi5 Trolling Motor and Outboard Pilot
- Radar and SonicHub®2 audio server connectivity
- NMEA 2000® engine support
- Optional mapping upgrades include C-MAP, Navionics® and more
Lowrance HDS LIVE Advantages:
- Best Screens: You will have an easier time viewing fish, structure and bottom detail on bright and clear SolarMAX™ HD screens that offers clean and crisp views from any angle, in direct sunlight – even through polarized sunglasses.
Easy and Efficient Interface: On-the-water adjustments will be quicker and easier with the refreshed HDS interface designed with a simpler feature layout to deliver next-level ease of use and efficiency. - Active Imaging: See structure and cover with a new level of refined detail at a range unmatched by anyone else with new, Lowrance Active Imaging. Active Imaging is available with 3-in-1 transducer (CHIRP, SideScan and DownScan Imaging) and Active Imaging 2-in-1 transducer (SideScan and DownScan Imaging) options.
- View all Structure Imaging – Side-by-Side: For the first time, you can get a side-by-side view of all your structure imaging technology with the enhanced capabilities of HDS LIVE, which supports simultaneous viewing of StructureScan 3D, SideScan and DownScan Imaging™ panels.
- Most Advanced Fishfinder Technology: Simultaneously view CHIRP Sonar with Active Imaging® 3D to get the best possible view of fish and structure, below and to the sides of your boat.
- LiveSight: Get live views of fish movements across the bottom, in and around cover and structure with new, revolutionary LiveSight™ sonar. Capable of showing views beneath, or in front of your boat, LiveSight™ is at its best when trolling at very slow speeds or fishing from a single spot. HDS LIVE comes LiveSight™ ready, so all you need to do is mount the LiveSight™ transducer and get after the fish.
- C-MAP Genesis LIVE: Create your own high-definition 1/2-foot contour maps – in real time – on your HDS LIVE screen with C-MAP Genesis Live.
- Smartphone Notifications: Keep your eyes on the fish and never miss an important text or call with smartphone notifications built into HDS LIVE. Turn off phone notifications for uninterrupted fishing, or leave them on to receive popup notifications on the screen of your HDS LIVE display.
- FishReveal™ Smart Target View: Makes fish easier to see on DownScan Imaging™ by combining crystal-clear CHIRP sonar fish targets with superior, high-resolution views of bottom detail, structure and bait fish.
- High Performance Processor: Whether panning the chart, tracking back through your sonar history or creating a Genesis LIVE map, you will get responsive, smooth operation with no lag from the dual-core processor at the heart of HDS LIVE. The high- performance processor can easily drive today’s technology, like Active Imaging 3D, LiveSight sonar, Genesis Live, StructureMap, Live Network sonar with power to spare for future innovations.
- New, Modern, Low-Profile Design: Enhance the look of your console with the new, zero-edge glass design of HDS LIVE, featuring the exceptional crispness, vibrant images and extreme viewing angles of SolarMAX™ HD technology. Create clean, sleek look at the console with an HDS LIVE flush mount.
- Live Network Sonar: Cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers. Get sonar views from bow-mounted transducer and the in-hull or transom-mounted transducer at the same time on the same display.
- Dual-Channel CHIRP: Deep water and trolling anglers will never miss a fish, watching two Lowrance CHIRP frequencies at the same time via a dual-channel CHIRP split screen. Run a High CHIRP panel for the best target separation close to the bottom or in tight schools, a Medium CHIRP panel to cover the widest area – ideal for watching bait schools under a transducer in shallow water, or go deeper with a Low CHIRP panel to cover more of the water column.
- C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass, shoals and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts.
- C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, where the colors used for land, docks, anchorage areas, water, and channels are nicely differentiated and water contour lines are distinct. That makes it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land. The color scheme is much easier on the eye.
- Wireless Connectivity: Integrated wireless connectivity with the Lowrance® LINK App and other onboard devices, allows you to download software updates and custom C-MAP® Genesis maps directly to the display and offers wireless smartphone viewing/tablet control of HDS Carbon displays.
- Network All Components: Plug-and-play compatibility with Lowrance performance modules, including Broadband Radar™, SonicHub®2 Marine Audio, SiriusXM® Marine Weather and audio, Class B AIS and DSC VHF, as well as industry-leading technologies, like Mercury® VesselView® Link, Bluetooth® control of Power-Pole® shallow water anchors equipped with the C-Monster™ Control System and the SmartSteer™ interface, featuring control of MotorGuide® Xi5 trolling motor and the Lowrance® Outboard Pilot.
Display
Resolution 1280 x 720 Brightness > 1200 nits Type 9” IPS Touch Screen Multi-Touch Viewing Angle 80° top/bottom, 80° left/right Display
Resolution 1024 x 600 Brightness > 1200 nits Type 7” IPS Touch Screen Multi-Touch Viewing Angle 80° top/bottom, 80° left/right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 33.12 W (2.4 A at 13.8 V DC) Recommended Fuse 3.5A Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (In Power Cable) Ethernet 1 port HDMI Video In N/A Analog Video In 1 port (optional cable) USB N/A Card Slots 2 slots microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic AVAILABLE OPTION 1:
Active Imaging 3-IN-1 Transducer: Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation.7.6 m (25 ft) cable with 9 pin connector. Part Number (000-14489-001)
Active Imaging Transducers
- Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
- Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
- Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation
- Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
- Active Imaging utilizes the latest techniques in sonar signal generation
- Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
- Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features
- Active Imaging sonar offers no compromise high resolution detail to users
- 800kHz operation covers many use cases and ranges.
- With 800kHz range and resolution capabilities users do not need to choose between seeing in
High detail or seeing far.
- High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
- Active Imaging 3-IN-1 transducers combine industry leading CHIRP sonar with new Active Imaging Side and Down views giving users total coverage with award winning sonar
- Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
AVAILABLE OPTION 2:
Lowrance/Simrad StructureScan 3D Transducer and Module [Lowrance/Simrad Part Number: 000-12395-001] – RRP $1399
Lowrance StructureScan® 3D allows anglers to see fish, structure and bottom contour in a stunning three-dimensional view. StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high-resolution, 180-degree, three-dimensional view beneath your boat. With this unique imaging view, anglers gain a better understanding of where fish and structure are located in relation to their boat. The picture-like, three-dimensional views are displayed on the Lowrance HDS Gen3 series of fishfinder/chartplotters, when used in combination with the SideScan 3D Skimmer® transducer and StructureScan® 3D module.
* StructureScan® 3D
StructureScan 3D is powered by a multi-beam sonar technology that produces revealing images with stunning detail by converting scans of underwater terrain and fish-holding structure into high-resolution, 180-degree, three-dimensional views.* Easy-to-Understand Sonar Images
View 3D images from any angle with ScanTrack™ pan-tilt-rotate control using on-screen touch commands and easy-to-use, preset viewing positions.* Find Key Fishing Areas Faster
StructureScan® 3D allows anglers to more easily understand where fish and fish-holding structure are located in relation to their boat. By slowly idling over a potential fishing area with the wide, 180-degree scanning range, anglers can quickly search for key areas and cover ─ such as abrupt depth changes, points, ditches, rockpiles, brushpiles, weedbeds standing timber, wrecks and more.* Unrivaled SideScan Image Clarity
To ensure the clearest possible SideScan views, the StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance.* High Definition (HD) and Super-Wide 3D Scanning
The contours below the water’s surface can be shown to the sides of the boat ─ up to 600 feet port and starboard ─ with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including two-dimensional DownScan Imaging™ and StructureScan® HD, and the new, realistic three-dimensional views. Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively.
* Leading Edge™ Scanning Reference
The Leading Edge™ scanning reference provides a clear graphical illustration of sonar beams as they intersect with bottom contours. The depth and range of the most recently scanned area are shown as red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth.* SelectScan™ Target Identification
SelectScan™ automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before.* Vertical Enhancement Control
Vertical Enhancement is a user-selectable scale that will apply on-screen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. Vertical Enhancement makes even the slightest depth changes more visible.* Waypoint Overlay
Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover.* Automatic 3D Image Settings
Fine-tuned 3D image settings are set by your HDS Gen 3 default configuration and StructureScan 3D Module. Adjustments can be made to Surface Clarity and Contrast settings using the on-screen slider-bar. Surface Clarity reduces on-screen surface clutter, by decreasing the sensitivity of the receiver near the surface. Contrast lightens/darkens the color palette to make fish and structure easier to see.* Ethernet Connectivity
Ethernet ports allow connectivity for up to three networked devices.* Enhanced SideScan Skimmer® Transducer Design
SPECIFICATIONS:
Overview
* Transmit Power Max RMS: 500W
* Cable Length 20 ft/ 6m
* Trandsucer Frequencies Enhanced 455 kHz
Sonar
* 600 feet
* EchoSounder Frequencies Enhanced 455 kHz
* EchoSounder Output Power Max RMS: 500W
* SideScan Imaging:
– Max Range: 600 ft./183 m
– Track bottom: 35 mph/56 kph
– Mark objects: 15 mph/24 kph
– Optimum imaging: 2-8 mph/3-13 kph
* DownScan Imaging™
– Max Depth: 300 ft / 92 m
– Track bottom: 35 mph/56 kph
– Mark objects: 2-8 mph/3-13 kph
– Optimum imaging: 2-8 mph/3-13 kph
Technical/Environmental
* Product Weight 1.8 lbs \ 0.816 kg
* Product Length 8.26” \ 210 mm
Power
* Power Consumption Max: .75A, Typical: .60A, Inrush: 4.7A pk
* Power Supply (Supply Voltage) 12 vDC
* Input Voltage 10V – 17 VDC
Other
* Cable 20 ft/ 6m
* Part #: 000-12395-001
* AUD RRP: $1,399.00WHAT’S IN THE BOX:
* Lowrance/Simrad StructureScan 3D Transom Mount Transducer (Part Number Individually: 000-12396-001)
* Lowrance/Simrad StructureScan 3D Module (Part Number Individually: 000-12397-001)
* Power Cable (Part Number Individually: 000-00128-001)
* 15ft Ethernet Cable (Part Number Individually: 000-00127-29)
* DocumentationAVAILABLE OPTION 3:
Navionics Gold Plus Australia Wide and New Zealand Boat Navigation Chart MSD/PLN50XG (also known as XL9) – suits Lowrance, Simrad, Raymarine & other popular units – RRP $368.55 *NEW*
Navionics Gold Plus is the most popular chart with boaters and fishermen all over the world, offering the largest coverage areas along with the absolute best detail. A Gold chart can seamlessly cover an entire continent and yet be able to zoom down to a resolution of 1 meter (3ft), with an abundance of data derived from the best available sources. Features include a clear, easy to use, familiar paper-like display of all detail available from the best marine nautical charts, plus:
* Tides & currents
* Port plans
* Navigation aids
* Marsh areas
* Spot soundings and depth contours
* Detailed Marine Park Zones (i.e. Green, Yellow Zones) of Moreton Bay Marine Park & Great Barrier Reef Marine Park (GBRMP)
* Further the Plus card also features a contour line mode for compatible units* Auto Routing Feature included
Coverage:
Australia wide including Norfolk Islands. As well as New Zealand & Pacific.
Suitability:
Suits current model plotters that accept Micro SD or SD charts. Including:
* Lowrance Elite Range
* Lowrance HDS Range
* Raymarine Units
* Humminbird Units
* Simrad NSS evo UnitsIf you are unsure whether this chart will suit your unit, just let us know the model of your unit and we can assist you in getting the right chart to suit your needs.
*These are genuine Navionics Charts that are brand new, unused and come with full Australian Warranty.
Warranty:
We are an authorised Australian Navionics retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Navionics chart is purchased overseas or from a non-authorised Navionics retailer it may not work in your unit, as we have found counterfeit cards can corrupt your hardware.*Specifications and features from suppliers’ information. If you have any questions or require any advice just let us know we are happy to help.
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14903-001 -
Sounder-GPS Combos, Sounders and Fishfinders
Lowrance HDS-9 LIVE 9in Touch Combo
Lowrance HDS-9 Live in Touch Touchscreen Sounder-Fishfinder/GPS-Chartplotter Combo (Display) [Part Number: 000-14905-001 ] – RRP $3249
DETAILS
The latest and greatest from Lowrance! Introducing to you the all new Lowrance HDS LIVE 9! This has the most advanced sonar technology with dual channel 1kw chirp capability, quad core processors, ultra bright SolarMAX HD Screen, Built in Structure Scan HD, Video input and output, WIFI, Bluetooth and smartphone Integration .
Unlike other Lowrance HDS models and fish finders on the market, The Lowrance HDS Live comes with Australia and New Zealand Wide Built in C-map charting, giving you the best charting possible built into the unit with no extras to pay! Marry this up with the all new 3-in-1 Active imaging transducer and you’ll be set and ready to go fishing!
Some new cool features which are included in the new HDS Live are;
- NEW Active Imaging™
- StructureScan® 3D
- Active Imaging with FishReveal™
- LiveSight™ real-time sonar
- C-MAP® Enhanced mapping with 1-foot contours
- C-MAP® Easy Routing
- Navionics® Autorouting and C-MAP Genesis Live mapping
- Onscreen text messages and call notifications
- LiveCast™ smartphone connection, which allows you to display video, Google Maps and fishing data on your fishfinder display
Key Features
- Active Imaging 3-in-1 Transducer required (not included)
- NEW! Active Imaging™ 3-in-1 (CHIRP/SideScan/DownScan)
- Active Imaging 2-in-1 ready
- LiveSight™ real-time sonar compatible
- Smartphone notifications
- C-MAP Genesis Live onscreen mapping
- StructureScan® 3D with Active Imaging enhancements – Coming Fall 2018
- High-performance quad-core processor
- FishReveal Smart Target View
- Full high-definition HDS SolarMAX™ HD multi-touch screen with the widest range of viewing angles – viewable even through polarized sunglasses
- Preloaded high-detail C-MAP® US Enhanced charts with 1-foot contours on 4,000-plus lakes
- C-MAP Easy Routing, Navionics Autorouting capability
- Dual-Channel CHIRP – dual sonar-range coverage from the same transducer
- Live Network Sonar – cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers
- Wireless and Bluetooth® connectivity
- Heat Map feature allows anglers to see trends in water temperature changes to quickly target key fishing areas
- Enhanced Surface Clarity lets you see more fish targets near the surface
- Quick Access Control Bar provides one–touch access to system controls
- Built-in CHIRP and Broadband Sounder™
- SmartSteer™ control for Xi5 Trolling Motor and Outboard Pilot
- Radar and SonicHub®2 audio server connectivity
- NMEA 2000® engine support
- Optional mapping upgrades include C-MAP, Navionics® and more
Lowrance HDS LIVE Advantages:
- Best Screens: You will have an easier time viewing fish, structure and bottom detail on bright and clear SolarMAX™ HD screens that offers clean and crisp views from any angle, in direct sunlight – even through polarized sunglasses.
Easy and Efficient Interface: On-the-water adjustments will be quicker and easier with the refreshed HDS interface designed with a simpler feature layout to deliver next-level ease of use and efficiency. - Active Imaging: See structure and cover with a new level of refined detail at a range unmatched by anyone else with new, Lowrance Active Imaging. Active Imaging is available with 3-in-1 transducer (CHIRP, SideScan and DownScan Imaging) and Active Imaging 2-in-1 transducer (SideScan and DownScan Imaging) options.
- View all Structure Imaging – Side-by-Side: For the first time, you can get a side-by-side view of all your structure imaging technology with the enhanced capabilities of HDS LIVE, which supports simultaneous viewing of StructureScan 3D, SideScan and DownScan Imaging™ panels.
- Most Advanced Fishfinder Technology: Simultaneously view CHIRP Sonar with Active Imaging to get the best possible view of fish and structure, below and to the sides of your boat.
- LiveSight: Get live views of fish movements across the bottom, in and around cover and structure with new, revolutionary LiveSight™ sonar. Capable of showing views beneath, or in front of your boat, LiveSight™ is at its best when trolling or fishing from a single spot. HDS LIVE comes LiveSight™ ready, so all you need to do is mount the LiveSight™ transducer and get after the fish.
- C-MAP Genesis LIVE: Create your own high-definition 1/2-foot contour maps – in real time – on your HDS LIVE screen with C-MAP Genesis Live.
- Smartphone Notifications: Keep your eyes on the fish and never miss an important text or call with smartphone notifications built into HDS LIVE. Turn off phone notifications for uninterrupted fishing, or leave them on to receive popup notifications on the screen of your HDS LIVE display.
- LiveCast smartphone integration : You no longer have to choose between watching the big game and spending a day on the water with LiveCast™ smartphone integration. Watch video, view Google maps and fishing data in full high-definition on the screen of your HDS LIVE 16 display via the HDMI connection. View data from your smartphone and keep your eye on the fish with a LiveCast-sonar split screen.
- FishReveal™ Smart Target View: Makes fish easier to see on DownScan Imaging™ by combining crystal-clear CHIRP sonar fish targets with superior, high-resolution views of bottom detail, structure and bait fish.
- High Performance Processor: Whether panning the chart, tracking back through your sonar history or creating a Genesis LIVE map, you will get responsive, smooth operation with no lag from the quad-core processor at the heart of HDS LIVE. The high- performance processor can easily drive today’s technology, like Active Imaging, LiveSight sonar, Genesis Live, StructureMap, Live Network sonar with power to spare for future innovations.
- New, Modern, Low-Profile Design: Enhance the look of your console with the new, zero-edge glass design of HDS LIVE, featuring the exceptional crispness, vibrant images and extreme viewing angles of SolarMAX™ HD technology. Create clean, sleek look at the console with an HDS LIVE flush mount.
- Larger, Programmable Keys: It’s easier than ever to quickly access functions with the larger keys on HDS LIVE — no matter the conditions; plus with four programmable keys, you can set up one-touch access to the features you use the most
- 6-way Split Screen View: See more information — all at the same time — with the new, six-screen split offered on HDS16 LIVE fishfinder/chartplotters.
- Live Network Sonar: Cover more water and mark fish targets more clearly from a network of CHIRP sonar transducers. Get sonar views from bow-mounted transducer and the in-hull or transom-mounted transducer at the same time on the same display.
- Dual-Channel CHIRP: Deep water and trolling anglers will never miss a fish, watching two Lowrance CHIRP frequencies at the same time via a dual-channel CHIRP split screen. Run a High CHIRP panel for the best target separation close to the bottom or in tight schools, a Medium CHIRP panel to cover the widest area – ideal for watching bait schools under a transducer in shallow water, or go deeper with a Low CHIRP panel to cover more of the water column.
- C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass, shoals and other fixed navigational hazards. Requires C-MAP MAX-N+ charts, Navionics+ or Navionics Platinum charts.
- C-MAP Navigation Palette: Enhances the readability of C-MAP charts, especially near shore, where the colors used for land, docks, anchorage areas, water, and channels are nicely differentiated and water contour lines are distinct. That makes it easy to tell where the boat is in relation to a channel, navaid, ledges and drop-offs, or a point of land. The color scheme is much easier on the eye.
- Wireless Connectivity: Integrated wireless connectivity with the Lowrance® LINK App and other onboard devices, allows you to download software updates and custom C-MAP® Genesis maps directly to the display and offers wireless smartphone viewing/tablet control of HDS Carbon displays.
- Network All Components: Plug-and-play compatibility with Lowrance performance modules, including Broadband Radar™, SonicHub®2 Marine Audio, SiriusXM® Marine Weather and audio, Class B AIS and DSC VHF, as well as industry-leading technologies, like Mercury® VesselView® Link, Bluetooth® control of Power-Pole® shallow water anchors equipped with the C-Monster™ Control System and the SmartSteer™ interface, featuring control of MotorGuide® Xi5 trolling motor and the Lowrance® Outboard Pilot.
Compatible
- Active Imaging 3-in-1
- StructureScan 3D with Active Imaging
- LiveSight Sonar
- Point-1 Antenna support (external)
- Precision-9 Compass compatibility
- Broadband 4G Radar, 000-10419-001
- Broadband 3G Radar, 000-10418-001
- Outboard Pilot Cable Steer Pack, 000-11749-001
- Outboard Pilot Hydraulic Pack, 000-11748-001
- SonicHub2 Marine Audio Server Pack, 000-12301-001
- WM-3 SiriusXM Weather and Radio Module, 000-11076-001
- Connects and communicates with HDS Carbon and HDS Gen3 multifunction displays
- Dual Ethernet networking port
- Micro-C connection for NMEA 2000® devices
- Video input via optional adapter cable
- NMEA 2000® Starter Kit, 000-0124-69
- Supported by Lowrance Service & Support program
*Some features requires additional component purchase.
Display
Resolution 1280 x 720 Brightness > 1200 nits Type 9” IPS Touch Screen Multi-Touch Viewing Angle 80° top/bottom, 80° left/right Electrical
Supply Voltage 12 V DC (10 – 17 V DC min – max) Power Consumption – MAX 40.02 W (2.9 A at 13.8 V DC) Recommended Fuse 4A Environmental
Operating Temp Range -15°C to +55°C (5°F to 131°F) Storage Temp Range -20°C to +60°C (4°F to 140°F) Waterproof Rating IPX6 and IPX7 Connections
NMEA 2000 1 port (Micro-C) NMEA 0183 1 port (In Power Cable) Ethernet 2 ports HDMI Video In N/A Analog Video In 1 port (optional cable) USB N/A Card Slots 2 slots microSD Wireless Built-in 802.11 b/g/n Bluetooth Bluetooth 4.0 with support for Bluetooth Classic AVAILABLE OPTION 1:
Active Imaging 3-IN-1 Transducer: Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation.7.6 m (25 ft) cable with 9 pin connector. Part Number (000-14489-001)
Active Imaging Transducers
- Active Imaging is a new scanning sonar technology that provides incredibly detailed, high resolution imaging sonar without sacrificing any range
- Active Imaging transducers accomplish this by better directing the SideScan beams which increases resolution and improves range performance
Active Imaging is available in two models
- Active Imaging 3-IN-1 combines the new Active Imaging scanning sonar with a traditional Medium/High CHIRP sonar element for easy single transducer installation
- Active Imaging operates at 800kHz or 455kHz with maximum ranges of 150ft (800kHz) or 300ft (455kHz)
Active imaging Technology
- Active Imaging utilizes the latest techniques in sonar signal generation
- Active Imaging transducers are constructed of a polymer that reacts to sound waves more closely to water. This ensures that no sonar signal is lost during transmit or receive
- Active Imaging transducers include separate sonar elements for SideScan transmit and receive Separating transmit and receive allows Active Imaging to have an incredibly fast ping speed (Ping speed directly correlates to image resolution). Additionally, these separate elements focus more of the sonar signal outwardly, increasing the sonar signal to the sides and leading to better range performance
Key Features
- Active Imaging sonar offers no compromise high resolution detail to users
- 800kHz operation covers many use cases and ranges.
- With 800kHz range and resolution capabilities users do not need to choose between seeing in
High detail or seeing far.
- High resolution IPS screens of NSS evo3 and HDS Live show the full image, allowing the user to see the entire underwater environment
- Active Imaging 3-IN-1 transducers combine industry leading CHIRP sonar with new Active Imaging Side and Down views giving users total coverage with award winning sonar
- Active Imaging transducers do not require any modules or extra hardware for use with next-generation displays
AVAILABLE OPTION 2:
Lowrance/Simrad StructureScan 3D Transducer and Module [Lowrance/Simrad Part Number: 000-12395-001] – RRP $1399
Lowrance StructureScan® 3D allows anglers to see fish, structure and bottom contour in a stunning three-dimensional view. StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high-resolution, 180-degree, three-dimensional view beneath your boat. With this unique imaging view, anglers gain a better understanding of where fish and structure are located in relation to their boat. The picture-like, three-dimensional views are displayed on the Lowrance HDS Gen3 series of fishfinder/chartplotters, when used in combination with the SideScan 3D Skimmer® transducer and StructureScan® 3D module.
* StructureScan® 3D
StructureScan 3D is powered by a multi-beam sonar technology that produces revealing images with stunning detail by converting scans of underwater terrain and fish-holding structure into high-resolution, 180-degree, three-dimensional views.* Easy-to-Understand Sonar Images
View 3D images from any angle with ScanTrack™ pan-tilt-rotate control using on-screen touch commands and easy-to-use, preset viewing positions.* Find Key Fishing Areas Faster
StructureScan® 3D allows anglers to more easily understand where fish and fish-holding structure are located in relation to their boat. By slowly idling over a potential fishing area with the wide, 180-degree scanning range, anglers can quickly search for key areas and cover ─ such as abrupt depth changes, points, ditches, rockpiles, brushpiles, weedbeds standing timber, wrecks and more.* Unrivaled SideScan Image Clarity
To ensure the clearest possible SideScan views, the StructureScan 3D transducer design has been enhanced with an increased number of sensors for greater imaging performance.* High Definition (HD) and Super-Wide 3D Scanning
The contours below the water’s surface can be shown to the sides of the boat ─ up to 600 feet port and starboard ─ with incredibly detailed, high-definition views. StructureScan® 3D provides multiple views, including two-dimensional DownScan Imaging™ and StructureScan® HD, and the new, realistic three-dimensional views. Using preset virtual point-of-view angles or ScanTrack™ pan-tilt-rotate control mode, you can adjust the view and perspective beneath your boat. Combine custom HD and 3D views to increase your understanding of how fish relate to cover and to search fishing areas more effectively.
* Leading Edge™ Scanning Reference
The Leading Edge™ scanning reference provides a clear graphical illustration of sonar beams as they intersect with bottom contours. The depth and range of the most recently scanned area are shown as red fan-shaped markers directly under the boat. Leading Edge also includes a depth scale that shows greater depth detail as you zoom in, giving you a better sense of target depth.* SelectScan™ Target Identification
SelectScan™ automatically shades fish-holding cover and suspended targets in a color that contrasts the selected color palette, making target identification quicker and easier than ever before.* Vertical Enhancement Control
Vertical Enhancement is a user-selectable scale that will apply on-screen emphasis to vertical drops and crucial depth contour changes, making them easier to identify relative to the surrounding underwater terrain. Vertical Enhancement makes even the slightest depth changes more visible.* Waypoint Overlay
Revisiting fishing areas, structure and other underwater features is easy with the Waypoint Overlay feature. Use the waypoint keypad to save a waypoint at the boat location, or switch to cursor mode, and save a waypoint over specific targets, baitfish or cover.* Automatic 3D Image Settings
Fine-tuned 3D image settings are set by your HDS Gen 3 default configuration and StructureScan 3D Module. Adjustments can be made to Surface Clarity and Contrast settings using the on-screen slider-bar. Surface Clarity reduces on-screen surface clutter, by decreasing the sensitivity of the receiver near the surface. Contrast lightens/darkens the color palette to make fish and structure easier to see.* Ethernet Connectivity
Ethernet ports allow connectivity for up to three networked devices.* Enhanced SideScan Skimmer® Transducer Design
SPECIFICATIONS:
Overview
* Transmit Power Max RMS: 500W
* Cable Length 20 ft/ 6m
* Trandsucer Frequencies Enhanced 455 kHz
Sonar
* 600 feet
* EchoSounder Frequencies Enhanced 455 kHz
* EchoSounder Output Power Max RMS: 500W
* SideScan Imaging:
– Max Range: 600 ft./183 m
– Track bottom: 35 mph/56 kph
– Mark objects: 15 mph/24 kph
– Optimum imaging: 2-8 mph/3-13 kph
* DownScan Imaging™
– Max Depth: 300 ft / 92 m
– Track bottom: 35 mph/56 kph
– Mark objects: 2-8 mph/3-13 kph
– Optimum imaging: 2-8 mph/3-13 kph
Technical/Environmental
* Product Weight 1.8 lbs \ 0.816 kg
* Product Length 8.26” \ 210 mm
Power
* Power Consumption Max: .75A, Typical: .60A, Inrush: 4.7A pk
* Power Supply (Supply Voltage) 12 vDC
* Input Voltage 10V – 17 VDC
Other
* Cable 20 ft/ 6m
* Part #: 000-12395-001
* AUD RRP: $1,399.00WHAT’S IN THE BOX:
* Lowrance/Simrad StructureScan 3D Transom Mount Transducer (Part Number Individually: 000-12396-001)
* Lowrance/Simrad StructureScan 3D Module (Part Number Individually: 000-12397-001)
* Power Cable (Part Number Individually: 000-00128-001)
* 15ft Ethernet Cable (Part Number Individually: 000-00127-29)
* DocumentationAVAILABLE OPTION 3:
Navionics Gold Plus Australia Wide and New Zealand Boat Navigation Chart MSD/PLN50XG (also known as XL9) – suits Lowrance, Simrad, Raymarine & other popular units – RRP $368.55 *NEW*
Navionics Gold Plus is the most popular chart with boaters and fishermen all over the world, offering the largest coverage areas along with the absolute best detail. A Gold chart can seamlessly cover an entire continent and yet be able to zoom down to a resolution of 1 meter (3ft), with an abundance of data derived from the best available sources. Features include a clear, easy to use, familiar paper-like display of all detail available from the best marine nautical charts, plus:
* Tides & currents
* Port plans
* Navigation aids
* Marsh areas
* Spot soundings and depth contours
* Detailed Marine Park Zones (i.e. Green, Yellow Zones) of Moreton Bay Marine Park & Great Barrier Reef Marine Park (GBRMP)
* Further the Plus card also features a contour line mode for compatible units* Auto Routing Feature included
Coverage:
Australia wide including Norfolk Islands. As well as New Zealand & Pacific.
Suitability:
Suits current model plotters that accept Micro SD or SD charts. Including:
* Lowrance Elite Range
* Lowrance HDS Range
* Raymarine Units
* Humminbird Units
* Simrad NSS evo UnitsIf you are unsure whether this chart will suit your unit, just let us know the model of your unit and we can assist you in getting the right chart to suit your needs.
*These are genuine Navionics Charts that are brand new, unused and come with full Australian Warranty.
Warranty:
We are an authorised Australian Navionics retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Navionics chart is purchased overseas or from a non-authorised Navionics retailer it may not work in your unit, as we have found counterfeit cards can corrupt your hardware.*Specifications and features from suppliers’ information. If you have any questions or require any advice just let us know we are happy to help.
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14905-001 -
Sounders and Fishfinders
Lowrance Hook-3x Sounder/Fishfinder Sun Cover (000-10495-001)
### LOWRANCE JULY MID-YEAR SALE – ONLINE ONLY DEAL – MUST END 31/07/17 ###
Lowrance Hook-3x Sounder/Fishfinder Sun Cover (000-10495-001)
Suits only Lowrance Hook-3x Sounder/Fishfinder.
*Specifications from suppliers’ information.
SKU: 000-10495-001 -
Monthly Specials, Sounders and Fishfinders
Lowrance Hook2 12″ – 12inch with Tripleshot Transducer and Full Australia wide GPS
Monthly Specials, Sounders and FishfindersLowrance Hook2 12″ – 12inch with Tripleshot Transducer and Full Australia wide GPS
Lowrance Hook2 12″ – 12inch Tripshot Combo with Australia Wide Maps and 3-1 transducer.
Lowrance is well renowned for the ease of use of their products, the new Hook brings you the worlds easiest to use model ever!
We are super excited with this new product from Lowrance, so far the reviews have been great for all the models and they are running out super-fast.
We currently have stock but be quick, this new product from Lowrance won’t be one collecting dust on our shelves!
Have a read of what Lowrance have to say about these great new units below;
Lowrance Hook2 12 – 12inch with Tripleshot Transducer and Full Australia wide GPS (Part Number 000-14408-001) RRP- $2049
The world’s easiest fishfinder, HOOK² 12 TripleShot offers simple menus, easy access to key functions and Autotuning sonar. Powered by proven Lowrance® performance, HOOK² 12 features TripleShot 3-in-1 sonar with wide-angle, High CHIRP coverage, SideScan and DownScan Imaging™. Just plug it in and fish. Yes, it’s that easy.
The world’s easiest fish finder, HOOK² 12 TripleShot helps you have a more enjoyable day on the water by removing the hassle of making adjustments with a simple menu layout, easy access to key features and game-changing Lowrance® Autotuning sonar. You will be free to focus on fishing with Autotuning sonar, a new feature that actively adjusts sonar settings as fishing conditions change. You just fish and let HOOK² take care of sonar performance – performance powered by TripleShot 3-in-1 sonar. Anglers will cover more water in less time and find fish and fish-holding structure more easily with TripleShot 3-in-1 sonar. TripleShot features wide-angle, High CHIRP sonar — with double the sonar coverage of most fish finders — plus, SideScan and DownScan Imaging™. Returning to your favorite fishing spot or finding a new one is easy with the navigation features in HOOK² .
KEY FEATURES
12-inch SolarMAX™ Display
Automated sonar settings
Double the coverage of standard sonar
Easy to find fish with double the sonar coverage of traditional fishfinders
Easiest-to-use menus
Optimized keypad with one-touch access to key features
Lowrance® Tripleshot™ 3-in-1 sonar with High CHIRP, SideScan and DownScan Imaging™
Mapping options include C-MAP®, C-MAP Genesis, Navionics® and more
microSD card sloDisplay
Display Size 12.0in (305mm)
Display Resolution 1280 x 800
Display Type Color TFTSonar
Sonar Broadband Frequency 200 kHz/High CHIRP
Sonar DownScan™/SideScan Frequency 455/800 kHz
Sonar Broadband Max Power 200w RMS
Sonar DownScan™/SideScan Max Power 500w RMS
Sonar Broadband Max Depth 500ft (152m)
Sonar DownScan™/SideScan Max Depth DownScan™: 300ft (91.4m) SideScan: 300ft (91.4m) Left and Right
Sonar Alarm Shallow, Deep, Arrival, Depth
TrackBack Yes
Temperature Readings YesGPS/Navigation
GPS Type Internal high-sensitivity WAAS + EGNOS + MSAS
Waypoints 3000
Routes 100
Trails 100 plots with up to 10,000 points per trailTechnical/Environmental
Power Supply 10-17 vDC (12V systems)
Waterproof Yes IPX7
Micro SD Card Slot 1
Width 13.34in (339mm)
Height 8.51in (216mm)
Depth 4.53in (115mm)WHAT’S IN THE BOX:
000-11021-001
Gimbal Bracket & Knobs for 12″ Lowrance000-14191-001
HOOK2 7″/9″/12″ Corner Clips000-14029-001
TripleShot Skimmer Transducer000-14193-001
TripleShot Transom Bracket000-14172-001
HOOK2 5″/7″/9″/12″ Power Cable
000-0127-50
Fuse and Fuse Holder
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14408-001 -
Monthly Specials, Sounders and Fishfinders
Lowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder – No GPS / Downscan
Monthly Specials, Sounders and FishfindersLowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder – No GPS / Downscan
### LOWRANCE SUMMER SALE – BRAND NEW MODEL JUST RELEASED – VERY LIMITED STOCK, SELLING OUT FAST – ONLY WHILE STOCKS LAST###
Lowrance is well renowned for the ease of use of their products, the new Hook brings you the worlds easiest to use model ever!
We are super excited with this new product from Lowrance, so far the reviews have been great for all the models and they are running out super-fast.
We currently have stock but be quick, this new product from Lowrance won’t be one collecting dust on our shelves!
Have a read of what Lowrance have to say about these great new units below;
Lowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder – No GPS / Downscan (Part Number 000-14013-001) – RRP $129.00
The world’s easiest fishfinder, HOOK2 4x Bullet offers simple menus, easy access to key functions and Autotuning sonar. Powered by proven Lowrance® performance, HOOK2 4x features wide-angle, Broadband sonar coverage. Just plug it in and fish. Yes, it’s that easy.
The world’s easiest fish finder, HOOK2 4x Bullet helps you have a more enjoyable day on the water by removing the hassle of making adjustments with a simple menu layout, easy access to key features and game-changing Lowrance® Autotuning sonar. You will be free to focus on fishing with Autotuning sonar, a new feature that actively adjusts sonar settings as fishing conditions change. You just fish and let HOOK2 do the rest. Anglers will cover more water in less time with proven HOOK2 Bullet wide-angle, Broadband sonar, offering double the sonar coverage of most fish finders.
4-inch SolarMAX™ Display
• Automated sonar settings
• Easy to find fish with double the sonar coverage of traditional fishfinders
• Easiest-to-use menus
• Optimized keypad with one-touch access to key features
• Proven Lowrance® wide-angle, Broadband sonar
• Easy front-dash or quick-release bracket mount
KEY FEATURES:
• 4-inch SolarMAX™ Display
• Automated sonar settings
• Easy to find fish with double the sonar coverage of traditional fishfinders
• Easiest-to-use menus
• Optimized keypad with one-touch access to key features
• Proven Lowrance® wide-angle, Broadband sonar
• Easy front-dash or quick-release bracket mount
SPECIFICATIONS:
Display
Display Size 4.3in (109mm)
Display Resolution 480 x 272
Display Type Color TFTSonar
Sonar Frequency 200 kHz
Sonar Max Power 200w RMS
Sonar Max Depth 500ft (152m)
Sonar Alarm Shallow, Fish, DepthGPS/Navigation
N/A
Technical/Environmental
Power Supply 10-17 vDC (12V systems)
Waterproof Yes
Width 6.5in (165mm)
Height 3.8in (96mm)
Depth 3.3in (84mm)WHAT’S IN THE BOX:
000-14170-001
HOOK2 4″/5″ Quick Release Bracket
000-14027-001
Bullet Skimmer Transducer
000-14192-001
Bullet/SplitShot Transom Bracket
000-0127-50
Fuse and Fuse Holder
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14013-001 -
Monthly Specials, Sounders and Fishfinders
Lowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder/GPS – No Downscan
Monthly Specials, Sounders and FishfindersLowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder/GPS – No Downscan
### LOWRANCE SUMMER SALE – BRAND NEW MODEL JUST RELEASED – VERY LIMITED STOCK, SELLING OUT FAST – ONLY WHILE STOCKS LAST###
Lowrance is well renowned for the ease of use of their products, the new Hook brings you the worlds easiest to use model ever!
We are super excited with this new product from Lowrance, so far the reviews have been great for all the models and they are running out super-fast.
We currently have stock but be quick, this new product from Lowrance won’t be one collecting dust on our shelves!
Have a read of what Lowrance have to say about these great new units below;
Lowrance Hook2 4x with Bullet Skimmer Transducer – Sounder/Fishfinder/GPS – No Downscan (Part Number 000-14015-001) – RRP $159.00
The world’s easiest fishfinder, HOOK2 4x Bullet offers simple menus, easy access to key functions and Autotuning sonar. Powered by proven Lowrance® performance, HOOK2 4x features wide-angle, Broadband sonar coverage, plus a simple and accurate GPS Plotter. Just plug it in and fish. Yes, it’s that easy.
The world’s easiest fish finder, HOOK2 4x GPS Bullet helps you have a more enjoyable day on the water by removing the hassle of making adjustments with a simple menu layout, easy access to key features and game-changing Lowrance® Autotuning sonar. You will be free to focus on fishing with Autotuning sonar, a new feature that actively adjusts sonar settings as fishing conditions change. You just fish and let HOOK2 do the rest. Anglers will cover more water in less time with proven HOOK2 Bullet wide-angle, Broadband sonar, offering double the sonar coverage of most fish finders. Save waypoints, follow trails and navigate to your favorite fishing spot with the simple and accurate GPS Plotter built into the HOOK2 4x GPS Bullet display.
KEY FEATURES:
• 4-inch SolarMAX™ Display
• Automated sonar settings
• Easy to find fish with double the sonar coverage of traditional fishfinders
• Easiest-to-use menus
• Optimized keypad with one-touch access to key features
• Proven Lowrance® wide-angle, Broadband sonar
• Simple and accurate GPS Plotter
• Easy front-dash or quick-release bracket mount
SPECIFICATIONS:
Display
Display Size 4.3in (109mm)
Display Resolution 480 x 272
Display Type Color TFTSonar
Sonar Frequency 200 kHz
Sonar Max Power 200w RMS
Sonar Max Depth 500ft (152m)
Sonar Alarm Shallow, Fish, DepthGPS/Navigation
GPS Type Internal high-sensitivity WAAS + EGNOS + MSAS
Waypoints, Routes & Trails
Waypoints 1000*
Routes 6 routes (150 max. route point per route)*
Trails 7 trails (4,000 max. trail points)
*Waypoints and Routes share the same memory, saving more of one means less of the otherTechnical/Environmental
Power Supply 10-17 vDC (12V systems)
Waterproof Yes
Width 6.5in (165mm)
Height 3.8in (96mm)
Depth 3.3in (84mm)WHAT’S IN THE BOX:
000-14170-001
HOOK2 4″/5″ Quick Release Bracket
000-14027-001
Bullet Skimmer Transducer
000-14192-001
Bullet/SplitShot Transom Bracket
000-0127-50
Fuse and Fuse Holder
WARRANTY:
We are an authorised Australian Lowrance retailer, as such Full Australian Manufacturers Warranty is applicable. Please note if a Lowrance unit is purchased overseas or from a non-authorised Lowrance retailer you may not receive warranty coverage in Australia.*Specifications from suppliers’ information. Actual depth capabilities depend on transducer installation, bottom type & water conditions. All sonars typically read deeper in freshwater than in saltwater.
SKU: 000-14015-001
